Volume 37 Issue 3
Jun.  2022
Turn off MathJax
Article Contents
Abstract
References
Related Articles
SUN Jianjun, WANG Pengyun, XIE Shufeng, ZHANG Fanxing, WANG Zhenghong. Comparison of Properties and Microstructures between Al-Cu-Mg-Ag Alloy and ZL205A Alloy[J]. Development and Application of Materials, 2022, 37(3): 13-20.
Citation: SUN Jianjun, WANG Pengyun, XIE Shufeng, ZHANG Fanxing, WANG Zhenghong. Comparison of Properties and Microstructures between Al-Cu-Mg-Ag Alloy and ZL205A Alloy[J]. Development and Application of Materials, 2022, 37(3): 13-20.
shu

Comparison of Properties and Microstructures between Al-Cu-Mg-Ag Alloy and ZL205A Alloy

  • Luoyang Ship Material Research Institute, Luoyang 471023, China

More Information
  • Received Date: September 15, 2021
  • Available Online: September 05, 2022
    Graphical Abstract
    • Abstract
  • Al-Cu-Mg-Ag aluminum alloy and ZL205A aluminum alloy are prepared by semi continuous casting. The flow properties, tensile properties at room and high temperatures, tensile fracture morphologies, intergranular corrosion depths and microstructures of the two alloys are compared and analyzed. The results show that when the pouring temperatures are 720℃ and 740℃, the flow properties of Al-Cu-Mg-Ag aluminum alloy are better than those of ZL205A aluminum alloy. At room temperature, 150℃, 200℃ and 250℃, the strengths of Al-Cu-Mg-Ag aluminum alloy are better than those of ZL205A aluminum alloy, and with the increase of temperature, the drop of strength of Al-Cu-Mg-Ag aluminum alloy is slighter than that of 205A aluminum alloy. The room temperature elongations of the two alloys are almost the same. The intergranular corrosion depth of Al-Cu-Mg-Ag aluminum alloy is in the range of 182-246 μm, lower than 274-337 μm of that of the ZL205A aluminum alloy. The width of precipitate free zone of Al-Cu-Mg-Ag aluminum alloy is narrower than that of ZL205A aluminum alloy.
    • FullText(HTML)
    • References (14)
  • [1]
    贾泮江,陈邦峰.ZL205A合金高强优质铸件在大飞机上的应用[J].材料工程, 2009, 37(1):77-80.
    [2]
    刘家军.ZL205A高强铝合金铸件腐蚀行为研究[D].哈尔滨:哈尔滨工业大学, 2014.
    [3]
    黄建余,付永红,穆耀钊,等.ZL205A铝合金微弧氧化研究[J].热加工工艺, 2011, 40(2):131-133.
    [4]
    谭茂林,韩新罡,魏刚,等.ZL205A微弧氧化膜层耐蚀性能研究[J].热加工工艺, 2018, 47(16):144-145.
    [5]
    刘化深,张文兴,白涛.ZL205A铸造铝合金材料在海洋环境下的腐蚀断裂分析[J].热加工工艺, 2017, 46(22):257-260.
    [6]
    王建,王杰芳,郭巧能,等.Al-Cu-Mg-Ag合金热处理工艺的研究进展[J].金属热处理, 2015, 40(3):163-168.
    [7]
    蔡金伶,易丹青,王宏伟,等.Ag对Al-Cu-Mg合金Ω相析出行为的影响[J].中国有色金属学报, 2011, 21(7):1504-1512.
    [8]
    刘晓艳,王召朋,龙亮,等.Mg与Ag含量对Al-Cu-Mg-Ag新型耐热铝合金晶间腐蚀性能的影响[J].材料工程, 2016, 44(9):68-75.
    [9]
    刘海平.Ag、Cu、Mg对Al-Cu-Mg-Ag合金组织与时效硬化行为的影响[D].锦州:辽宁工业大学, 2015.
    [10]
    宋旼,陈康华,黄兰萍.微量Ag对Al-Cu-Mg合金显微组织与力学性能的影响[J].粉末冶金材料科学与工程, 2006, 11(3):159-163.
    [11]
    王建华.2618耐热铝合金的组织与力学性能的研究[D].长沙:中南大学, 2003.
    [12]
    刘志义,李云涛,刘延斌,等.Al-Cu-Mg-Ag合金析出相的研究进展[J].中国有色金属学报, 2007, 17(12):1905-1915.
    [13]
    刘斯琦,屈华,董晓超,等.Al-Cu-Mg-Ag合金强化相价电子结构与热稳定性[J].特种铸造及有色合金, 2013, 33(8):772-775.
    [14]
    齐浩,刘晓艳,梁顺星,等.Al-Cu-Mg-Ag新型耐热铝合金的抗腐蚀性能[J].中国有色金属学报, 2015, 25(11):3033-3039.
    • Related Articles

  • Related Articles

    [1]GENG Yaoxiang, SHAN Zhifa, CHEN Yongkang, ZAI Chunfeng, WANG Xiao, GAO Xing, WANG Yuxin. Processability, Microstructure, and Mechanical Property of Al-Si-Mg-Zr-Cu Alloy Fabricated by Selective Laser Melting[J]. Development and Application of Materials, 2024, 39(1): 23-29.
    [2]ZHAO Fangfang, YANG Jichao, GUO Xiaohui, LI Ruiwu, MA Zhaowei. Microstructure and Properties of 10 mm Thick C-276 Alloy Plates by K-TIG Welding[J]. Development and Application of Materials, 2023, 38(2): 23-26.
    [3]YANG Yong, WANG Binbin, LI Yanjie, LUO Liangshun, HUANG Haiguang, WANG Liang, SU Yanqing, GUO Jingjie, FU Hengzhi. Impact of Trace Cu Addition on Microstructure, Mechanical Property and Corrosion Behavior of TA10 Alloy[J]. Development and Application of Materials, 2022, 37(3): 5-12,20.
    [4]LI Zhaofeng, JIANG Peng, YANG Xuedong. Microstructure and Properties of TiCu0.5Al0.5Cr0.2Ni0.1 High-Entropy Alloy[J]. Development and Application of Materials, 2020, 35(3): 10-15.
    [5]CAO Chunpeng, ZHANG Zhen, DENG Yunlai. Effect of Microstructure of Al-Zn-Mg-T4 Aluminum Plate on Exfoliation Corrosion Resistance[J]. Development and Application of Materials, 2018, 33(2): 89-94. DOI: 10.19515/j.cnki.1003-1545.2018.02.015
    [6]ZHANG Wenli, CHA Xiaoqin, LUO Xianfu, LIU Xiaoyong. Effects of the Microstructure of AA 5083 H116 Plate on Its Corrosion Behavior[J]. Development and Application of Materials, 2017, 32(1): 6-11. DOI: 10.19515/j.cnki.1003-1545.2017.01.002
    [7]REN Guanpeng, GUO Xiaohui, LIU Zhiying, XU Jialei, ZHANG Yunhao. Effect of Different Welding Process on Weld Microstructure and Intergranular Corrosion Resistance for Hastelloy C-276[J]. Development and Application of Materials, 2016, 31(5): 40-44. DOI: 10.19515/j.cnki.1003-1545.2016.05.010
    [8]ZHA Xiao-qin, HAN Hong-min, XIE Yu-lin, LI Xue-feng, ZHANG Jin-min. Pitting Corrosion Resistance of 0Cr17Ni4Cu4Nb Martensitic Stainless Steel and Influence of Microstructure[J]. Development and Application of Materials, 2012, 27(4): 64-68. DOI: 10.19515/j.cnki.1003-1545.2012.04.015
    [9]WANG Yue, FU Zi-lai, ZHANG Yan-yang. Corrosion Resistance Properties of Welded Joints of Aluminum Alloys Containing Trace Sc[J]. Development and Application of Materials, 2007, 22(3): 37-39,56. DOI: 10.19515/j.cnki.1003-1545.2007.03.010
    [10]Zhao Ping, ‚Lei Yuntao. Analyses on the Microstructure of Mg-LPC Alloy[J]. Development and Application of Materials, 2003, 18(6): 24-26. DOI: 10.19515/j.cnki.1003-1545.2003.06.007

  • Cited by

    Periodical cited type(2)

    1. 王莹，陈立佳，周舸，张浩宇，张思倩. T6态热挤压Al-5Cu-08Mg-015Zr-02Sc-05Ag合金的低周疲劳行为. 沈阳工业大学学报. 2024(01): 77-81 .
    2. 张思瑶，张卓栋，常延丽. S~(2-)对高强Cu-7Ni-3Al合金在NaCl溶液中耐蚀性能的影响. 材料开发与应用. 2023(06): 15-21 . 本站查看

    Other cited types(1)

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (257) PDF downloads (18) Cited by(3)
    Related

    Copyright © 《Development and Application of Materials》豫ICP备13020589号-2

    Adress: No.169, Binhe South Road, Luolong District, Luoyang City, Henan Province，China  Tel: (0379)67256265;  (0379)67256345  Email: TG023@163.com

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return