Citation: | XU Lujie, CHEN Yuhu, ZHANG Ling, HUANG Ming, ZHAI Menglei, CHEN Wenguang. Simulation and Experimental Study on Injection Molding Vulcanization of Porous Rubber Products[J]. Development and Application of Materials, 2023, 38(6): 92-99,110. |
[1] |
柯其宁. 高透紫外氟硅橡胶的性能及其固化动力学研究[D]. 武汉:湖北工业大学, 2020.
|
[2] |
轩召民. 用等效硫化效应法测定摩托车外胎正硫化时间[J]. 中国橡胶, 2020, 36(8):48-53.
|
[3] |
刘兆栋, 刘志坡, 于磊. 大型厚壁橡胶圈硫化成型工艺与模具优化设计研究[J]. 世界橡胶工业, 2015, 42(9):33-37.
|
[4] |
樊文瑞, 李军霞, 张弘玉, 等. 输送带非等温硫化过程数值模拟与实验研究[J]. 煤炭工程, 2023, 55(1):112-117.
|
[5] |
LUBURA J, KOJIĆ P, PAVLIČ EVIĆ J, et al. A no-vel approach for simulation and optimization of rubber vulcanization[J]. Polymers, 2023, 15(7):1750.
|
[6] |
LIMRUNGRUENGRAT S, CHAIKITTIRATANA A, P-ORNPEERAKEAT S, et al. Thermo-mechanical finite element simulation and validation of rubber curing process[J]. Journal of Mechanical Science and Technology, 2022, 36(6):3039-3046.
|
[7] |
张韬杰, 施飞. 橡胶非等温硫化工艺的数值模拟[J]. 橡胶工业, 2016, 63(2):111-114.
|
[8] |
GHOREISHY M H R. A state-of-the-art review on the mathematical modeling and computer simulation of rubber vulcanization process[J]. Iranian Polymer Journal, 2016, 25(1):89-109.
|
[9] |
WU J A, SU B L, LIU Q A, et al. Research on vulcanization process simulation of butyl rubber based on a new characterization model of curing degree[J]. Progress in Rubber, Plastics and Recycling Technology, 2014, 30(4):237-247.
|
[10] |
ARRILLAGA A, ZALDUA A M, ATXURRA R M, et al. Techniques used for determining cure kinetics of rubber compounds[J]. European Polymer Journal, 2007, 43(11):4783-4799.
|
[11] |
GHOSH P, KATARE S, PATKAR P, et al. Sulfur vulcanization of natural rubber for benzothiazole accelerated formulations:from reaction mechanisms to a rational kinetic model[J]. Rubber Chemistry and Technology, 2003, 76(3):592-693.
|
[12] |
LEROY E, SOUID A, DETERRE R. A continuous kinetic model of rubber vulcanization predicting induction and reversion[J]. Polymer Testing, 2013, 32(3):575-582.
|
[13] |
KAMAL M R, SOUROUR S. Kinetics and thermal characterization of thermoset cure[J]. Polymer Engineering & Science, 1973, 13(1):59-64.
|
[14] |
KAMAL M R. Thermoset characterization for moldability analysis[J]. Polymer Engineering & Science, 1974, 14(3):231-239.
|
[15] |
ACOCELLA M, ESPOSITO CORCIONE C, GIURI A, et al. Catalytic activity of oxidized carbon black and graphene oxide for the crosslinking of epoxy resins[J]. Polymers, 2017, 9(12):133.
|
[16] |
HE L M, ZHOU J, DAI S L, et al. Influence of combustion modifiers on the cure kinetics of glycidyl azide polymer based propellant-evaluated through rheo-kinetic approach[J]. Polymers, 2019, 11(4):637.
|
[17] |
张梦飞, 张玲, 李晓闯, 等. 厚壁橡胶制品非等温硫化过程模拟与实验研究[J]. 化工学报, 2021, 72(4):2065-2075.
|
[18] |
王福军. 计算流体动力学分析:CFD软件原理与应用[M]. 北京:清华大学出版社, 2004.
|
[19] |
GLOWINSKI R, PIRONNEAU O. Finite element methods for navier-stokes equations[J]. Annual Review of Fluid Mechanics, 1992, 24:167-204.
|
[20] |
DENN M M. Extrusion instabilities and wall slip[J]. Annual Review of Fluid Mechanics, 2001, 33:265-287.
|
[21] |
Rippl A, Pittman J, Sienz J. Three-dimensional simulation of rubber profile extrusion with integration of rheological data[C]. Proceeding of Sixth ESAFORM, 2003.
|
[22] |
Rippl A, Pittman J, Sienz J. Three-dimensional simulation of rubber extrusion using finite element analysis. [C]. Proceedings of the Tenth ACME, 2002.
|
[23] |
ROSENBAUM E E, HATZIKIRIAKOS S G. Wall slip in the capillary flow of molten polymers subject to viscous heating[J]. AIChE Journal, 1997, 43(3):598-608.
|