ZHANG Yajun, ZHANG Xinyao, ZHANG Yunhao. Analysis on Application of Different Models for Fatigue Crack Propagation Rate of Metallic Materials[J]. Development and Application of Materials, 2021, 36(2): 88-92.
Citation: ZHANG Yajun, ZHANG Xinyao, ZHANG Yunhao. Analysis on Application of Different Models for Fatigue Crack Propagation Rate of Metallic Materials[J]. Development and Application of Materials, 2021, 36(2): 88-92.

Analysis on Application of Different Models for Fatigue Crack Propagation Rate of Metallic Materials

More Information
  • Received Date: May 20, 2020
  • Fatigue crack propagation rate of metallic materials is an important index of mechanical property, which is employed for assessment of safe service and prediction of fatigue life for metallic materials and their corresponding components with cracks in them. In this paper, based on different stages of fatigue crack propagation of metallic materials, closure effect, influence of stress ratio on fatigue crack propagation and so on, characteristics of different models for fatigue crack propagation rate were compared and analyzed, which would provide reference for selecting appropriate models in safety design and life prediction.
  • [1]
    庄力健,高增梁,王效贵,等.16MnR钢在不同应力比下的疲劳裂纹扩展的试验研究及模拟[J].压力容器,2007,24(3):1-7.
    [2]
    熊缨,陈冰冰,郑三龙,等.16MnR钢在不同条件下的疲劳裂纹扩展规律[J].金属学报,2009,45(7):849-855.
    [3]
    颜鸣皋.金属疲劳裂纹初期扩展的特征及其影响因素[J].航空材料,1982,2(2):60-74.
    [4]
    PARIS P,Erdogan F.A critical analysis of crack propagation laws[J].J.bas.Engng,1963,85(3):528-534.
    [5]
    LINDLEY T C,PALMER I G,RICHARDS C E.Acoustic emission monitoring of fatigue crack growth[J].Materials Science and Engineering,1978,32(1):1-15.
    [6]
    马利军.断裂力学的含缺陷车轴服役寿命评估方法研究[D].北京:北京交通大学,2016.
    [7]
    许飞,周善林,石科学.应力比对TC4-DT钛合金疲劳裂纹扩展速率的影响[J].材料热处理技术,2010,39(20):33-35.
    [8]
    刘义伦,何军,刘驰,等.2524铝合金不同应力比下的疲劳裂纹扩展行为[J].锻压技术,2018,43(6):134-141.
    [9]
    贾心怡,马廷霞,刘维洋,等.波动载荷下X80管道轴向表面裂纹扩展研究[J].塑性工程学报,2018,25(4):262-268.
    [10]
    金峤,孙泽宇,孙威.内压波动下的CO2管道轴向表面裂纹疲劳扩展研究[J].工程力学,2015,32(5):84-93.
    [11]
    ELBER W.The significance of fatigue crack closure[J].ASTM STP,1970:486.
    [12]
    宋欣.不用应力比下的疲劳裂纹扩展可靠性研究[D].哈尔滨:哈尔滨理工大学,2009.
    [13]
    FORMAN R G.Study of fatigue crack initiation from flaws using fracture mechanics theory[J].Engineering Fracture Mechanics,1972,4(2):333-345.
    [14]
    PEARSON S.The effect of mean stress on fatigue crack propagation in half-inch (12.7mm) thick specimens of aluminum alloys of high and low fracture toughness[J].Engineering Fracture Mechanics,1972,4(1):9-24.
    [15]
    YAHIAOUI B,Petrequi P.Propagation of fatigue cracks in low-C austenitic stainless steels types304L and 316L.Rev.Phys.Appl.,1974,9:683-690.
    [16]
    石德珂,金志浩.材料的力学性能[M].西安:西安交通大学出版社,2005:125-131.
    [17]
    殷之平.结构疲劳与断裂[M].西安:西北工业大学出版社,2012:82-83.
    [18]
    江有为.某GH4169动力涡轮盘裂纹扩展研究[D].杭州:浙江大学,2016.
  • Related Articles

    [1]LEI Zhufang, SUN Jianjun, HE Gang, ZHANG Yajun, WANG Pengyun. Research on Welding Technology for Heterogeneous Material of High Damping Mangnese-Corpper Alloy/40CrNiMoA[J]. Development and Application of Materials, 2019, 34(4): 56-64. DOI: 10.19515/j.cnki.1003-1545.2019.04.011
    [2]FENG Yi-chen, YAN Hong-xia, JIA Yuan. The Application Nanofluids in the Field of Friction[J]. Development and Application of Materials, 2012, 27(6): 87-91. DOI: 10.19515/j.cnki.1003-1545.2012.06.020
    [3]WANG Qiang, LIU Ying. Investigtion of Thermal Spraying Technology for Friction and Wear[J]. Development and Application of Materials, 2009, 24(4): 75-78,84. DOI: 10.19515/j.cnki.1003-1545.2009.04.018
    [4]XU Yu-song, CHEN Ju-fei, LI Xue-hao, XIE Yong-hu. Ultrasonic Attenuation Mechanism of Titanium Bronze[J]. Development and Application of Materials, 2009, 24(2): 17-20. DOI: 10.19515/j.cnki.1003-1545.2009.02.005
    [5]ZHANG Wen-qin, LEI Zhu-fang. Development of a High Damping Copper Alloy Plate Using in Ships[J]. Development and Application of Materials, 2009, 24(2): 7-12. DOI: 10.19515/j.cnki.1003-1545.2009.02.003
    [6]YUE Can-fu, WANG Yong-chao, GUO Hai-xia, LEI Zhu-fang, CHEN Hui-dong. Al2O3 Dispersion Strengthened Copper Alloy Produced through Internal Oxidation and its Microstructure and Property[J]. Development and Application of Materials, 2007, 22(4): 7-10. DOI: 10.19515/j.cnki.1003-1545.2007.04.003
    [7]XIA Cheng-dong, TIAN Bao-hong, LIU Ping, REN Feng-zhang, SONG Ke-xing, LIU Yong, JIA Shu-guo. Study on Densification and Internal Oxidation of Cu-Al Alloy Powders during Sintering Process[J]. Development and Application of Materials, 2007, 22(2): 48-51. DOI: 10.19515/j.cnki.1003-1545.2007.02.013
    [8]LI Jing-long, YU Rui-bo, WANG Zhong-ping, ZHANG Li-jun, ZHOU Zheng-hang. Influence of Friction Speed on Structure and Properties of Friction Welded Dissimilar Metal Joints[J]. Development and Application of Materials, 2005, 20(4): 5-8. DOI: 10.19515/j.cnki.1003-1545.2005.04.002
    [9]REN Run-tao, XU Chu-qi, JIN Xiao-hong, YE Zhang-ji. Influence of Sound Dissipation Fillers on Sound Performance of Acoustic Damping Coat[J]. Development and Application of Materials, 2005, 20(3): 1-4. DOI: 10.19515/j.cnki.1003-1545.2005.03.001
    [10]Ke Yuehu, Ge Huacai, Yuan Gaoqing, Yang Zhuoru. Application of Ag Additives in Lowering Internal Pressure of MH/Ni Battery[J]. Development and Application of Materials, 2002, 17(5): 13-16. DOI: 10.19515/j.cnki.1003-1545.2002.05.005

Catalog

    Article Metrics

    Article views (167) PDF downloads (28) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return