Citation: | LUO Zhangzeng, LI Hua, WEI Tao, LI Xiaobing, MA Yingche, LIU Kui. Application of γ-TiAl-based Alloy in Diesel Engine[J]. Development and Application of Materials, 2021, 36(3): 50-57. |
[1] |
任中杰,肖琨,罗鹰.轻质材料在汽车进气歧管中的应用[J].材料开发与应用,2010,25(2):93-98.
|
[2] |
李桂华,熊飞,龙江启.车身材料轻量化及其新技术的应用[J].材料开发与应用,2009,24(2):87-93.
|
[3] |
刘伟燕,王书伟.轻量化技术在汽车车身上的应用[J].汽车工程师,2011(2):50-54.
|
[4] |
冈田义夫,真木邦雄,安保定幸,等.汽油机用钛合金气门的开发[J].国外内燃机,2002,34(6):60-63.
|
[5] |
刘冰,范润华,孙家涛,等.TiAl基合金的研制及其在汽车上的应用[J].汽车技术,2005(3):29-31.
|
[6] |
盛文斌.金属型离心铸造TiAl基合金耐磨性研究[J].特种铸造及有色合金,2007,27(2):129-131.
|
[7] |
汤志鸣,汤文明,曹菊芳,等.SiC/TiAl界面固相反应研究[J].材料热处理学报,2008,29(3):17-21.
|
[8] |
吉林工业大学内燃机教研室.内燃机理论与设计-下册[M].北京:机械工业出版社,1977:251-258.
|
[9] |
姚勇,邸敏艳.轻质材料在汽车发动机上的应用[J].新技术新工艺,2003(7):42-44.
|
[10] |
蒋光福,李智勇,杨辉煌,等.发动机连杆轻量化设计[J].计算机辅助工程,2006,15(S1):131-133.
|
[11] |
陆传荣,贺晓亮,苗伟驰,等.高强度连杆轻量化设计研究[J].柴油机,2015,37(2):22-25.
|
[12] |
M Maurizi,R Lochmann,左彤梅,等.复合活塞销:轻量化设计新概念[J].国外内燃机,2016,48(3):38-41.
|
[13] |
胡振,乔信起,王渠东,等.发动机活塞轻量化的研究进展[J].小型内燃机与摩托车,2013,42(6):76-81.
|
[14] |
GEBAUER K.Performance,tolerance and cost of TiAl passenger car valves[J].Intermetallics,2006,14(4):355-360.
|
[15] |
张蕾蕾,陈达,林栋梁.TiAl金属间化合物研究现状及发展趋势[J].材料开发与应用,1995,10(5):44-47.
|
[16] |
CHEN G,PENG Y B,ZHENG G,et al.Polysynthetic twinned TiAl single crystals for high-temperature applications[J].Nature Materials,2016,15(8):876-881.
|
[17] |
杨锐.钛铝金属间化合物的进展与挑战[J].金属学报,2015,51(2):129-147.
|
[18] |
STARK A,OEHRING M,PYCZAK F,et al.Insitu observation of various phase transformation paths in Nb-rich TiAl alloys during quenching with different rates[J].Advanced Engineering Materials,2011,13(8):700-704.
|
[19] |
KIM Y W,KIM S L,DIMIDUK D,et al.Structrural Applications for High Temperatures[M],Warrendale:TMS,2008:215.
|
[20] |
陈玉勇,孔凡涛,崔宁.TiAl合金板材的制备与组织分析[J].中国材料进展,2015,34(5):379-382.
|
[21] |
KIM Y W,KIM S L.Advances in gammalloy materials-processes-application technology:successes,dilemmas,and future[J].JOM,2018,70(4):553-560.
|
[22] |
KELLER M M,JONES P E,PORTER W J,et al.The development of low-cost TiAl automotive valves[J].JOM,1997,49(5):42-44.
|
[23] |
NODA T.Application of cast gamma TiAl for automobiles[J].Intermetallics,1998,6(7-8):709-713.
|
[24] |
陈健,黄伯云,贺跃辉,等.TiAl基合金汽车发动机阀门的开发[J].材料导报,1998,12(3):14-16.
|
[25] |
LIU K,MA Y C,GAO M,et al.Single step centrifugal casting TiAl automotive valves[J].Intermetallics,2005,13(9):925-928.
|
[26] |
韩明臣,朱昱.TiAl合金汽车气门[J].汽车工艺与材料,1999(4):21-23
|
[27] |
陈文觉.γ-TiAl的性能及其当前在汽车中的应用和应用前景[J].国外金属热处理,1998,19(1):27-29.
|
[28] |
HANAMURA T,UEMORI R,TANINO M.Mechanism of plastic deformation of Mn-added TiAl L 10-type intermetallic compound[J].Journal of Materials Research,1988,3(4):656-664.
|
[29] |
SUN F S,CAO C X,YAN M G,et al.Alloying mechanism of beta stabilizers in a TiAl alloy[J].Metallurgical and Materials Transactions A,2001,32(7):1573-1589.
|
[30] |
SCHLOFFER M,RASHKOVA B,SCHOBERL T,et al.Evolution of the ωo phase in a β-stabilized multi-phase TiAl alloy and its effect on hardness[J].Acta Materialia,2014,64:241-252.
|
[31] |
KASTENHUBER M,KLEIN T,CLEMENS H,et al.Tailoring microstructure and chemical composition of advanced γ-TiAl based alloys for improved creep resistance[J].Intermetallics,2018,97:27-33.
|
[32] |
HUANG Z W.Ordered ω phases in a 4Zr-4Nb-containing TiAl-based alloy[J].Acta Materialia,2008,56(8):1689-1700.
|
[33] |
TIAN S W,JIANG H T,ZHANG G H,et al.Investigation on the initial oxidation behavior of TiAl alloy[J].Materials Research Express,2019,6(10):106595.
|
[34] |
SONG L,XU X J,YOU L,et al.Phase transformation and decompositionmechanisms of the βo(ω) phase in cast high Nb containing TiAl alloy[J].Journal of Alloys and Compounds,2014,616:483-491.
|
[35] |
HUANG L,LIAW P K,LIU C T.Microstructural control of Ti-Al-Nb-W-B alloys[J].Metallurgical and Materials Transactions A,2007,38(13):2290-2297.
|
[36] |
CHEN G L,XU X J,TENG Z K,et al.Microsegregation in high Nb containing TiAl alloy ingots beyond laboratory scale[J].Intermetallics,2007,15(5-6):625-631.
|
[37] |
HOLEC D,LEGUT D,ISAEVA L,et al.Interplay between effect of Mo and chemical disorder on the stability of β/βo-TiAl phase[J].Intermetallics,2015,61:85-90.
|
[38] |
SONG L,LIN J P,LI J S.Effects of trace alloying elements on the phase transformation behaviors of ordered ω phases in high Nb-TiAl alloys[J].Materials& Design,2017,113:47-53.
|
[39] |
KLEIN T,SCHACHERMAYER M,MENDEZ-MARTIN F,et al.Carbon distribution in multi-phase γ-TiAl based alloys and its influence on mechanical properties and phase formation[J].Acta Materialia,2015,94:205-213.
|