Volume 37 Issue 1
Jun.  2022
Turn off MathJax
Article Contents
Article Navigation >  Development and Application of Materials  > 2022  >  37(1): 77-83,91
YANG Jian, WANG Yi, WANG Zhiyong, XIONG Yaochen, WU Haihong. Research Progress on Sliding Electrical Contact Materials for Medium Voltage Slip Rings in Single Point Mooring System[J]. Development and Application of Materials, 2022, 37(1): 77-83,91.
Citation: YANG Jian, WANG Yi, WANG Zhiyong, XIONG Yaochen, WU Haihong. Research Progress on Sliding Electrical Contact Materials for Medium Voltage Slip Rings in Single Point Mooring System[J]. Development and Application of Materials, 2022, 37(1): 77-83,91.
shu

Research Progress on Sliding Electrical Contact Materials for Medium Voltage Slip Rings in Single Point Mooring System

  • 1. Offshore Oil Engineering Co., Ltd., Tianjin 300000, China;

  • 2. China Shipbuilding Jiujiang Jingda Technology Co., Ltd., Jiujiang 332000, China

  • Received Date: 2021-07-16
    Available Online: 2022-06-11
    Abstract
  • Here are reviewed the research progress of sliding electrical contact materials with high current-carrying density above 10 A/cm2 in the past 40 years, and summarized the current-carrying sliding contact performance of sliding electrical contact materials and the influence of sliding contact friction and wear parameters on the reliability of materials in service. This research can provide references for the future development of high-current sliding electrical contact materials.

     

    • FullText(HTML)
  • loading
    • References(63)
  • [1]
    郭凤仪,陈忠华.电接触理论及其应用技术[M].北京:中国电力出版社,2008.
    [2]
    MilenkoBraunovic,ValeryV.Konchits,NikolaiK.Myshkin.电接接触理论、应用与技术[M].北京:机械工业出版社,2010.
    [3]
    SLADE P G.Electrical Contacts[M].Boca Raton:CRC Press,2017.
    [4]
    张永振,杨正海,上官宝.载流摩擦的研究现状与挑战[J].自然杂志,2014,36(4):256-263.
    [5]
    孙高昂,杨正海,倪锋,等.弹性接触摩擦副的载流摩擦行为[J].润滑与密封,2021,46(8):49-53.
    [6]
    牛一旭,上官宝,张永振,等.铜/铬青铜摩擦副磨损表面形貌与电弧的相互作用关系[J].润滑与密封,2017,42(9):57-60.
    [7]
    王一帆,上官宝,张永振,等.紫铜/铬青铜摩擦磨损过程中电弧特性[J].河南科技大学学报(自然科学版),2015,36(4):5-8.
    [8]
    谢博华,鞠鹏飞,吉利,等.电接触材料摩擦学研究进展[J].摩擦学学报,2019,39(5):656-668.
    [9]
    张婧琳.Cu/QCr0.5载流条件下摩擦磨损性能的研究[D].洛阳:河南科技大学,2010.
    [10]
    张晓娟,孙乐民,赵彦文,等.电流对铬青铜/紫铜摩擦学特性的影响[J].润滑与密封,2007,32(4):91-93.
    [11]
    LIU P,BAHADUR S,VERHOEVEN J D.Electrical sliding friction and wear behavior of Cu-Nb in situ composites[J].IEEE Transactions on Components,Packaging,and Manufacturing Technology:Part A,1994,17(4):616-624.
    [12]
    ZHOU K C,XIAO J K,ZHANG L,et al.Tribological behavior of brass fiber brush against copper,brass,coin-silver and steel[J].Wear,2015,326-327:48-57.
    [13]
    XIAO J K,LIU L M,ZHANG C,et al.Sliding electrical contact behavior of brass fiber brush against coin-silver and Au plating[J].Wear,2016,368-369:461-469.
    [14]
    KANG X,XIE X L,ZHANG L.Tribological behavior and self-lubricating mechanism of Ag-C fiber brushes under air and vacuum conditions[J].Wear,2020,460-461:203458.
    [15]
    LUO B,LIU C S,LIU X L,et al.Effect of expanded graphite on the tribological behavior of tin-bronze fiber brushes sliding against brass[J].Tribology Transactions,2020,63(1):1-8.
    [16]
    KUHLMANN-WILSDORF D,ALLEY D.Commutation with metal fiber brushes[C]//Electrical Contacts,1988.,Proceedings of the Thirty Fourth Meeting of the IEEE Holm Conference on Electrical Contacts.San Francisco,CA,USA.IEEE,1988:239-246.
    [17]
    KUHLMANN-WILSDORF D.Electrical fiber brushes-theory and observations[C]//Electrical Contacts - 1995.Proceedings of the Forty-First IEEE Holm Conference on Electrical Contacts.Montreal,QC,Canada.IEEE,1995:295-314.
    [18]
    KUHLMANN-WILSDORF D.What role for contact spots and dislocations in friction and wear [J].Wear,1996,200(1-2):8-29.
    [19]
    KUHLMANN-WILSDORF D,ALLEY D M.Commutation with metal fiber brushes[J].IEEE Transactions on Components,Hybrids,and Manufacturing Technology,1989,12(2):246-253.
    [20]
    BOYER L,CHABRERIE J P,SAINT-MICHEL J.Low wear metallic fibre brushes[J].Wear,1982,78(1-2):59-68.
    [21]
    BOYER L,MONTES H,MARTIN J M.The role of solid contaminants in the electrical behaviour of metal fibre brushes[J].Wear,1985,104(2):173-179.
    [22]
    BROWN L,KUHLMANN-WILSDORF D,JESSER W.A study of metal fiber brush operation on slip rings and commutators[C]//Electrical Contacts - 2006.Proceedings of the 52nd IEEE Holm Conference on Electrical Contacts.Montreal,QC,Canada.IEEE,2006:232-237.
    [23]
    ARGIBAY N,BARES J A,KEITH J H,et al.Copper-beryllium metal fiber brushes in high current density sliding electrical contacts[J].Wear,2010,268(11-12):1230-1236.
    [24]
    ARGIBAY N,BARES J A,SAWYER W G.Asymmetric wear behavior of self-mated copper fiber brush and slip-ring sliding electrical contacts in a humid carbon dioxide environment[J].Wear,2010,268(3-4):455-463.
    [25]
    付文明.电流对滑板/接触线载流滑动摩擦磨损性能影响的研究[D].成都:西南交通大学,2017.
    [26]
    顾志平.直流电机用碳纤维电刷的研发及应用[J].炭素,2017(2):22-25.
    [27]
    SONG H,JI L,LI H X,et al.Self-forming oriented layer slip and macroscale super-low friction of graphene[J].Applied Physics Letters,2017,110(7):073101.
    [28]
    胡道春,孙乐民,上官宝,等.电弧能量对浸金属碳滑板材料载流摩擦磨损性能的影响[J].摩擦学学报,2009,29(1):36-42.
    [29]
    丁涛,卜俊,陈光雄,等.纯碳、浸金属碳与接触线载流摩擦磨损性能对比研究[J].润滑与密封,2009,34(9):16-19.
    [30]
    周文艳,彭可,冉丽萍,等.电流对Mo2C改性C/C-Cu复合材料载流摩擦磨损性能的影响[J].摩擦学学报,2016,36(4):503-509.
    [31]
    牛晓彬,张永振,上官宝,等.载流条件下电弧对C/C复合材料摩擦磨损性能的影响[J].河南科技大学学报(自然科学版),2016,37(3):1-5.
    [32]
    李韶林,国秀花,宋克兴,等.载流摩擦用铜基复合材料的研究现状及展望[J].材料热处理学报,2021,42(4):1-16.
    [33]
    张胜利,国秀花,宋克兴,等.多粒径TiB2颗粒增强铜基复合材料的制备与载流摩擦磨损性能[J].复合材料学报,2019,36(10):2348-2356.
    [34]
    GRANDIN M,WIKLUND U.Influence of mechanical and electrical load on a copper/copper-graphite sliding electrical contact[J].Tribology International,2018,121:1-9.
    [35]
    GRANDIN M,WIKLUND U.Wear phenomena and tribofilm formation of copper/copper-graphite sliding electrical contact materials[J].Wear,2018,398-399:227-235.
    [36]
    李雪飞,上官宝,张永振.石墨/铜复合材料的载流摩擦磨损性能[J].机械工程材料,2013,37(4):54-57.
    [37]
    马行驰,何国求,何大海,等.铜石墨合金材料在载流条件下的摩擦磨损行为研究[J].摩擦学学报,2008,28(2):167-172.
    [38]
    闻小琴.铜表面石墨烯层的滑动电接触摩擦学特性与润滑机理[D].西安:西北大学,2019.
    [39]
    赵礼.二硫化钼—铜—镀铜石墨复合材料的组织与性能研究[D].合肥:合肥工业大学,2012.
    [40]
    吴渝英,洪骎,肖学明,等.新型碳-铜复合材料电刷动态性能研究[J].中小型电机,1999,26(5):51-52.
    [41]
    FURLAN K P,DE MELLO J D B,KLEIN A N.Self-lubricating composites containing MoS2:a review[J].Tribology International,2018,120:280-298.
    [42]
    丁涛,魏绍鹏,杨义,等.不锈钢与地铁集电靴用浸金属碳材料的摩擦磨损性能研究[J].粉末冶金技术,2019,37(4):243-247.
    [43]
    李庶.银基复合电接触材料滑动电摩擦磨损性能研究[D].合肥:合肥工业大学,2009.
    [44]
    李庶,凤仪,杨茜婷,等.Ag-MoS2复合材料电磨损表面膜结构和形成机理研究(英文)[J].稀有金属材料与工程,2009,38(11):1881-1885.
    [45]
    李庶,凤仪,杨茜婷,等.银-二硫化钼复合材料滑动电磨损机理的研究[J].功能材料,2009,40(4):598-601.
    [46]
    钱刚.铜基自润滑复合材料的电磨损及电弧烧蚀性能研究[D].合肥:合肥工业大学,2015.
    [47]
    黄仕银.电流密度对铜基自润滑材料电摩擦性能的影响[J].兵器材料科学与工程,2020,43(2):77-80.
    [48]
    杨振伟.铜基自润滑表面耐磨厚涂层的制备及磨损机理研究[D].太原:太原理工大学,2019.
    [49]
    钱刚,凤仪,黄晓晨,等.铜基自润滑复合材料的电弧烧蚀性能[J].稀有金属材料与工程,2018,47(6):1818-1823.
    [50]
    范浩.激光合成TiB2-MoB2-SiC/Cu复合材料的性能研究[D].秦皇岛:燕山大学,2016.
    [51]
    金延文,曲彦平,王东,等.SiC与球形石墨颗粒混杂增强铝基复合材料的摩擦磨损性能研究[J].摩擦学学报,2021,41(3):334-343.
    [52]
    王召明,谢煌,李晓文,等.SiCP增强铝基复合材料组织及高温摩擦磨损性能的研究[J].热加工工艺,2021,50(16):56-61.
    [53]
    上官宝,孙乐民,张永振,等.SiCp增强Al基复合材料的载流摩擦磨损性能研究[C]//2006全国摩擦学学术会议论文集(一).哈尔滨,2006:43-45.
    [54]
    李鑫海.Ti3SiC2-SiC复合材料的制备及性能的研究[D].吉林:吉林化工学院,2021.
    [55]
    刘可心,王蕾,杨晨,等.Ti3SiC2/Cu复合材料的制备与摩擦磨损性能[J].复合材料学报,2020,37(11):2844-2852.
    [56]
    ABOU HAMAD V,SOUEIDAN M,HAMAD H,et al.Thermo-mechanical simulation of self-heating of a high-power diode made of Ti3SiC2 (MAX) phase-on-4H-SiC substrate[J].Journal of Thermal Science,2021,30(3):939-949.
    [57]
    LORENZ M,TRAVITZKY N,RAMBO C R.Effect of processing parameters on in situ screen printing-assisted synthesis and electrical properties of Ti3SiC2-based structures[J].Journal of Advanced Ceramics,2021,10(1):129-138.
    [58]
    刘君龙.Ti3SiC2基复合材料的制备及摩擦磨损性能的研究[D].秦皇岛:燕山大学,2019.
    [59]
    关勇.Ti3SiC2-TiC0.4-TiAl自润滑复合材料的制备及摩擦磨损性能研究[D].秦皇岛:燕山大学,2019.
    [60]
    肖琪聃,周峰,吴珊.无压熔渗制备TiC/ Ti3SiC2复合材料高速载流摩擦磨损性能[J].复合材料学报,2018,35(10):2832-2840.
    [61]
    范晓孟.Ti3SiC2改性C/SiC复合材料的性能研究[D].西安:西北工业大学,2015.
    [62]
    赵小根,何国求,张蕊,等.铜钛硅碳石墨合金材料摩擦磨损性能研究[J].功能材料,2012,43(8):980-983.
    [63]
    刘新.Ti3SiC2、Ti3SiC2陶瓷的非载流和载流摩擦学行为研究[D].北京:北京交通大学,2007.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views (48) PDF downloads(6) Cited by()
    Proportional views
    Related

    Copyright © 《Development and Application of Materials》豫ICP备13020589号-2

    Adress: No.169, Binhe South Road, Luolong District, Luoyang City, Henan Province，China  Tel: (0379)67256265;  (0379)67256345  Email: TG023@163.com

    Supported by: Beijing Renhe Information Technology Co., Ltd.    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return