Wang Xinping, Meng Xiangjun, Yu Wei, Liu Yinqi. The Influence of Flame Forming Parameters on the Microstructure and Properties of Titanium Plates[J]. Development and Application of Materials, 2001, 16(3): 10-12. DOI: 10.19515/j.cnki.1003-1545.2001.03.003
Citation: Wang Xinping, Meng Xiangjun, Yu Wei, Liu Yinqi. The Influence of Flame Forming Parameters on the Microstructure and Properties of Titanium Plates[J]. Development and Application of Materials, 2001, 16(3): 10-12. DOI: 10.19515/j.cnki.1003-1545.2001.03.003

The Influence of Flame Forming Parameters on the Microstructure and Properties of Titanium Plates

More Information
  • Received Date: January 01, 2001
  • Available Online: June 14, 2024
  • In this paper, the influence of heating temperature and heating times on the microstructure and properties of titanium alloy was investigated by testing and analyzing the microstructure and properties of titanium alloy plates which were heated with different heating parameters. The results manifest that the σb and σ0.2 of the alloy will increase and the δ5 will decrease with the increase of heating temperature,and the σb of the alloy will increase and the σ0.2 and δ5 will decrease with the increase of heat times of the flame forming. The reduction is due to the appearance of the brittle layer and the growth of the coarse grains.
  • Related Articles

    [1]WU Xiaofei, DUAN Mengqiang, WU Yukun, WANG Qi, JIANG Peng. Effect of Heat Treatment on Microstructure and Mechanical Properties of Ti5211 Plates[J]. Development and Application of Materials, 2020, 35(4): 11-13,23.
    [2]HUANG Wei, WANG Shaogang, LI Lize, JIN Yang. Laser Beam Welding of Titanium Alloy and Microstructure and Mechanical Properties of Welded Joint[J]. Development and Application of Materials, 2019, 34(2): 20-27. DOI: 10.19515/j.cnki.1003-1545.2019.02.004
    [3]HAO Xiaobo, ZHANG Qiang, LI Bobo, LIU Yinqi, LI Yang. Effect of High Temperature Annealing in α + β Phase Region on Microstructure and Mechanical Properties of Ti80 Alloy Plates[J]. Development and Application of Materials, 2018, 33(1): 49-53. DOI: 10.19515/j.cnki.1003-1545.2018.01.008
    [4]WANG Xinghua, WU Yanming, MENG Wei, ZHANG Chengjie. Microstructure and Mechanical Properties of Laser Forming Repair 10Cr5NiMoV Steel with Inconel 625 Powder[J]. Development and Application of Materials, 2016, 31(5): 31-35. DOI: 10.19515/j.cnki.1003-1545.2016.05.007
    [5]LUO Li-yang, CHEN Shuai-chao, WANG Xin-peng, NING Tian-xin, ZHANG Chun-lin. Microstructure and Properties of Alloy 625 Cold Rolled Sheet[J]. Development and Application of Materials, 2015, 30(4): 30-35,42. DOI: 10.19515/j.cnki.1003-1545.2015.04.007
    [6]ZHANG Jie-pin, MIN Xin-hua. Effects of Elements N,O and Fe on Microstructure and Property of TA15 Titanium Alloy[J]. Development and Application of Materials, 2013, 28(2): 83-86. DOI: 10.19515/j.cnki.1003-1545.2013.02.019
    [7]LIU Gang, LIU Wei, YANG Jing-hong. Technology and Microstructure of Flame Distortion Correction and Line Neat Forming for New Type 440 MPa Ship Building Steel[J]. Development and Application of Materials, 2012, 27(5): 17-19. DOI: 10.19515/j.cnki.1003-1545.2012.05.005
    [8]LU Xiao-sheng, LIU Hong. Effects of Flame Process on Mechanical Properties and Microstructure of Continuous Casting 10MnNiCrMoV Plate[J]. Development and Application of Materials, 2006, 21(3): 18-22. DOI: 10.19515/j.cnki.1003-1545.2006.03.007
    [9]LIU Rui-min, LI Xing-wu, SHA Ai-xue. The Study of the Microstructure and Properties of TA15 Titanium Alloy Plate[J]. Development and Application of Materials, 2005, 20(4): 23-26. DOI: 10.19515/j.cnki.1003-1545.2005.04.007
    [10]Meng Xiangjun, Liu Yinqi. Flame Forming Technological Property of Titanium Alloy Plate[J]. Development and Application of Materials, 2003, 18(5): 21-24. DOI: 10.19515/j.cnki.1003-1545.2003.05.006

Catalog

    Article Metrics

    Article views (18) PDF downloads (0) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return