选区激光熔化铝基复合材料研究进展

陈志刚; 王晓昕; 刘慧敏; 王力; 李妮; 孙美慧; 敖敏

选区激光熔化铝基复合材料研究进展

陈志刚¹,
王晓昕¹,
刘慧敏¹,
王力²,
李妮³,
孙美慧⁴,
敖敏^1, ,

1. 内蒙古工业大学材料科学与工程学院, 内蒙古呼和浩特 010051;
2. 西安建筑科技大学冶金工程学院功能材料加工国家地方联合工程研究中心, 陕西西安 710055;
3. 北京科技大学新材料技术研究院, 北京 100083;
4. 鞍钢集团北京研究院有限公司, 北京 102200

基金项目:

内蒙古自治区本级事业单位引进高层次人才科研支持项目

内蒙古自治区自然科学基金青年基金项目(2023QN05006)

详细信息

作者简介:
陈志刚,男,1997年生,研究生,主要从事铝基复合材料的研究。

通讯作者:
敖敏,女,1990年生,博士,讲师,主要从事金属材料腐蚀失效机制的研究。E-mail:aomin@imut.edu.cn

中图分类号: TG146.21
计量
- 文章访问数: 40
- HTML全文浏览量: 9
- PDF下载量: 10
- 被引次数: 0
出版历程
- 收稿日期: 2023-10-30

Research Progress in Selective Laser Melting of AluminumMatrix Composites

1. School of Materials Scienceand Engineering, Inner Mongolia University of Technology, Hohhot 010051, China;
2. National and Local Joint Engineering Research Center for Functional Materials Processing, School of Metallurgical Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, China;
3. Institute for Advanced Materials and Technology, Beijing University of Science and Technology, Beijing 100083, China;
4. Ansteel Beijing Research Institute Co., Ltd., Beijing 102200, China

摘要

摘要: 铝基复合材料是一种重要的轻量化材料,其在服役环境中的腐蚀行为与设备的安全运行密切相关。选区激光熔化(SLM)技术为复杂结构铝基复合材料部件的近净成形与快速制造提供了新的技术途径。本研究从SLM技术的制备原理、SLM铝基复合材料的力学和耐蚀性能的研究进展等3个方面进行综述,并对SLM铝基复合材料未来研究方向进行展望。
- 选区激光熔化 /
- 铝基复合材料 /
- 颗粒增强 /
- 腐蚀性能
Abstract: Aluminium matrix composites are an important lightweight material, and their corrosion behaviour in service environment is closely related to the safe operation of equipment. The selective laser melting (SLM) technology provides a new technological pathway for near-net-shaping and rapid manufacturing of the aluminium matrix composite parts with complex structures. In this study, the preparation principle of SLM technology, the research progress in the mechanical and corrosion resistance properties of SLM aluminium matrix composites are reviewed, and the future research direction of the SLM aluminium matrix composites is put forward.
- selective laser melting /
- aluminum matrix composites /
- particles reinforced /
- corrosion behavior

HTML全文

参考文献(35)

[1]	SINGH J, CHAUHAN A. Characterization of hybrid aluminum matrix composites for advanced applica-tions-A review[J]. Journal of Materials Research and Technology, 2016, 5(2): 159-169.
[2]	SAMAL P, VUNDAVILLI P R, MEHER A, et al. Re-cent progress in aluminum metal matrix composites: a review on processing, mechanical and wear properties[J]. Journal of Manufacturing Processes, 2020, 59: 131-152.
[3]	CHAK V, CHATTOPADHYAY H, DORA T L. A review on fabrication methods, reinforcements and mechanical properties of aluminum matrix composites[J]. Journal of Manufacturing Processes, 2020, 56: 1059-1074.
[4]	JIA H L, SUN H, WANG H Z, et al. Scanning stra-tegy in selective laser melting (SLM): a review[J]. The International Journal of Advanced Manufacturing Technology, 2021, 113(9-10): 2413-2435.
[5]	王力. 激光粉末床熔融高强度不锈钢显微组织调控与腐蚀行为研究[D]. 北京: 北京科技大学, 2023.
[6]	ZHANG X, YOCOM C J, MAO B, et al. Microstructure evolution during selective laser melting of metallic materials: a review[J]. Journal of Laser Applications, 2019, 31(3):031201.
[7]	FANG Z C, WU Z L, HUANG C G, et al. Review on residual stress in selective laser melting additive manufacturing of alloy parts[J]. Optics & Laser Techno-logy, 2020, 129: 106283.
[8]	DEBROY T, WEI H L, ZUBACK J S, et al. Additive manufacturing of metallic components - Process, structure and properties[J]. Progress in Materials Science, 2018, 92: 112-224.
[9]	ABOULKHAIR N T, SIMONELLI M, PARRY L, et al. 3D printing of aluminium alloys: Additive manufacturing of aluminium alloys using selective laser melting[J]. Progress in Materials Science, 2019, 106: 100578.
[10]	WANG P, ECKERT J, PRASHANTH K G, et al. A review of particulate-reinforced aluminum matrix composites fabricated by selective laser melting[J]. Transactions of Nonferrous Metals Society of China, 2020, 30(8): 2001-2034.
[11]	THIJS L, KEMPEN K, KRUTH J P, et al. Finestr-uctured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg Powder[J]. Acta Materialia, 2013, 61(5): 1809-1819.
[12]	MARTIN J H, YAHATA B D, HUNDLEY J M, et al. 3D printing of high-strength aluminium alloys[J]. Nature, 2017, 549(7672): 365-369.
[13]	KIM D K, WOO W, HWANG J H, et al. Stress partitioning behavior of an AlSi10Mg alloy produced by selective laser melting during tensile deformation using in situ neutron diffraction[J]. Journal of Alloys and Compounds, 2016, 686: 281-286.
[14]	HADADZADEH A, BAXTER C, AMIRKHIZ B S, et al. Strengthening mechanisms in direct metal laser sintered AlSi10Mg: comparison between virgin and recycled powders[J]. Additive Manufacturing, 2018, 23: 108-120.
[15]	WANG Z Y, ZHUO L C, YIN E H, et al. Microstructure evolution and properties of nanoparticulate SiC modified AlSi10Mg alloys[J]. Materials Science and Engineering: A, 2021, 808: 140864.
[16]	GAO C, LIU Z, XIAO Z, et al. Effect of heat treatment on SLM-fabricated TiN/AlSi10Mg composites: Microstructural evolution and mechanical properties[J]. Journal of Alloys and Compounds, 2021, 853: 156722.
[17]	ABOULKHAIR N T, EVERITT N M, ASHCROFT I, et al. Reducing porosity in AlSi10Mg parts processed by selective laser melting[J]. Additive Manufactu-ring, 2014, 1-4: 77-86.
[18]	Gu D, Wang H, Chang F, et al. Selective laser melting additive manufacturing of TiC/AlSi10Mg bulk-form nanocomposites with tailored microstructures and properties[J]. Physics Procedia, 2014, 56: 108-116.
[19]	ZHOU S Y, WANG Z Y, SU Y, et al. Effects of micron/submicron TiC on additively manufactured AlSi10Mg: a comprehensive study from computer simulation to mechanical and microstructural analysis[J]. JOM, 2020, 72(10): 3693-3704.
[20]	GAO C, WU W, SHI J, et al. Simultaneous enhancement of strength, ductility, and hardness of TiN/AlSi10Mg nanocomposites via selective laser melting[J]. Additive Manufacturing, 2020, 34: 101378.
[21]	LI X P, JI G, CHEN Z, et al. Selective laser melting of nano-TiB2 decorated AlSi10Mg alloy with high fracture strength and ductility[J]. Acta Materialia, 2017, 129: 183-193.
[22]	XI L X, ZHANG H, WANG P, et al. Comparative in-vestigation of microstructure, mechanical properties and strengthening mechanisms of Al-12Si/TiB2 fabricated by selective laser melting and hot pressing[J]. Ceramics International, 2018, 44(15): 17635-17642.
[23]	LIAO H L, ZHANG W Q, CHEN C P, et al. Hybrid reinforced aluminum matrix composites fabricated by selective laser melting[J]. Intermetallics, 2021, 131: 107080.
[24]	TAN Q Y, FAN Z Q, TANG X Q, et al. A novel st-rategy to additively manufacture 7075 aluminium alloy with selective laser melting[J]. Materials Science and Engineering: A, 2021, 821: 141638.
[25]	XI L X, DING K, ZHANG H, et al. In-situ synthe-sis of aluminum matrix nanocomposites by selective laser melting of carbon nanotubes modified Al-Mg-Sc-Zr alloys[J]. Journal of Alloys and Compounds, 2022, 891: 162047.
[26]	XU S Q, LI B L, LV Z X, et al. Microstructures and mechanical behaviors of reinforced aluminum matrix composites with modified nano-sized TiB2/SiC fabricated by selective laser melting[J]. Composites Communications, 2023, 37: 101439.
[27]	ZHENG T Q, PAN S H, MURALI N, et al. Selective laser melting of novel 7075 aluminum powders with internally dispersed TiC nanoparticles[J]. Materials Letters, 2022, 319: 132268.
[28]	JI Y C, DONG C F, KONG D C, et al. Design materials based on simulation results of silicon induced segregation at AlSi10Mg interface fabricated by selective laser melting[J]. Journal of Materials Science & Technology, 2020, 46: 145-155.
[29]	FITE J, ESWARAPPA PRAMEELA S, SLOTWIN-SKI J A, et al. Evolution of the microstructure and mechanical properties of additively manufactured AlSi10Mg during room temperature holds and low temperature aging[J]. Additive Manufacturing, 2020, 36: 101429.
[30]	WU J, WANG X Q, WANG W, et al. Microstructure and strength of selectively laser melted AlSi10Mg[J]. Acta Materialia, 2016, 117: 311-320.
[31]	XIAO Y K, BIAN Z Y, WU Y, et al. Effect of nano-TiB2 particles on the anisotropy in an AlSi10Mg alloy processed by selective laser melting[J]. Journal of Alloys and Compounds, 2019, 798: 644-655.
[32]	AO M, DONG C F, LI N, et al. Unexpected stress corrosion cracking improvement achieved by recrystallized layer in Al-Zn-Mg alloy[J]. Journal of Materials Engineering and Performance, 2021, 30(8): 6258-6268.
[33]	ZHANG S Z, CHEN Z, WEI P, et al. Wear proper-ties of graphene/zirconia biphase nano-reinforced aluminium matrix composites prepared by SLM[J]. Materials Today Communications, 2022, 30: 103009.
[34]	AO M, JI Y C, YI P, et al. Relationship between elements migration of α-AlFeMnSi phase and micro-galvanic corrosion sensitivity of Al-Zn-Mg alloy[J]. International Journal of Minerals, Metallurgy and Materials, 2023, 30(1): 112-121.
[35]	LI N, DONG C F, MAN C, et al. Insight into the localized strain effect on micro-galvanic corrosion behavior in AA7075-T6 aluminum alloy[J]. Corrosion Science, 2021, 180: 109174.