Volume 39 Issue 5
Oct.  2024
Turn off MathJax
Article Contents
Abstract
References
Related Articles
SUN Guangda, LI Yuxuan, ZHANG Tianhao, ZHOU Li, YANG Shengli, GAO Fuyang, LÜ Yifan, QIAO Sheng, ZHU Tiecheng. Research Progress of Friction Stir Welding Technology in Marine Titanium Alloy[J]. Development and Application of Materials, 2024, 39(5): 17-30.
Citation: SUN Guangda, LI Yuxuan, ZHANG Tianhao, ZHOU Li, YANG Shengli, GAO Fuyang, LÜ Yifan, QIAO Sheng, ZHU Tiecheng. Research Progress of Friction Stir Welding Technology in Marine Titanium Alloy[J]. Development and Application of Materials, 2024, 39(5): 17-30.
shu

Research Progress of Friction Stir Welding Technology in Marine Titanium Alloy

  • 1. State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001, China;

  • 2. Shandong Provincial Key Laboratory of Special Welding Technology, Harbin Institute of Technology at Weihai, Weihai 264209, China;

  • 3. Luoyang Ship Material Research Institute, Luoyang 471023, China;

  • 4. Beijing Zintec Technology Co., Ltd., Beijing 100000, China

More Information
  • Received Date: March 10, 2023
  • Available Online: November 19, 2024
    Graphical Abstract
    • Abstract
  • Titanium alloys can prolong the service life of ship structures and equipment due to the high strength and excellent corrosion resistance, and are widely used in the field of shipbuilding engineering. The traditional fusion welding process can result in defects such as porosity and inclusions during the welding process of titanium alloys, which will reduce the mechanical property of the joint. As a solid phase joining technology, friction stir welding (FSW) not only avoids fusion welding defects but also offers advantages such as low residual stress, low deformation, and high strength. Therefore, it has great potential for application in marine titanium alloy connection. In this paper, the design of welding tool and welding process control of the FSW are reviewed, and the microstructure evolution and mechanical property of the FSW joints of the marine titanium alloy are reviewed. Strategies for controlling and improving the technical issues in friction stir welding for marine titanium alloy are proposed, so are the development directions of friction stir welding for marine titanium alloy.
    • FullText(HTML)
    • References (87)
  • [1]
    MIRONOV S, SATO Y S, KOKAWA H. Friction-stir welding and processing of Ti-6Al-4V titanium alloy: a review[J]. Journal of Materials Science & Techno-logy, 2018, 34(1): 58-72.
    [2]
    陈军, 王廷询, 周伟, 等. 国内外船用钛合金及其应用[J]. 钛工业进展, 2015, 32(6): 8-12.
    [3]
    DING L F, QIN B H, GE K K, et al. Microstructures and mechanical properties of thick Ti-6Al-3Nb-2Zr-1Mo joint by magnetron-controlled narrow gap TIG welding [J]. Metals and materlils international, 2023, 29(8): 2304-2315.
    [4]
    GAO F Y, SUN Z J, YANG S L, et al. Stress corrosion characteristics of electron beam welded titanium alloys joints in NaCl solution[J]. Materials Characterization, 2022, 192: 112126.
    [5]
    HEIDARZADEH A, MIRONOV S, KAIBYSHEV R, et al. Friction stir welding/processing of metals and alloys: a comprehensive review on microstructural evolution[J]. Progress in Materials Science, 2021, 117: 100752.
    [6]
    DING Z H, FAN Q, WANG L Q. A review on friction stir processing of titanium alloy: characterization, method, microstructure, properties[J]. Metallurgical and Materials Transactions B, 2019, 50(5): 2134-2162.
    [7]
    LI H, PENG L F, MENG B, et al. Energy field assisted metal forming: current status, challenges and prospects[J]. International Journal of Machine Tools and Manufacture, 2023, 192: 104075.
    [8]
    WANG J Y, SU J Q, MISHRA R S, et al. Tool wear mechanisms in friction stir welding of Ti-6Al-4V alloy[J]. Wear, 2014, 321: 25-32.
    [9]
    ZHANG Y N, CAO X, LAROSE S, et al. Review of tools for friction stir welding and processing[J]. Canadian Metallurgical Quarterly, 2012, 51(3): 250-261.
    [10]
    RAI R, DE A, BHADESHIA H H, et al. Review: friction stir welding tools[J]. Science and Technology of Welding and Joining, 2011, 16(4): 325-342.
    [11]
    BUFFA G, FRATINI L, MICARI F, et al. Proceedings of the 40th Annual North American Manufacturing Research Conference, June 4-8, 2012 [C]. Michigan: Society of Manufacturing Engineers, 2012.
    [12]
    FALL A, FESHARAKI M, KHODABANDEH A, et al. Tool wear characteristics and effect on microstructure in Ti-6Al-4V friction stir welded joints[J]. Metals, 2016, 6(11): 275.
    [13]
    NASRESFAHANI A R, SOLTANIPUR A R, FARMANESH K, et al. Effects of tool wear on friction stir welded joints of Ti-6Al-4V alloy[J]. Materials Science and Technology, 2017, 33(5): 583-591.
    [14]
    MASHININI P M, DINAHARAN I, DAVID RAJA SELVAM J, et al. Microstructure evolution and mechanical characterization of friction stir welded titanium alloy Ti–6Al–4V using lanthanated tungsten tool[J]. Materials Characterization, 2018, 139: 328-336.
    [15]
    MOHANTY P P. Wear of friction stir tools considering qualitative and quantitative aspects: a review[J]. International Journal of Ambient Energy, 2022, 43(1): 5535-5553.
    [16]
    AMIROV A, ELISEEV A, KOLUBAEV E, et al. Wear of ZhS6U nickel superalloy tool in friction stir processing on commercially pure titanium[J]. Metals, 2020, 10(6): 799.
    [17]
    AMIROV A I, ELISEEV A A, RUBTSOV V E, et al. Butt friction stir welding of commercially pure titanium by the tool from a heat-resistant nickel alloy[C]//AIP. Proceedings of the international conference on advanced materials with hierarchical structure for new technologies and reliable structures 2019. Tomsk: AIP Publishing, 2019.
    [18]
    AMIROV A, UTYAGANOVA V, BELOBORODOV V, et al. Formation features of a welding joint of alloy grade2 by the friction stir welding using temperature resistant tools[J]. Metal Working and Material Science, 2019, 21(3): 72-82.
    [19]
    ZHANG Y, SATO Y S, KOKAWA H, et al. Stir zone microstructure of commercial purity titanium friction stir welded using pcBN tool[J]. Materials Science and Engineering: A, 2008, 488(1-2): 25-30.
    [20]
    BAO J W, YANG S Y, YANG T. Microstructural evolution, tensile property and dynamic compressive property of FSWed Ti-6Al-4V alloy[J]. Rare Metals, 2020, 39(2): 169-175.
    [21]
    LIU Z L, YANG K, YUE Y M, et al. Friction stir lap welding Ti-6Al-4V alloy using a threaded pin by simulation and experimental investigation[J]. Transactions of the Indian Institute of Metals, 2018, 71(5): 1279-1286.
    [22]
    DU S S, LIU H J, JIANG M H, et al. The performance of a Co-based alloy tool in the friction stir welding of TA5 alloy[J]. Wear, 2022, 488-489: 204180.
    [23]
    ZHOU L, LIU H J, LIU Q W. Effect of rotation speed on microstructure and mechanical properties of Ti-6Al-4V friction stir welded joints[J]. Materials & Design (1980-2015), 2010, 31(5): 2631-2636.
    [24]
    NASRESFAHANI A R, SOLTANIPUR A R, FARMANESH K, et al. The effect of friction stir welding on corrosion behavior of Ti-6Al-4V[J]. Journal of Materials Engineering and Performance, 2017, 26(9): 4311-4318.
    [25]
    WU L H, WANG D, XIAO B L, et al. Tool wear and its effect on microstructure and properties of friction stir processed Ti-6Al-4V[J]. Materials Chemistry and Physics, 2014, 146(3): 512-522.
    [26]
    DU S S, LIU H J, JIANG M H, et al. Eliminating the cavity defect and improving mechanical properties of TA5 alloy joint by titanium alloy supporting friction stir welding[J]. Journal of Manufacturing Processes, 2021, 69: 215-222.
    [27]
    EDWARDS P, RAMULU M. Surface residual stresses in Ti-6Al-4V friction stir welds: pre- and post-thermal stress relief[J]. Journal of Materials Engineering and Performance, 2015, 24(9): 3263-3270.
    [28]
    LAMBRAKOS S G. Inverse thermal analysis of Ti-6Al-4V friction stir welds using numerical-analytical basis functions with pseudo-advection[J]. Journal of Materials Engineering and Performance, 2018, 27(6): 3153-3167.
    [29]
    EDWARDS P, RAMULU M. Peak temperatures during friction stir welding of Ti-6Al-4V[J]. Science and Technology of Welding and Joining, 2010, 15(6): 468-472.
    [30]
    HE X C, GU F S, BALL A. A review of numerical analysis of friction stir welding[J]. Progress in Materials Science, 2014, 65: 1-66.
    [31]
    EDWARDS P D, RAMULU M. Material flow during friction stir welding of Ti-6Al-4V[J]. Journal of Materials Processing Technology, 2015, 218: 107-115.
    [32]
    JI S, JIN Y, YUE Y, et al. The effect of tool geometry on material flow behavior of friction stir welding of titanium alloy[J]. Engineering Review, 2013, 33(2): 107-113.
    [33]
    DU S S, LIU H J, GAO Y S, et al. Achievement of defect-free and high-ductility TA5 alloy joint by dynamic supporting friction stir welding[J]. Journal of Materials Processing Technology, 2022, 306: 117635.
    [34]
    FALL A, JAHAZI M, KHDABANDEH A R, et al. Effect of process parameters on microstructure and mechanical properties of friction stir-welded Ti-6Al-4V joints[J]. The International Journal of Advanced Manufacturing Technology, 2017, 91(5): 2919-2931.
    [35]
    FUJII H, SUN Y F, KATO H, et al. Investigation of welding parameter dependent microstructure and mechanical properties in friction stir welded pure Ti joints[J]. Materials Science and Engineering: A, 2010, 527(15): 3386-3391.
    [36]
    EDWARDS P D, RAMULU M. Investigation of microstructure, surface and subsurface characteristics in titanium alloy friction stir welds of varied thicknesses[J]. Science and Technology of Welding and Joining, 2009, 14(5): 476-483.
    [37]
    EDWARDS P, RAMULU M. Effect of process conditions on superplastic forming behaviour in Ti-6Al-4V friction stir welds[J]. Science and Technology of Welding and Joining, 2009, 14(7): 669-680.
    [38]
    GANGWAR K, RAMULU M. Friction stir welding of titanium alloys: a review[J]. Materials & Design, 2018, 141: 230-255.
    [39]
    EDWARDS P, RAMULU M. Identification of process parameters for friction stir welding Ti-6Al-4V[J]. Journal of Engineering Materials and Technology, 2010, 132(3): 1.
    [40]
    MENG X C, HUANG Y X, CAO J, et al. Recent progress on control strategies for inherent issues in friction stir welding[J]. Progress in Materials Science, 2021, 115: 100706.
    [41]
    BRASSINGTON W D P, COLEGROVE P A. Alternative friction stir welding technology for titanium-6Al-4V propellant tanks within the space industry[J]. Science and Technology of Welding and Joining, 2017, 22(4): 300-318.
    [42]
    MIRONOV S, SATO Y S, KOKAWA H. Development of grain structure during friction stir welding of pure titanium[J]. Acta Materialia, 2009, 57(15): 4519-4528.
    [43]
    NIMER S, WOLK J, ZUPAN M. Local property characterization of friction stir welded Ti-5111: transverse orientation measurements[J]. Acta Materialia, 2013, 61(8): 3050-3059.
    [44]
    DAVIES P S, WYNNE B P, RAINFORTH W M, et al. Development of microstructure and crystallographic texture during stationary shoulder friction stir welding of Ti-6Al-4V[J]. Metallurgical and Materials Transactions A, 2011, 42(8): 2278-2289.
    [45]
    PILCHAK A L, TANG W, SAHINER H, et al. Microstructure evolution during friction stir welding of mill-annealed Ti-6Al-4V[J]. Metallurgical and Materials Transactions A, 2011, 42(3): 745-762.
    [46]
    FONDA R W, KNIPLING K E. Texture development in near-α Ti friction stir welds[J]. Acta Materialia, 2010, 58(19): 6452-6463.
    [47]
    KNIPLING K E, FONDA R W. Texture development in the stir zone of near-α titanium friction stir welds[J]. Scripta Materialia, 2009, 60(12): 1097-1100.
    [48]
    BUFFA G, FRATINI L, SCHNEIDER M, et al. Micro and macro mechanical characterization of friction stir welded Ti-6Al-4V lap joints through experiments and numerical simulation[J]. Journal of Materials Processing Technology, 2013, 213(12): 2312-2322.
    [49]
    PILCHAK A L, WILLIAMS J C. Microstructure and texture evolution during friction stir processing of fully lamellar Ti-6Al-4V[J]. Metallurgical and Materials Transactions A, 2011, 42(3): 773-794.
    [50]
    WU L H, HU X B, ZHANG X X, et al. Fabrication of high-quality Ti joint with ultrafine grains using submerged friction stirring technology and its microstructural evolution mechanism[J]. Acta Materialia, 2019, 166: 371-385.
    [51]
    YOON S, UEJI R, FUJII H. Effect of initial microstructure on Ti-6Al-4V joint by friction stir welding[J]. Materials & Design, 2015, 88: 1269-1276.
    [52]
    KNIPLING K E, FONDA R W. Microstructural evolution in Ti-5111 friction stir welds[J]. Metallurgical and Materials Transactions A, 2011, 42(8): 2312-2322.
    [53]
    WU L H, WANG D, XIAO B L, et al. Microstru-ctural evolution of the thermomechanically affected zone in a Ti-6Al-4V friction stir welded joint[J]. Scripta Materialia, 2014, 78-79: 17-20.
    [54]
    GAO F Y, GUO Y F, YU W, et al. Microstructure evolution of friction stir welding of Ti6321 titanium alloy based on the weld temperature below microstructure transformation temperature[J]. Materials Characterization, 2021, 177: 111121.
    [55]
    ZHANG Y, SATO Y S, KOKAWA H, et al. Microstructural characteristics and mechanical properties of Ti-6Al-4V friction stir welds[J]. Materials Science and Engineering: A, 2008, 485(1-2): 448-455.
    [56]
    ESMAILY M, NOOSHIN MORTAZAVI S, TODEHFALAH P, et al. Microstructural characterization and formation of α’ martensite phase in Ti-6Al-4V alloy butt joints produced by friction stir and gas tungsten arc welding processes[J]. Materials & Design, 2013, 47: 143-150.
    [57]
    XU Z W, LI Z W, LV Z, et al. Effect of tool rotating speed on microstructure and mechanical properties of friction stir lap welded Ti-6Al-4V alloy[J]. The International Journal of Advanced Manufacturing Technology, 2017, 90(9): 3793-3800.
    [58]
    KIM J D, MURUGAN S P, CHOI S W, et al. Twin boundary induced grain coarsening in friction stir welding of fine- and ultra-fine-grained commercially pure titanium base metals[J]. Metals, 2022, 12(8): 1361.
    [59]
    FRATINI L, MICARI F, BUFFA G, et al. A new fixture for FSW processes of titanium alloys[J]. CIRP Annals, 2010, 59(1): 271-274.
    [60]
    SONG J, LIU H Q, TAN K, et al. Inhomogeneity of microstructure in friction stir welded TC17 alloy joint and its effects on mechanical behavior[J]. Materials Science and Engineering: A, 2021, 822: 141694.
    [61]
    ATAPOUR M, PILCHAK A L, FRANKEL G S, et al. Corrosion behavior of friction stir-processed and gas tungsten arc-welded Ti-6Al-4V[J]. Metallurgical and Materials Transactions A, 2010, 41(9): 2318-2327.
    [62]
    XU X L, LIU Q Y, WANG J, et al. The heat treatment improving the mechanical and fatigue property of TA15 alloy joint by friction stir welding[J]. Materials Characterization, 2021, 180: 111399.
    [63]
    LIU H J, ZHOU L, LIU Q W. Microstructural characteristics and mechanical properties of friction stir welded joints of Ti-6Al-4V titanium alloy[J]. Materials & Design, 2010, 31(3): 1650-1655.
    [64]
    SU Y, LI W Y, LIU X C, et al. Evolution of microstructure, texture and mechanical properties of special friction stir welded T-joints for an α titanium alloy[J]. Materials Characterization, 2021, 177: 111152.
    [65]
    STEUWER A, HATTINGH D G, JAMES M N, et al. Residual stresses, microstructure and tensile properties in Ti-6Al-4V friction stir welds[J]. Science and Technology of Welding and Joining, 2012, 17(7): 525-533.
    [66]
    RAMULU M, EDWARDS P D, SANDERS D G, et al. Tensile properties of friction stir welded and friction stir welded-superplastically formed Ti-6Al-4V butt joints[J]. Materials & Design, 2010, 31(6): 3056-3061.
    [67]
    XIE F F, HUANG C P, DONG C L, et al. Characterization of friction stir welded joints in TA15 titanium alloy plates[J]. Applied Mechanics and Materials, 2011, 138-139: 852-857.
    [68]
    SHAO H, ZHAO Y Q, GE P, et al. Crack initiation and mechanical properties of TC21 titanium alloy with equiaxed microstructure[J]. Materials Science and Engineering: A, 2013, 586: 215-222.
    [69]
    HUANG C W, ZHAO Y Q, XIN S W, et al. Effect of microstructure on tensile properties of Ti-5Al-5Mo-5V-3Cr-1Zr alloy[J]. Journal of Alloys and Compounds, 2017, 693: 582-591.
    [70]
    ZHENG R X, LIU M W, ZHANG Z, et al. Towards strength-ductility synergy through hierarchical microstructure design in an austenitic stainless steel[J]. Scripta Materialia, 2019, 169: 76-81.
    [71]
    SU Y, LI W Y, SHEN J J, et al. Comparing the fatigue performance of Ti-4Al-0.005B titanium alloy T-joints, welded via different friction stir welding sequences[J]. Materials Science and Engineering: A, 2022, 859: 144227.
    [72]
    EDWARDS P, RAMULU M. Fracture toughness and fatigue crack growth in Ti-6Al-4V friction stir welds[J]. Fatigue & Fracture of Engineering Materials & Structures, 2015, 38(8): 970-982.
    [73]
    EDWARDS P, RAMULU M. Fatigue performance of friction stir welded titanium structural joints[J]. International Journal of Fatigue, 2015, 70: 171-177.
    [74]
    GAO F Y, GUO Y F, YANG S L, et al. Fatigue properties of friction stir welded joint of titanium alloy[J]. Materials Science and Engineering: A, 2020, 793: 139819.
    [75]
    NAKAI M, NIINOMI M, KOMINE K, et al. High-cycle fatigue properties of an easily hot-workable (alpha plus beta)-type titanium alloy butt joint prepared by friction stir welding below beta transus temperature [J]. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 2019:742.
    [76]
    SANDERS D G, RAMULU M, EDWARDS P D, et al. Effects on the surface texture, superplastic forming, and fatigue performance of titanium 6Al-4V friction stir welds[J]. Journal of Materials Engineering and Performance, 2010, 19(4): 503-509.
    [77]
    NASRESFAHANI A, SOLTANIPUR A R, FARM-ANESH K, et al. The effect of post-weld heat treatment on the corrosion behavior of different weld zones of titanium Ti-6Al-4V alloy by friction stir welding[J]. Journal of Materials Engineering and Performance, 2020, 29(10): 6784-6789.
    [78]
    SANDERS D, EDWARDS P, GRANT G, et al. Superplastically formed friction stir welded tailored aluminum and titanium blanks for aerospace applications[J]. Journal of Materials Engineering and Performance, 2010, 19(4): 515-520.
    [79]
    WU L H, XIAO B L, NI D R, et al. Achieving superior superplasticity from lamellar microstructure of a nugget in a friction-stir-welded Ti-6Al-4V joint[J]. Scripta Materialia, 2015, 98: 44-47.
    [80]
    SANDERS D G, RAMULU M, KLOCK-MCCOOK E J, et al. Characterization of superplastically formed friction stir weld in titanium 6Al-4V: preliminary results[J]. Journal of Materials Engineering and Performance, 2008, 17(2): 187-192.
    [81]
    WU L H, ZHANG H, ZENG X H, et al. Achieving superior low temperature and high strain rate superplasticity in submerged friction stir welded Ti-6AI-4V alloy[J]. Science China Materials, 2018, 61(3): 417-423.
    [82]
    ZHOU L, LIU H J. Effect of 0.3wt% hydrogen addi-tion on the friction stir welding characteristics of Ti-6Al-4V alloy and mechanism of hydrogen-induced effect[J]. International Journal of Hydrogen Energy, 2010, 35(16): 8733-8741.
    [83]
    JIANG X Q, WYNNE B P, MARTIN J. Variant selection in stationary shoulder friction stir welded Ti-6Al-4V alloy[J]. Journal of Materials Science & Techno-logy, 2018, 34(1): 198-208.
    [84]
    JIANG X, WYNNE B P, MARTIN J. Microstructure and texture evolution of stationary shoulder friction stir welded Ti6Al4V alloy[J]. Science and Technology of Welding and Joining, 2015, 20(7): 594-600.
    [85]
    MA Z W, WANG Y, JI S D, et al. Fatigue properties of Ti-6Al-4V alloy friction stir welding joint obtained under rapid cooling condition[J]. Journal of Manufacturing Processes, 2018, 36: 238-247.
    [86]
    HAN Y, CHEN S J, JIANG X Q, et al. Effect of microstructure, texture and deformation behavior on tensile properties of electrically assisted friction stir welded Ti-6Al-4V joints[J]. Materials Characterization, 2021, 176: 111141.
    [87]
    JI S D, LI Z W, ZHANG L G, et al. Eliminating the tearing defect in Ti-6Al-4V alloy joint by back heating assisted friction stir welding[J]. Materials Letters, 2017, 188: 21-24.
    • Related Articles

  • Related Articles

    [1]XU Yingchang, WANG Qian, YANG Jie, ZHOU Mu, HUANG Sensen, QI Min, MA Yingjie, LEI Jiafeng, LI Hongxiao. Effect of Welding Wire Composition and Post-Welding Heat Treatment on Microstructure and Hardness of New Type α+β Titanium Alloy Welded Joint[J]. Development and Application of Materials, 2024, 39(4): 18-27.
    [2]MAO Liang, MA Zhaowei, YUAN Bo, LEI Xiaowei, FU Zhanbo, DU Zhibo. Study on Laser Welding Technology of TA5 Titanium Alloy with Filler Wire[J]. Development and Application of Materials, 2022, 37(1): 66-71,76.
    [3]HUANG Wei, WANG Shaogang, LI Lize, JIN Yang. Laser Beam Welding of Titanium Alloy and Microstructure and Mechanical Properties of Welded Joint[J]. Development and Application of Materials, 2019, 34(2): 20-27. DOI: 10.19515/j.cnki.1003-1545.2019.02.004
    [4]GAO Rui, YIN Yayun, REN Guanpeng, LI Ruiwu. Microstructure Evolution of 2205DSS GTAW Welded Joint[J]. Development and Application of Materials, 2019, 34(1): 16-22. DOI: 10.19515/j.cnki.1003-1545.2019.01.004
    [5]ZHANG Daiguo, LIU Xiangqian. Research Progress in Friction Stir Welding of Copper and Copper Alloys[J]. Development and Application of Materials, 2018, 33(6): 135-144. DOI: 10.19515/j.cnki.1003-1545.2018.06.023
    [6]GAO Fuyang, GAO Qi, YU Yan, JIANG Peng, LIU Zhiying, GUO Yufan. Research on Microstructure of Magnesium Alloy by Friction Stir Welding[J]. Development and Application of Materials, 2017, 32(1): 67-72. DOI: 10.19515/j.cnki.1003-1545.2017.01.013
    [7]HAN Feng, GAO Fuyang, YU Yan, LIU Zhiying, GUO Yufan. Study on Microstructures and Properties of FSW Welded Joint of 5A01 Aluminium Alloy Plate[J]. Development and Application of Materials, 2016, 31(3): 61-64. DOI: 10.19515/j.cnki.1003-1545.2016.03.012
    [8]GAO Fu-yang, WU Hua-min, QIU Sheng-wen, YU Yan, YAN Yang-yang, GUO Yu-fan. Study on Microstructure and Properties of FSW Welded Joint of Aluminum Alloy[J]. Development and Application of Materials, 2015, 30(5): 25-30. DOI: 10.19515/j.cnki.1003-1545.2015.05.005
    [9]WANG Yue, FU Zi-lai, ZHANG Yan-yang. Corrosion Resistance Properties of Welded Joints of Aluminum Alloys Containing Trace Sc[J]. Development and Application of Materials, 2007, 22(3): 37-39,56. DOI: 10.19515/j.cnki.1003-1545.2007.03.010
    [10]LI Jing-long, YU Rui-bo, WANG Zhong-ping, ZHANG Li-jun, ZHOU Zheng-hang. Influence of Friction Speed on Structure and Properties of Friction Welded Dissimilar Metal Joints[J]. Development and Application of Materials, 2005, 20(4): 5-8. DOI: 10.19515/j.cnki.1003-1545.2005.04.002

  • Cited by

    Periodical cited type(2)

    1. 张明鑫，曾庆业. 环保型钕铁硼电镀剂的开发过程及应用探究. 天津化工. 2024(01): 109-112 .
    2. 张超，黄光伟，王亚娜，陆通，石银冬，郑立允. 钕铁硼粉体的表面改性技术及应用研究进展. 表面技术. 2024(24): 40-53 .

    Other cited types(0)

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (59) PDF downloads (22) Cited by(2)
    Related

    Copyright © 《Development and Application of Materials》豫ICP备13020589号-2

    Adress: No.169, Binhe South Road, Luolong District, Luoyang City, Henan Province，China  Tel: (0379)67256265;  (0379)67256345  Email: TG023@163.com

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return