SHEN Xiong-fei, CHEN Ti-jun. Dry Friction and Wear Properties of a New Zinc-aluminium Based Alloy ZA27-0.2Si[J]. Development and Application of Materials, 2009, 24(2): 21-24. DOI: 10.19515/j.cnki.1003-1545.2009.02.006
Citation: SHEN Xiong-fei, CHEN Ti-jun. Dry Friction and Wear Properties of a New Zinc-aluminium Based Alloy ZA27-0.2Si[J]. Development and Application of Materials, 2009, 24(2): 21-24. DOI: 10.19515/j.cnki.1003-1545.2009.02.006

Dry Friction and Wear Properties of a New Zinc-aluminium Based Alloy ZA27-0.2Si

More Information
  • Received Date: January 13, 2009
  • Available Online: March 29, 2024
  • Dry friction and wear properties of ZA27-0.2Si were investigaited in different load and speed.The wear surface and subsurface microstructure were observed under scanning electron microscopy. The result showed that wear volume increases obviously with load increaseing in high speed, but increases slightly in low speed.The friction mechanism is different in various conditions.
  • Related Articles

    [1]LIU Xin, HU Yulong, LIU Nian, SU Xiaohong, CHEN Shan. Effect of Solution and Aging Treatment on Corrosion Resistance of HDR Duplex Stainless Steel[J]. Development and Application of Materials, 2023, 38(2): 32-37.
    [2]JI Bo, SUN Jifeng. Influence of Solution and Aging Temperature on Microstructures and Mechanical Properties of 7715D Titanium Alloy[J]. Development and Application of Materials, 2019, 34(1): 36-44. DOI: 10.19515/j.cnki.1003-1545.2019.01.008
    [3]ZHANG Yibin. Influence of Normalizing on Phase Transformation of ZG 230-450H during Reheating Process[J]. Development and Application of Materials, 2017, 32(1): 42-47. DOI: 10.19515/j.cnki.1003-1545.2017.01.008
    [4]YANG Shu, ZHANG Yuxiang, YANG Chaofei. Continuous Cooling Transformation Behavior of 370 MPa 10CrNiCu Casting[J]. Development and Application of Materials, 2016, 31(5): 10-12. DOI: 10.19515/j.cnki.1003-1545.2016.05.003
    [5]WANG Jian, ZHOU Ting-jun, JIN Wei, YAN Ying. Effect of Heat Treatment on Transformation Behavior and Tensile Properties of Ti-50.8Ni Alloy[J]. Development and Application of Materials, 2009, 24(1): 30-31,38. DOI: 10.19515/j.cnki.1003-1545.2009.01.009
    [6]WANG Xiao-hong, ZHANG Bo-ming, DU Shan-yi, YU Dong. Research on Performances and Parameter of NiTi Shape Memory Alloys with Different Initial Microstructure[J]. Development and Application of Materials, 2009, 24(1): 12-15. DOI: 10.19515/j.cnki.1003-1545.2009.01.004
    [7]XIE Qing-feng, LI Hao, GAO Yan. Influence of Heat Treatment on Phase Transformation of NiTi Shape Memory Alloys[J]. Development and Application of Materials, 2007, 22(2): 5-7. DOI: 10.19515/j.cnki.1003-1545.2007.02.002
    [8]ZHAO Rong-da, WANG Xiao-li, ZHANG Wei-qiang, ZHU Hong-fei. Influence of Cu on Properties of Low Carbon Antibacterical Martensite Stainless Steel[J]. Development and Application of Materials, 2006, 21(5): 14-16. DOI: 10.19515/j.cnki.1003-1545.2006.05.005
    [9]LUO Feng-hua, CHEN Jia-yan, LIU Lang-fei, Katsunari Oikawa, Kiyohito Ishida. Martensitic Transformation and Damping Capacity of Co41Ni33Al26 Alloy Ribbons Fabricated by Cold Rolling Method[J]. Development and Application of Materials, 2006, 21(2): 9-13,23. DOI: 10.19515/j.cnki.1003-1545.2006.02.003
    [10]Wang Dongfeng, Kang Buxi, Liu Ping, Tian Baohong, Huang Jinliang. Phase Transformation Kinetics of Solutioned Cu-Ni-Si Alloy[J]. Development and Application of Materials, 2003, 18(5): 1-3,13. DOI: 10.19515/j.cnki.1003-1545.2003.05.001

Catalog

    Article Metrics

    Article views (35) PDF downloads (1) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return