ZHONG Yuping, LI Jie, YAN Tinglai, ZHANG Aiqin, ZHANG Xiaowen, YANG Yuqing, ZHANG Yujia. Calculation and Extraction of Stress Based on FEA for Bellows[J]. Development and Application of Materials, 2018, 33(6): 101-105. DOI: 10.19515/j.cnki.1003-1545.2018.06.017
Citation: ZHONG Yuping, LI Jie, YAN Tinglai, ZHANG Aiqin, ZHANG Xiaowen, YANG Yuqing, ZHANG Yujia. Calculation and Extraction of Stress Based on FEA for Bellows[J]. Development and Application of Materials, 2018, 33(6): 101-105. DOI: 10.19515/j.cnki.1003-1545.2018.06.017

Calculation and Extraction of Stress Based on FEA for Bellows

More Information
  • Received Date: May 09, 2018
  • Available Online: March 18, 2024
  • Based on the characteristics of the strength stress of bellows, the extraction and calculation of bellows stress including circumferential stress and meridional stress in element coordinate system were discussed. Stress state of half corrugated shell was analyzed and compared with the calculation according to design specification. At last, a new way of checking the strength stress of bellows was put forward in terms of node stress with FEA, such as polynomial fitting employed to check the circumferential stress. From the result of polynomial fitting, the proposed stress check based on finite element could guide practice.
  • Related Articles

    [1]CHEN Zhigang, WANG Xiaoxin, LIU Huimin, WANG Li, LI Ni, SUN Meihui, AO Min. Research Progress in Selective Laser Melting of AluminumMatrix Composites[J]. Development and Application of Materials, 2024, 39(1): 86-93,116.
    [2]LIU Rubin, BAO Shujuan, WANG Fei, LIU Yinqi, ZHU Junjie, PEI Teng. Optimal Selection of Process Route for Electron Beam Cold Hearth Melting TC4 Alloy[J]. Development and Application of Materials, 2018, 33(2): 68-72. DOI: 10.19515/j.cnki.1003-1545.2018.02.011
    [3]HE Lei, XUE Gang, ZHU Bingkun. Calculating Model on the Melting Point of CaO-SiO2-CaF2 Slag System[J]. Development and Application of Materials, 2017, 32(2): 7-10. DOI: 10.19515/j.cnki.1003-1545.2017.02.002
    [4]CHANG Huaqiang, ZHU Junjie, LIU Yinqi, LI Bobo, ZHAO Xiangyu. Influence of Vacuum Colling Time of Electron Beam Cold Hearth Melting on Ti Ingot Straightness[J]. Development and Application of Materials, 2017, 32(1): 58-61. DOI: 10.19515/j.cnki.1003-1545.2017.01.011
    [5]BAO Shu-juan. Research Development on Electron Beam Cold Hearth Melting of TC4 Alloy[J]. Development and Application of Materials, 2012, 27(5): 87-90. DOI: 10.19515/j.cnki.1003-1545.2012.05.022
    [6]FU Zi-lai. The Machining Characteristic of Melt foamed Aluminum[J]. Development and Application of Materials, 2010, 25(5): 72-77. DOI: 10.19515/j.cnki.1003-1545.2010.05.020
    [7]GU Xin-sheng, YAO Run-gang, KONG Hong-yu, YI Chuan-bao. Optimization of Melting Process of Fused Flux for Welding of High-strength Steel[J]. Development and Application of Materials, 2010, 25(3): 1-3. DOI: 10.19515/j.cnki.1003-1545.2010.03.001
    [8]ZHANG Xiu-hai, SU Guang-cai, PANG Zu-gao, LI Hua. Feasibitity of A New Technique for Melting of Heat Resistant Al-bearing Cast Iron[J]. Development and Application of Materials, 2004, 19(4): 1-3,15. DOI: 10.19515/j.cnki.1003-1545.2004.04.001
    [9]XU Jian, XING Jian-dong, LI Jing-yin. Melting and Casting Characteristics of Nickel Aluminum Bronze[J]. Development and Application of Materials, 2004, 19(2): 36-39. DOI: 10.19515/j.cnki.1003-1545.2004.02.011
    [10]MA Fengcang, NI Feng, YANG Dixin. Vacuum Melting of High Chromium CuCr Alloy[J]. Development and Application of Materials, 2003, 18(1): 8-11. DOI: 10.19515/j.cnki.1003-1545.2003.01.003
  • Cited by

    Periodical cited type(6)

    1. 崔腾飞,成洁楠,宋健,崔中雨. 高强铝合金在极寒环境下的腐蚀行为与室内外相关性研究. 装备环境工程. 2025(01): 61-68 .
    2. 冷文俊,石西召,辛永磊,杨延格,王利,崔中雨,侯健. 极地低温海洋大气环境下Ni-Cr-Mo-V钢腐蚀行为与室内外相关性研究. 中国腐蚀与防护学报. 2024(01): 91-99 .
    3. 蔡健平,徐洪武,王伟,伍招冲. 环境试验在新时期装备环境适应性工作中应用. 装备环境工程. 2024(05): 41-49 .
    4. 马菱薇,杨雪婷,郑凯宁,王金科,王悦,杨昊. 基于单宁酸负载的自预警-自修复双重功能防腐涂层. 材料开发与应用. 2024(02): 95-105 . 本站查看
    5. 辛永磊,彭文山,温杰平,侯健,孙明先. 极地低温冻融循环环境下高强钢的腐蚀行为研究. 装备环境工程. 2024(07): 60-66 .
    6. 滕俊鹏,苏艳,金一鸣,王辉. 极低温环境适应性试验方法研究进展. 装备环境工程. 2024(12): 155-162 .

    Other cited types(0)

Catalog

    Article Metrics

    Article views (94) PDF downloads (3) Cited by(6)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return