LU Xian-xiao. Fabrication and Properties of Sandwich Structure Acoustic Absorption Composite Materials[J]. Development and Application of Materials, 2013, 28(5): 64-67. DOI: 10.19515/j.cnki.1003-1545.2013.05.016
Citation: LU Xian-xiao. Fabrication and Properties of Sandwich Structure Acoustic Absorption Composite Materials[J]. Development and Application of Materials, 2013, 28(5): 64-67. DOI: 10.19515/j.cnki.1003-1545.2013.05.016

Fabrication and Properties of Sandwich Structure Acoustic Absorption Composite Materials

More Information
  • Received Date: November 15, 2012
  • Available Online: March 21, 2024
  • The sandwich structure acoustic absorption composite materials which reinforced by continuous fiber was fabricated by vacuum assisted resin injection (VARI). The mechanical behavior of the sandwich structure composites reinforced in axial orientation is evaluated under axial compression and bend loads. The underwater acoustic absorption behavior is tested by acoustic impulse tube test system. The results indicated that the absorption core layer, composite panels and the lattice structure formed a whole structure and the fabrication method is feasible. Compared with materials of the same kind, the axial compression and the bending rigidity of the grooved perforation sandwich structure, is improved by an order of magnitude and doubled, respectively, while the acoustic property has no obvious change.
  • Related Articles

    [1]WANG Yu, ZHENG Wenjian, ZHUO Min, FENG Daochen, YANG Jianguo. Analysis of Stress Corrosion Cracking in Welded Joints of Q345R High-Pressure Air Cooler[J]. Development and Application of Materials, 2023, 38(5): 86-93.
    [2]XUE Gang. Analysis of the Size Effects on the Elastic Stress Concentration Factors at the Top of the Penetrating Notch in the Center of the Double-tension-plate[J]. Development and Application of Materials, 2023, 38(2): 1-9.
    [3]TENG Kui, LUO Xianfu, LI Hongping, CHA Xiaoqin. Study on Stress Corrosion Cracking Behavior of T Profiles of 7055 Aluminum Alloy[J]. Development and Application of Materials, 2021, 36(4): 44-50.
    [4]DING Penglong, NIU Jiajia, BAO Wenshuai, XIA Liqian, WANG Tao. Numerical Analysis on Fatigue Life of Welded Longitudinal Beam with Notch Stress Method[J]. Development and Application of Materials, 2020, 35(5): 76-80.
    [5]ZHONG Yuping, LI Jie, YAN Tinglai, ZHANG Aiqin, ZHANG Xiaowen, YANG Yuqing, ZHANG Yujia. Calculation and Extraction of Stress Based on FEA for Bellows[J]. Development and Application of Materials, 2018, 33(6): 101-105. DOI: 10.19515/j.cnki.1003-1545.2018.06.017
    [6]XUE Gang, GONG Xuhui, GAO Zhenpeng, WANG Tao. Experimental Validation of I1 Fracture Criterion Assumption under Approximate Biaxial Stress Condition[J]. Development and Application of Materials, 2018, 33(3): 1-9. DOI: 10.19515/j.cnki.1003-1545.2018.03.001
    [7]YANG Jia-yong, KONG Bin, JIANG Kun, CENG Zeng, ZHANG Long, WANG Bo. The Research of Thermal Stress on Corrugated Structure[J]. Development and Application of Materials, 2015, 30(5): 40-48. DOI: 10.19515/j.cnki.1003-1545.2015.05.008
    [8]XUE Gang. Fracture Criterion Hypothesis Based on First Stress Invariant[J]. Development and Application of Materials, 2014, 29(6): 1-5. DOI: 10.19515/j.cnki.1003-1545.2014.06.001
    [9]WU Chun-xue, SHAO Fei, ZHANG Yong-feng, REN Fang-jie. Research on Stress Corrosion Resistance and Critical Crack Size of 38CrNi3MoVA Steel[J]. Development and Application of Materials, 2012, 27(4): 1-3. DOI: 10.19515/j.cnki.1003-1545.2012.04.001
    [10]ZHANG Xiao, SHAO Jun, YAO Run-gang, WANG Ren-fu, XUE Gang. FEM Analysis of Residual Stress Induced by Ultrasonic Impact Treatment in Welded Jionts of High Strength Steel[J]. Development and Application of Materials, 2009, 24(2): 4-6,32. DOI: 10.19515/j.cnki.1003-1545.2009.02.002

Catalog

    Article Metrics

    Article views (39) PDF downloads (2) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return