Citation: | WANG Chun-fen, LI Xue-feng. Failure Analysis of A Gasification Boiler[J]. Development and Application of Materials, 2007, 22(6): 54-56. DOI: 10.19515/j.cnki.1003-1545.2007.06.014 |
[1] | WANG Houqin, GAN Shuhe, WANG Yifan, SONG Qingjun, ZHANG Binggang. Study on Microstructures and Mechanical Properties of 60 mm Thick TC4 ELI Titanium Alloy Welded Joints by Electron Beam Welding[J]. Development and Application of Materials, 2024, 39(6): 35-43,52. |
[2] | WANG Jisheng. Effect of Rare Earth Element Y on Mechanical Properties of TC4 Titanium Alloy[J]. Development and Application of Materials, 2023, 38(1): 42-47. |
[3] | LI Longteng, WANG Yang, LIU Xibo, YANG Xuedong. High Temperature Creep Properties and Microstructure of Ti-Al-Zr-Mo-Nb-Sn-Si Cast Titanium Alloy[J]. Development and Application of Materials, 2021, 36(4): 9-13. |
[4] | XU Lingyu, WANG Yang, WANG Qi, JIANG Peng, LIAO Zhiqian. Study on Compressive Creep Behavior at Room Temperature and Dislocation Type of Ti-6Al-3Nb-2Zr-1Mo Alloy[J]. Development and Application of Materials, 2021, 36(1): 17-23. |
[5] | WANG Xiaolian, WANG Qingyun, WANG Yabin. Developing of Flux of Stainless Steel Containing Nb or Ti for Wire Electrode Submerged Arc Welding[J]. Development and Application of Materials, 2019, 34(6): 70-73. DOI: 10.19515/j.cnki.1003-1545.2019.06.014 |
[6] | LIU Xilin, XU Jialei, WANG Ying, GENG Yongliang, WANG Gang. Structure and Mechanical properties of Welded Joint of 33 mm-thick TC4 Titanium Alloy by Electron Beam Welding Technique[J]. Development and Application of Materials, 2016, 31(5): 49-52. DOI: 10.19515/j.cnki.1003-1545.2016.05.012 |
[7] | SUN Shao-hua, GUO Ning, SUN Peng-peng, ZHANG Yun-hao. The Vacuum Isothermal Forming of TC4 Alloy Thin Shell[J]. Development and Application of Materials, 2015, 30(6): 38-41. DOI: 10.19515/j.cnki.1003-1545.2015.06.008 |
[8] | WANG Mei-jiao, MENG Xiang-jun, LIAO Zhi-qian. The Effect of Heat Treatment on Structure and Properties of Titanium Alloy Ti-10V-2Fe-3Al[J]. Development and Application of Materials, 2012, 27(5): 28-32. DOI: 10.19515/j.cnki.1003-1545.2012.05.008 |
[9] | XIONG Yi-long, SHEN Jun, DU Yu-jun, FENG Zhou-rong. Effect of Drawing Velocity on the Structure of Directionally Solidified Ti-48Al-8Nb Alloy[J]. Development and Application of Materials, 2012, 27(5): 23-27. DOI: 10.19515/j.cnki.1003-1545.2012.05.007 |
[10] | QU Yin-hua, SUN Jian-ke, MENG Xiang-jun. An lnvestigation on Mechanic Behavior of TC4 Alloy During Hot Compression Deformation[J]. Development and Application of Materials, 2006, 21(2): 24-29. DOI: 10.19515/j.cnki.1003-1545.2006.02.006 |