Research Progress on Constitutive Modeling and Simulation of Electrically-Assisted Forming of Titanium Alloys

LEI Yiwen; LIU Yan; ZHANG Qianwen; HE Wenbo; LI Xifeng

Volume 39 Issue 4

Aug. 2024

Turn off MathJax

Article Contents

Abstract

References

Development and Application of Materials > 2024 > 39(4): 98-109.

LEI Yiwen, LIU Yan, ZHANG Qianwen, HE Wenbo, LI Xifeng. Research Progress on Constitutive Modeling and Simulation of Electrically-Assisted Forming of Titanium Alloys[J]. Development and Application of Materials, 2024, 39(4): 98-109.

Citation:

PDF (11933 KB)

Research Progress on Constitutive Modeling and Simulation of Electrically-Assisted Forming of Titanium Alloys

1. Institute of Forming Technology & Equipment, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200030, China;
2. Capital Aerospace Machinery Corporation, Beijing 100076, China;
3. Avic Xi'an Aircraft Industry Group Company Ltd., Xi'an 710089, China

More Information

Received Date: March 16, 2024
Available Online: September 11, 2024

Graphical Abstract

Abstract

Abstract

Electrically-assisted technology has the advantages of reducing the material deformation resistance and improving the forming accuracy of parts, and has been widely used in the high-quality precision forming of lightweight and difficult-to-deform titanium alloys. The combined effect of Joule thermal effect and athermal effect induced by electric current has multiple influences on the mechanical properties and microstructures of titanium alloys. Therefore, it is still controversial whether the traditional constitutive models can accurately describe the mechanical behaviors of materials in electrically-assisted forming process. In this paper, firstly, we summarize the studies on the electroplastic effect mechanism, and clarify the influence of electric current on macroscopic mechanical behaviors and microstructure evolutions of titanium alloys. Secondly, the advancements and limitations of current material constitutive models in the electrically-assisted forming process are sorted out, and how to investigate the electrically-assisted forming process of titanium alloys with the aid of computer simulation methods at different scales is reviewed. Finally, the future research trends of constitutive model and simulation technology of electrically-assisted forming of titanium alloy are envisioned.
- titanium alloys,
- electroplasticity,
- constitutive model,
- finite element method,
- molecular dynamics

FullText(HTML)

References (45)

References

[1]	ALABORT E, BARBA D, SHAGIEV M R, et al. Alloys-by-design:application to titanium alloys for optimal superplasticity[J]. ActaMaterialia, 2019, 178:275-287.
[2]	ZHAO J, WANG K H, LV L X, et al. Effect of grain size on the yield stress and microscopic mechanism of a near-α titanium alloy during non-superplastic hot deformation[J]. Materials Science and Engineering:A, 2022, 840:142932.
[3]	KISHIDA K, KIM J G, NAGAE T, et al. Experim-ental evaluation of critical resolved shear stress for the first-order pyramidal c+a slip in commercially pure Ti by micropillar compression method[J]. Acta Materi-alia, 2020, 196:168-174.
[4]	WANG K H, KOPEC M, CHANG S P, et al. Enhanced formability and forming efficiency for two-phase titanium alloys by Fast light Alloys Stamping Technology (FAST)[J]. Materials&Design, 2020, 194:108948.
[5]	CHEN Z, ZHONG D L, SUN Q, et al. Effect of α phase fraction on the dynamic mechanical behavior of a dual-phase metastable β titanium alloy Ti-10V-2Fe-3Al[J]. Materials Science and Engineering:A, 2021, 816:141322.
[6]	LIU Y Z, WAN M, MENG B. Multiscale modeling of coupling mechanisms in electrically assisted deformation of ultrathin sheets:an example on a nickelba-sed superalloy[J]. International Journal of Machine Tools and Manufacture, 2021, 162:103689.
[7]	LI C Z, XU Z T, PENG L F, et al. An electric-pulse-assisted stamping process towards springback suppression and precision fabrication of micro channels[J]. International Journal of Mechanical Sciences, 2022, 218:107081.
[8]	李细锋,曹旭东,王斌,等.钛合金电辅助塑性成形技术研究进展[J].航空制造技术, 2021, 64(17):22-30.
[9]	CAO X D, AN D Y, LIU Q, et al. Precipitation hardening characterization and stress prediction model in electrically-assisted Ti2AlNb uniaxial tension[J]. Intermetallics, 2024, 167:108214.
[10]	LI H, JIN F Z, ZHANG M Y, et al. Decoupling electroplasticity by temporal coordination design of pulse current loading and straining[J]. Materials Science and Engineering:A, 2023, 881:145435.
[11]	LI M H, ZHANG B, CHEN G Q, et al. Temperature dependence of electroplastic effect on reducing the ultimate stress in Ti-6Al-2Zr-1Mo-1V alloy during tension[J]. Materials Science and Engineering:A, 2023, 863:144545.
[12]	LI X N, XU Z T, GUO P, et al. Electroplasticity mechanism study based on dislocation behavior of Al6061 in tensile process[J]. Journal of Alloys and Compounds, 2022, 910:164890.
[13]	LIU Y Z, MENG B, DU M, et al. Electroplastic effect and microstructural mechanism in electrically assisted deformation of nickel-based superalloys[J]. Materials Science and Engineering:A, 2022, 840:142975.
[14]	MAGARGEE J, MORESTIN F, CAO J. Characterization of flow stress for commercially pure titanium subjected to electrically assisted deformation[J]. Journal of Engineering Materials and Technology, 2013, 135(4):041003.
[15]	ZHAO S T, ZHANG R P, CHONG Y, et al. Defect reconfiguration in a Ti-Al alloy via electroplasticity[J]. Nature Materials, 2021, 20:468-472.
[16]	LI X Q, TURNER J, BUSTILLO K, et al. In situ transmission electron microscopy investigation of electroplasticity in single crystal nickel[J]. ActaMateria-lia, 2022, 223:117461.
[17]	IZADPANAH S, CAO X D, AN D Y, et al. One step forward to electrically assisted forming mechanisms and computer simulation:areview[J]. Advanced Engineering Materials, 2023, 25(5):2200425.
[18]	OKAZAKI K, KAGAWA M, CONRAD H. An evaluation of the contributions of skin, pinch and heating effects to the electroplastic effect in titatnium[J]. Materials Science and Engineering, 1980, 45(2):109-116.
[19]	WANG X W, XU J, JIANG Z L, et al. Size effects on flow stress behavior during electrically-assisted micro-tension in a magnesium alloy AZ31[J]. Materials Science and Engineering:A, 2016, 659:215-224.
[20]	DONG H R, ZHOU H, LI Y, et al. Temperature-dependent electroplasticity in the Invar 36 alloy[J]. Journal of Materials Research and Technology, 2024, 29:3842-3848.
[21]	KRISHNASWAMY H, TIWARI J, AMIRTHALING-AM M. Revisiting electron-wind effect for electroplasticity:a critical interpretation[J]. Vacuum, 2024, 221:112937.
[22]	CONRAD H, SPRECHER A F, CAO W D, et al. Electroplasticity-the effect of electricity on the mechanical properties of metals[J]. JOM, 1990, 42(9):28-33.
[23]	韩建超,张孟非,王斌,等.钛合金电致塑性本构方程及多物理场耦合分析[J].机械工程学报, 2024, 60(9):421-433.
[24]	张正义. TC4钛合金电致塑性效应机理与本构关系的研究[D].秦皇岛:燕山大学, 2022.
[25]	LEE T, MAGARGEE J, NG M K, et al. Constitutive analysis of electrically-assisted tensile deformation of CP-Ti based on non-uniform thermal expansion, plastic softening and dynamic strain aging[J]. International Journal of Plasticity, 2017, 94:44-56.
[26]	ZHENG Q, SHIMIZU T, SHIRATORI T, et al. Ten-sile properties and constitutive model of ultrathin pure titanium foils at elevated temperatures in microforming assisted by resistance heating method[J]. Materials&Design, 2014, 63:389-397.
[27]	HARIHARAN K, LEE M G, KIM M J, et al. Decoupling thermal and electrical effect in an electrically assisted uniaxial tensile test using finite element analysis[J]. Metallurgical and Materials Transactions A, 2015, 46(7):3043-3051.
[28]	BAO J X, DING C G, XU J, et al. Characterization of stress drop and strain localization for titanium alloy subjected to electrically-assisted tension[J]. Journal of Materials Research and Technology, 2024, 28:4600-4614.
[29]	LI D L, YU E L. An approach based on the classical free-electron theory to study electroplasticeffect[J]. Advanced Materials Research, 2010, 148-149:71-74.
[30]	KOCKS U F, MECKING H. Physics and phenomenology of strain hardening:the FCC case[J]. Progress in Materials Science, 2003, 48(3):171-273.
[31]	KIM M J, YOON S, PARK S, et al. Elucidating the origin of electroplasticity in metallic materials[J]. Applied Materials Today, 2020, 21:100874.
[32]	KELLER C, HUG E. Kocks-Mecking analysis of the size effects on the mechanical behavior of nickel polycrystals[J]. International Journal of Plasticity, 2017, 98:106-122.
[33]	KIM M J, LEE M G, HARIHARAN K, et al. Electric current-assisted deformation behavior of Al-Mg-Si alloy under uniaxial tension[J]. International Journal of Plasticity, 2017, 94:148-170.
[34]	周宇杰,刘斌,武川,等.基于位错密度的钛合金电辅助压缩仿真与实验验证[J].精密成形工程, 2023, 15(1):51-60.
[35]	XU Z T, JIANG T H, HUANG J H, et al. Electroplasticity in electrically-assisted forming:process phenomena, performances and modelling[J]. International Journal of Machine Tools and Manufacture, 2022, 175:103871.
[36]	TIWARI J, BALAJI V, KRISHNASWAMY H, et al. Dislocation density based modelling of electrically assisted deformation process by finite element approach[J]. International Journal of Mechanical Sciences, 2022, 227:107433.
[37]	HARIHARAN K, KIM M J, HONG S T, et al. Electroplasticbehaviour in an aluminium alloy and dislocation density based modelling[J]. Materials&Design, 2017, 124:131-142.
[38]	BAO J X, CHEN W J, BAI J N, et al. Local softening deformation and phase transformation induced by electric current in electrically-assisted micro-compression of Ti-6Al-4V alloy[J]. Materials Science and Engineering:A, 2022, 831:142262.
[39]	周宇杰,曲周德,武川,等.钛合金电辅助拉伸变形的三场耦合建模与试验研究[J].塑性工程学报, 2022, 29(8):158-167.
[40]	CHUAN W, WEI L H, LU L, et al. Electrical-thermal-mechanical coupled modeling and simulation on deformation behaviors of Ti6554 alloy in electrically-assisted micro-tension[J]. Computational Materials Science, 2024, 231:112567.
[41]	WARYOBA D, ISLAM Z, REUTZEL T, et al. Electro-strengthening of the additively manufactured Ti-6Al-4V alloy[J]. Materials Science and Engineer-ing:A, 2020, 798:140062.
[42]	ZOPE R R, MISHIN Y. Interatomic potentials for atomistic simulations of the Ti-Al system[J]. Physical Review B, 2003, 68(2):024102.
[43]	DJURABEKOVA F, PARVIAINEN S, POHJONEN A, et al. Atomistic modeling of metal surfaces under electric fields:direct coupling of electric fields to a molecular dynamics algorithm[J]. Physical Review E, 2011, 83(2):026704.
[44]	WARYOBA D, ISLAM Z, WANG B M, et al. Low temperature annealing of metals with electrical wind force effects[J]. Journal of Materials Science&Technology, 2019, 35(4):465-472.
[45]	WARYOBA D, ISLAM Z, WANG B M, et al. Recrystallization mechanisms of Zircaloy-4 alloy annealed by electric current[J]. Journal of Alloys and Compounds, 2020, 820:153409.

[1]	TONG Zhiyuan, GONG Xuhui. Physical Constitutive Model of Tensile Plastic Strain for 10CrNi8MoV Steel[J]. Development and Application of Materials, 2022, 37(5): 11-15.
[2]	LIU Mingguang, LI Liang, WANG Wei. Study on Preparation and Kinetics of Silicon-containing Polyurethane[J]. Development and Application of Materials, 2021, 36(1): 7-12.
[3]	FAN Youyou, ZHANG Huifeng, CHEN Li. Steel Band Loading Technology and Its Finite Element Analysis of Fuselage Force Simulation[J]. Development and Application of Materials, 2020, 35(3): 72-76.
[4]	HU Taotao, MAO Wei, GUAN Peng, XIAO Zhen, MU Yongjun, ZHOU Jun. Finite Element Simulation of Mechanical Properties of Core-shell Structured Titanium-nitrogen Alloys[J]. Development and Application of Materials, 2020, 35(2): 13-17.
[5]	YANG Huiyi, ZHONG Yuping, ZHANG Xiaowen. Development of Dynamic Analysis of Bellows[J]. Development and Application of Materials, 2020, 35(1): 91-95,100.
[6]	TAO Huan, ZENG Weidong, ZHANG Saifei, HAN Maosheng. Finite Element Simulation of Cold Pilgering Process of TA18 Tubes[J]. Development and Application of Materials, 2016, 31(4): 76-81. DOI: 10.19515/j.cnki.1003-1545.2016.04.014
[7]	ZHANG Qiang, LIU Xiao-min. The Calculation and Verification of Embedded Atom Potential on Titanium[J]. Development and Application of Materials, 2013, 28(3): 31-35. DOI: 10.19515/j.cnki.1003-1545.2013.03.008
[8]	LIU Qian, YUE Hong, ZHANG Hui-jun, ZHUANG Chang-qing. Research Progress on Molecular Simulation in Compatibility of Polymer Blends[J]. Development and Application of Materials, 2011, 26(3): 92-96,102. DOI: 10.19515/j.cnki.1003-1545.2011.03.024
[9]	ZHANG Qiang. Molecular Dynamics Simulation of Tension on Titanium[J]. Development and Application of Materials, 2011, 26(3): 4-7. DOI: 10.19515/j.cnki.1003-1545.2011.03.002
[10]	WANG Bing, SUN She-ying. An Investigation on the Influence of Molecular Structure upon Dynamic Mechanical Properties of Polymer Materials[J]. Development and Application of Materials, 2005, 20(3): 42-46. DOI: 10.19515/j.cnki.1003-1545.2005.03.013

Cited By

Get Citation

PDF

XML

Article Metrics

Article views (103) PDF downloads (26)

Research Progress on Constitutive Modeling and Simulation of Electrically-Assisted Forming of Titanium Alloys

Abstract

References

Related Articles

Catalog

Article Metrics

Related

Research Progress on Constitutive Modeling and Simulation of Electrically-Assisted Forming of Titanium Alloys

Abstract

References

Related Articles

Catalog

Article Metrics

Related

Export File

Citation

Format

Content