LI Jing-yong, WANG Hu, LIU Zhi-peng, LU Ya-ming. Numerical Simulation of Welding Residual Stresses and Distortions of Aluminum Alloy Cylinder under Pre-tension Stresses[J]. Development and Application of Materials, 2008, 23(5): 52-55. DOI: 10.19515/j.cnki.1003-1545.2008.05.012
Citation: LI Jing-yong, WANG Hu, LIU Zhi-peng, LU Ya-ming. Numerical Simulation of Welding Residual Stresses and Distortions of Aluminum Alloy Cylinder under Pre-tension Stresses[J]. Development and Application of Materials, 2008, 23(5): 52-55. DOI: 10.19515/j.cnki.1003-1545.2008.05.012

Numerical Simulation of Welding Residual Stresses and Distortions of Aluminum Alloy Cylinder under Pre-tension Stresses

More Information
  • Received Date: October 28, 2007
  • Available Online: March 29, 2024
  • The welding stress and distortion,which appeared during the butt welding of girth joint of aluminum alloy cylinder under and without pre-tension stress,are numerically simulated by using ANSYS finite element analysis software.The calculation results show that pre-tension welding can reduce the welding residual stresses and deformations effectively.When the pre-tension stress =90%Rp0.2,the residual stress at weld is about 52% lower than that without pre-tension.Meanwhile,the welding deformations of aluminum alloy barrel are reduced greatly under pre-tension.
  • Related Articles

    [1]DING Penglong, CHEN Lei, HE Liang, YU Jun. Experimental Measurement and Numerical Simulation of Residual Stress on Butt Welding Steel Plates[J]. Development and Application of Materials, 2023, 38(2): 16-22.
    [2]ZHOU Tiezhu, YU Yan, ZHENG Congfang, YUAN Wei, FU Liguo, ZHAO Guochao. Numerical Simulation of Inner Flow of B10 Copper Alloy Elbow Based on FLUENT[J]. Development and Application of Materials, 2022, 37(3): 61-68.
    [3]WANG Donghui, CHEN Zhenhua, WANG Shaogang. Numerical Simulation and Process Optimization on Electron Beam Welding of Al-Li Alloy[J]. Development and Application of Materials, 2020, 35(1): 58-67.
    [4]SHAO Fei, WU Chunxue, ZHANG Yongfeng, DENG Chunfeng. Numerical Simulation Research on the Spining Force of Neck-spining Formation of the Bottle Pressure Vessel[J]. Development and Application of Materials, 2019, 34(5): 35-39. DOI: 10.19515/j.cnki.1003-1545.2019.05.008
    [5]ZONG Feng, HUO Guangrui, WU Songlin. Analysis on Numerical Simulation for the Twin-Wire SAW Welding Temperature Field[J]. Development and Application of Materials, 2016, 31(4): 51-56. DOI: 10.19515/j.cnki.1003-1545.2016.04.010
    [6]YANG Shu. Research on Heat Source Model and Numerical Simulation of High Frequency Induction Heating Forming[J]. Development and Application of Materials, 2015, 30(4): 20-23. DOI: 10.19515/j.cnki.1003-1545.2015.04.005
    [7]WAN Songlin, WU Songlin. Numerical Simulation Analysis for the Welding Residual Stress of Low Strength Match Butt Joints[J]. Development and Application of Materials, 2015, 30(1): 33-37. DOI: 10.19515/j.cnki.1003-1545.2015.01.007
    [8]SHAO Fei, REN Fang-jie, CHANG Lei, ZHANG Yong-feng. Numerical Simulation Research on the Process of Hot Neck-spining Formation for the Seamless Cylinder[J]. Development and Application of Materials, 2013, 28(3): 102-106. DOI: 10.19515/j.cnki.1003-1545.2013.03.023
    [9]WU Song-lin, LI De-qiang, SHAO Fei, DENG Chun-feng. Numerical Simulation Research on the Process of Multi-path Hot Neck-spinning Formation for the Cylinder[J]. Development and Application of Materials, 2012, 27(4): 7-12. DOI: 10.19515/j.cnki.1003-1545.2012.04.003
    [10]XI Yu-lin, WU Chuang, LIU Guo-yuan, ZHANG Xin-jie. Numerical Simulation Analysis on Micro-mechanical Characteristics of Titanium Particle Reinfored Magnesium Matrix Composites[J]. Development and Application of Materials, 2012, 27(2): 28-31. DOI: 10.19515/j.cnki.1003-1545.2012.02.007

Catalog

    Article Metrics

    Article views (26) PDF downloads (1) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return