ZHANG Hao, WEI Jin-shan, ZHANG Jing-hai. Study on the Acicular Ferrite with Basket-Weave Morphology in Deposited Metal[J]. Development and Application of Materials, 2005, 20(3): 14-16,21. DOI: 10.19515/j.cnki.1003-1545.2005.03.005
Citation: ZHANG Hao, WEI Jin-shan, ZHANG Jing-hai. Study on the Acicular Ferrite with Basket-Weave Morphology in Deposited Metal[J]. Development and Application of Materials, 2005, 20(3): 14-16,21. DOI: 10.19515/j.cnki.1003-1545.2005.03.005

Study on the Acicular Ferrite with Basket-Weave Morphology in Deposited Metal

More Information
  • Received Date: October 19, 2004
  • Available Online: June 14, 2024
  • In this paper,the microstructure of acicular ferrite in deposited metal are analyzed by means of TEM and covering solid wire technology.The results show that the acicular ferrite with basket-weave morphology consists of the ferrite laths in parallel packets which appear as a 90-deg interlocking pattern. With the increase of Ni content(from 1.90% to 2.49%) and decrease of Cr content(from 1.1% to 0.8%),the fraction of the acicular ferrite with basket-weave morphology increases in deposited metal.
  • Related Articles

    [1]LIU Xin, HU Yulong, LIU Nian, SU Xiaohong, CHEN Shan. Effect of Solution and Aging Treatment on Corrosion Resistance of HDR Duplex Stainless Steel[J]. Development and Application of Materials, 2023, 38(2): 32-37.
    [2]JI Bo, SUN Jifeng. Influence of Solution and Aging Temperature on Microstructures and Mechanical Properties of 7715D Titanium Alloy[J]. Development and Application of Materials, 2019, 34(1): 36-44. DOI: 10.19515/j.cnki.1003-1545.2019.01.008
    [3]ZHANG Yibin. Influence of Normalizing on Phase Transformation of ZG 230-450H during Reheating Process[J]. Development and Application of Materials, 2017, 32(1): 42-47. DOI: 10.19515/j.cnki.1003-1545.2017.01.008
    [4]YANG Shu, ZHANG Yuxiang, YANG Chaofei. Continuous Cooling Transformation Behavior of 370 MPa 10CrNiCu Casting[J]. Development and Application of Materials, 2016, 31(5): 10-12. DOI: 10.19515/j.cnki.1003-1545.2016.05.003
    [5]WANG Jian, ZHOU Ting-jun, JIN Wei, YAN Ying. Effect of Heat Treatment on Transformation Behavior and Tensile Properties of Ti-50.8Ni Alloy[J]. Development and Application of Materials, 2009, 24(1): 30-31,38. DOI: 10.19515/j.cnki.1003-1545.2009.01.009
    [6]WANG Xiao-hong, ZHANG Bo-ming, DU Shan-yi, YU Dong. Research on Performances and Parameter of NiTi Shape Memory Alloys with Different Initial Microstructure[J]. Development and Application of Materials, 2009, 24(1): 12-15. DOI: 10.19515/j.cnki.1003-1545.2009.01.004
    [7]XIE Qing-feng, LI Hao, GAO Yan. Influence of Heat Treatment on Phase Transformation of NiTi Shape Memory Alloys[J]. Development and Application of Materials, 2007, 22(2): 5-7. DOI: 10.19515/j.cnki.1003-1545.2007.02.002
    [8]ZHAO Rong-da, WANG Xiao-li, ZHANG Wei-qiang, ZHU Hong-fei. Influence of Cu on Properties of Low Carbon Antibacterical Martensite Stainless Steel[J]. Development and Application of Materials, 2006, 21(5): 14-16. DOI: 10.19515/j.cnki.1003-1545.2006.05.005
    [9]LUO Feng-hua, CHEN Jia-yan, LIU Lang-fei, Katsunari Oikawa, Kiyohito Ishida. Martensitic Transformation and Damping Capacity of Co41Ni33Al26 Alloy Ribbons Fabricated by Cold Rolling Method[J]. Development and Application of Materials, 2006, 21(2): 9-13,23. DOI: 10.19515/j.cnki.1003-1545.2006.02.003
    [10]Wang Dongfeng, Kang Buxi, Liu Ping, Tian Baohong, Huang Jinliang. Phase Transformation Kinetics of Solutioned Cu-Ni-Si Alloy[J]. Development and Application of Materials, 2003, 18(5): 1-3,13. DOI: 10.19515/j.cnki.1003-1545.2003.05.001

Catalog

    Article Metrics

    Article views (30) PDF downloads (2) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return