CHANG Huaqiang, ZHU Junjie, LIU Yinqi, LI Bobo, ZHAO Xiangyu. Influence of Vacuum Colling Time of Electron Beam Cold Hearth Melting on Ti Ingot Straightness[J]. Development and Application of Materials, 2017, 32(1): 58-61. DOI: 10.19515/j.cnki.1003-1545.2017.01.011
Citation: CHANG Huaqiang, ZHU Junjie, LIU Yinqi, LI Bobo, ZHAO Xiangyu. Influence of Vacuum Colling Time of Electron Beam Cold Hearth Melting on Ti Ingot Straightness[J]. Development and Application of Materials, 2017, 32(1): 58-61. DOI: 10.19515/j.cnki.1003-1545.2017.01.011

Influence of Vacuum Colling Time of Electron Beam Cold Hearth Melting on Ti Ingot Straightness

More Information
  • Received Date: September 20, 2016
  • Available Online: March 17, 2024
  • When Ti slab smelting by electron beam cold hearth melting furnace is finished, the high temperature will bring the Ti slab bending deflection length direction. To avoid the deformation, the vacuum cooling time shall last 8 hours, and the maximum temperature is about 100℃. PROCAST FEM software and proved by practice practical production prove the maximum temperature of slab is about 200℃ after cooling 3 hours. when the temperature decreases from 200℃ to 100℃, the vacuum cooling rate is 22. 5℃/h, and the air cooling rate is 25. 7℃/h. The cooling rates in both conditions are almost same. As a conclusion, 3 hours of cooling time has a minimal influence on the deformation, while the production efficiency has been improved obviously.
  • Related Articles

    [1]LI Guo, WEI Jianhui, ZHU Jun, LI Xiang, FU Xin. Properties of Flame Retardancy and Low Toxicity of Siloxane Modified Vinyl Ester Resin Composites[J]. Development and Application of Materials, 2024, 39(3): 82-88.
    [2]XU Shanshan, BAI Shihao, MA Zhichao, CHEN Cheng. Study on Properties of Epoxy Resin Curing System for Marine Concrete Structures[J]. Development and Application of Materials, 2023, 38(1): 81-84.
    [3]LI Jidi, MEI Yong, WANG Jiaqi, PAN Qichao, GENG Zhi, ZHANG Lianwang, BAO Jianwen, ZHU Bo. Study on Flame Retardancy Promotion of Fiber Reinforced Epoxy Composites via RTM Processing[J]. Development and Application of Materials, 2021, 36(2): 19-25.
    [4]CUI Wei, WU Pingwei, DAI Jinhui. Vacuum Hot Pressing and Properties of PP/HGMS Composite[J]. Development and Application of Materials, 2020, 35(3): 43-49.
    [5]CAI Huanhuan, GUI Lin, LI Xiang, GUO Wantao. Influence of Initiator Systems on Curing Behavior of Epoxy Vinyl Ester Resin and Mechanical Properties of Thick Laminates[J]. Development and Application of Materials, 2016, 31(5): 70-75. DOI: 10.19515/j.cnki.1003-1545.2016.05.016
    [6]LIU Yuan-yuan, DAI Jin-hui, WU Ping-wei. Preparation and Properties of High Microspheres Levels of Syntactic Foam by Molded Forming[J]. Development and Application of Materials, 2015, 30(3): 72-77. DOI: 10.19515/j.cnki.1003-1545.2015.03.014
    [7]WEI Jun-wei, GUO Wan-tao, ZHANG Yong-bing. Study on Simulation Technology of Foam Sandwich Structural Composites VARI Process Molding[J]. Development and Application of Materials, 2011, 26(6): 29-36. DOI: 10.19515/j.cnki.1003-1545.2011.06.008
    [8]WEI Jun-wei, ZHANG Yong-bing, GUO Wan-tao. Development of Vacuum Assisted Resin Infusion(VARI)[J]. Development and Application of Materials, 2010, 25(3): 99-105. DOI: 10.19515/j.cnki.1003-1545.2010.03.022
    [9]WU Yu-fen, ZHANG Bo-ming. Numerical Analysis and Simulation of the Vacuum Infusion Moulding Process[J]. Development and Application of Materials, 2009, 24(6): 67-71. DOI: 10.19515/j.cnki.1003-1545.2009.06.017
    [10]YAN Gang, FAN Xiao-bin, ZHANG Xiao-mei, ZHAO Dan, ZHAO Da-wei. Effects of RTM Process Parameters on the Performance of Composites[J]. Development and Application of Materials, 2008, 23(2): 27-30,39. DOI: 10.19515/j.cnki.1003-1545.2008.02.008

Catalog

    Article Metrics

    Article views (29) PDF downloads (1) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return