ZHU Danyang, ZHENG Yun, ZHAI Linlin, QI Bolan, MA Hongjian. Erosion Wear Behavior of Ti2AlNb Alloy by Surface Plasmas Carburized[J]. Development and Application of Materials, 2016, 31(4): 82-87. DOI: 10.19515/j.cnki.1003-1545.2016.04.015
Citation: ZHU Danyang, ZHENG Yun, ZHAI Linlin, QI Bolan, MA Hongjian. Erosion Wear Behavior of Ti2AlNb Alloy by Surface Plasmas Carburized[J]. Development and Application of Materials, 2016, 31(4): 82-87. DOI: 10.19515/j.cnki.1003-1545.2016.04.015

Erosion Wear Behavior of Ti2AlNb Alloy by Surface Plasmas Carburized

More Information
  • Received Date: January 13, 2016
  • Available Online: March 29, 2024
  • The carburized layer was engineered onto Ti2AlNb orthorhombic alloy by a double glow discharge plasma technique.The microstructure,elements distribution and phase composition of the carburized layer were characterized by scanning electron microscope(SEM),X-ray diffraction(XRD) and energy dispersive spectrometer(EDS).The micro hardness of the carburized layer and the substrate were measured,and erosion resistance tests were carried out to test their erosion wear resistances.The results indicated that a carburized layer,about 30 μm-thick,is formed by double glow plasma carburizing.The micro hardness of the layer is 979 HV0.1 and the substrate is 393 HV0.1.The erosion wear resistance of Ti2AlNb alloy carburized is significantly improved.
  • Related Articles

    [1]WANG Ying, YANG Shengli, LIU Xiaoyong. Study on Tensile Stress Corrosion Behavior of Titanium Alloy at Slow Strain Rate[J]. Development and Application of Materials, 2022, 37(4): 15-20.
    [2]SUN Jihong, MAO Liuwei, ZHAO Mingyu, SONG Qingyuan, DU Du. Effects of Hydrostatic Pressure and Cathodic Polarization on Stress Corrosion of Titanium Alloy in Seawater[J]. Development and Application of Materials, 2022, 37(1): 12-16,20.
    [3]TENG Kui, LUO Xianfu, LI Hongping, CHA Xiaoqin. Study on Stress Corrosion Cracking Behavior of T Profiles of 7055 Aluminum Alloy[J]. Development and Application of Materials, 2021, 36(4): 44-50.
    [4]CHENG Yingjin, LIU Haitao, DU Yi, YANG Shu, ZHENG Wenjian, DAI Xuejia. Analysis of 10Ni8CrMoV Steel Welding Cold Cracking Susceptibility on the Basis of Implant Test[J]. Development and Application of Materials, 2016, 31(5): 13-18. DOI: 10.19515/j.cnki.1003-1545.2016.05.004
    [5]LUO Xian-fu, CHA Xiao-qin, ZHENG Guo-hua, ZHANG Li-juan, ZHAO Yang. Effects of Aging Process on the Slow Strain Tensile Properties of 2000 Series High Strength Aluminum Alloy[J]. Development and Application of Materials, 2015, 30(4): 24-29. DOI: 10.19515/j.cnki.1003-1545.2015.04.006
    [6]XU Kuilong, ZHANG Xianfeng. Effect of Dynamic Strain Aging on the Strength of 5083 Al-based Alloy[J]. Development and Application of Materials, 2015, 30(1): 54-57. DOI: 10.19515/j.cnki.1003-1545.2015.01.011
    [7]ZHANG Haifeng, LI Xuefeng, ZHANG Yonghui. Failure Analysis of Cracking of Nut[J]. Development and Application of Materials, 2013, 28(1): 72-75. DOI: 10.19515/j.cnki.1003-1545.2013.01.016
    [8]WU Chun-xue, SHAO Fei, ZHANG Yong-feng, REN Fang-jie. Research on Stress Corrosion Resistance and Critical Crack Size of 38CrNi3MoVA Steel[J]. Development and Application of Materials, 2012, 27(4): 1-3. DOI: 10.19515/j.cnki.1003-1545.2012.04.001
    [9]WANG Xiao-hua, XIN Bao, SA Shi-yong, WU Lun-fa. Experimental Investigation on Cold Crack Sensibility of 321-Q370q Clad Plates[J]. Development and Application of Materials, 2008, 23(6): 54-57. DOI: 10.19515/j.cnki.1003-1545.2008.06.015
    [10]HUANG Yan-liang, Brian Kinsella, Thomas Becker, HUANG Si-di, ZHANG Yang-yang. Identification of Sensitization of Austenitic Stainless Steel to Intergranular Stress Corrosion Cracking by Atomic Force Microscopy[J]. Development and Application of Materials, 2008, 23(3): 7-11. DOI: 10.19515/j.cnki.1003-1545.2008.03.002

Catalog

    Article Metrics

    Article views (39) PDF downloads (1) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return