Volume 39 Issue 1
Feb.  2024
Turn off MathJax
Article Contents
Abstract
References
Related Articles
CHEN Zhigang, WANG Xiaoxin, LIU Huimin, WANG Li, LI Ni, SUN Meihui, AO Min. Research Progress in Selective Laser Melting of AluminumMatrix Composites[J]. Development and Application of Materials, 2024, 39(1): 86-93,116.
Citation: CHEN Zhigang, WANG Xiaoxin, LIU Huimin, WANG Li, LI Ni, SUN Meihui, AO Min. Research Progress in Selective Laser Melting of AluminumMatrix Composites[J]. Development and Application of Materials, 2024, 39(1): 86-93,116.
shu

Research Progress in Selective Laser Melting of AluminumMatrix Composites

  • 1. School of Materials Scienceand Engineering, Inner Mongolia University of Technology, Hohhot 010051, China;

  • 2. National and Local Joint Engineering Research Center for Functional Materials Processing, School of Metallurgical Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, China;

  • 3. Institute for Advanced Materials and Technology, Beijing University of Science and Technology, Beijing 100083, China;

  • 4. Ansteel Beijing Research Institute Co., Ltd., Beijing 102200, China

More Information
  • Received Date: October 29, 2023
    Graphical Abstract
    • Abstract
  • Aluminium matrix composites are an important lightweight material, and their corrosion behaviour in service environment is closely related to the safe operation of equipment. The selective laser melting (SLM) technology provides a new technological pathway for near-net-shaping and rapid manufacturing of the aluminium matrix composite parts with complex structures. In this study, the preparation principle of SLM technology, the research progress in the mechanical and corrosion resistance properties of SLM aluminium matrix composites are reviewed, and the future research direction of the SLM aluminium matrix composites is put forward.
    • FullText(HTML)
    • References (35)
  • [1]
    SINGH J, CHAUHAN A. Characterization of hybrid aluminum matrix composites for advanced applica-tions-A review[J]. Journal of Materials Research and Technology, 2016, 5(2): 159-169.
    [2]
    SAMAL P, VUNDAVILLI P R, MEHER A, et al. Re-cent progress in aluminum metal matrix composites: a review on processing, mechanical and wear properties[J]. Journal of Manufacturing Processes, 2020, 59: 131-152.
    [3]
    CHAK V, CHATTOPADHYAY H, DORA T L. A review on fabrication methods, reinforcements and mechanical properties of aluminum matrix composites[J]. Journal of Manufacturing Processes, 2020, 56: 1059-1074.
    [4]
    JIA H L, SUN H, WANG H Z, et al. Scanning stra-tegy in selective laser melting (SLM): a review[J]. The International Journal of Advanced Manufacturing Technology, 2021, 113(9-10): 2413-2435.
    [5]
    王力. 激光粉末床熔融高强度不锈钢显微组织调控与腐蚀行为研究[D]. 北京: 北京科技大学, 2023.
    [6]
    ZHANG X, YOCOM C J, MAO B, et al. Microstructure evolution during selective laser melting of metallic materials: a review[J]. Journal of Laser Applications, 2019, 31(3):031201.
    [7]
    FANG Z C, WU Z L, HUANG C G, et al. Review on residual stress in selective laser melting additive manufacturing of alloy parts[J]. Optics & Laser Techno-logy, 2020, 129: 106283.
    [8]
    DEBROY T, WEI H L, ZUBACK J S, et al. Additive manufacturing of metallic components - Process, structure and properties[J]. Progress in Materials Science, 2018, 92: 112-224.
    [9]
    ABOULKHAIR N T, SIMONELLI M, PARRY L, et al. 3D printing of aluminium alloys: Additive manufacturing of aluminium alloys using selective laser melting[J]. Progress in Materials Science, 2019, 106: 100578.
    [10]
    WANG P, ECKERT J, PRASHANTH K G, et al. A review of particulate-reinforced aluminum matrix composites fabricated by selective laser melting[J]. Transactions of Nonferrous Metals Society of China, 2020, 30(8): 2001-2034.
    [11]
    THIJS L, KEMPEN K, KRUTH J P, et al. Finestr-uctured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg Powder[J]. Acta Materialia, 2013, 61(5): 1809-1819.
    [12]
    MARTIN J H, YAHATA B D, HUNDLEY J M, et al. 3D printing of high-strength aluminium alloys[J]. Nature, 2017, 549(7672): 365-369.
    [13]
    KIM D K, WOO W, HWANG J H, et al. Stress partitioning behavior of an AlSi10Mg alloy produced by selective laser melting during tensile deformation using in situ neutron diffraction[J]. Journal of Alloys and Compounds, 2016, 686: 281-286.
    [14]
    HADADZADEH A, BAXTER C, AMIRKHIZ B S, et al. Strengthening mechanisms in direct metal laser sintered AlSi10Mg: comparison between virgin and recycled powders[J]. Additive Manufacturing, 2018, 23: 108-120.
    [15]
    WANG Z Y, ZHUO L C, YIN E H, et al. Microstructure evolution and properties of nanoparticulate SiC modified AlSi10Mg alloys[J]. Materials Science and Engineering: A, 2021, 808: 140864.
    [16]
    GAO C, LIU Z, XIAO Z, et al. Effect of heat treatment on SLM-fabricated TiN/AlSi10Mg composites: Microstructural evolution and mechanical properties[J]. Journal of Alloys and Compounds, 2021, 853: 156722.
    [17]
    ABOULKHAIR N T, EVERITT N M, ASHCROFT I, et al. Reducing porosity in AlSi10Mg parts processed by selective laser melting[J]. Additive Manufactu-ring, 2014, 1-4: 77-86.
    [18]
    Gu D, Wang H, Chang F, et al. Selective laser melting additive manufacturing of TiC/AlSi10Mg bulk-form nanocomposites with tailored microstructures and properties[J]. Physics Procedia, 2014, 56: 108-116.
    [19]
    ZHOU S Y, WANG Z Y, SU Y, et al. Effects of micron/submicron TiC on additively manufactured AlSi10Mg: a comprehensive study from computer simulation to mechanical and microstructural analysis[J]. JOM, 2020, 72(10): 3693-3704.
    [20]
    GAO C, WU W, SHI J, et al. Simultaneous enhancement of strength, ductility, and hardness of TiN/AlSi10Mg nanocomposites via selective laser melting[J]. Additive Manufacturing, 2020, 34: 101378.
    [21]
    LI X P, JI G, CHEN Z, et al. Selective laser melting of nano-TiB2 decorated AlSi10Mg alloy with high fracture strength and ductility[J]. Acta Materialia, 2017, 129: 183-193.
    [22]
    XI L X, ZHANG H, WANG P, et al. Comparative in-vestigation of microstructure, mechanical properties and strengthening mechanisms of Al-12Si/TiB2 fabricated by selective laser melting and hot pressing[J]. Ceramics International, 2018, 44(15): 17635-17642.
    [23]
    LIAO H L, ZHANG W Q, CHEN C P, et al. Hybrid reinforced aluminum matrix composites fabricated by selective laser melting[J]. Intermetallics, 2021, 131: 107080.
    [24]
    TAN Q Y, FAN Z Q, TANG X Q, et al. A novel st-rategy to additively manufacture 7075 aluminium alloy with selective laser melting[J]. Materials Science and Engineering: A, 2021, 821: 141638.
    [25]
    XI L X, DING K, ZHANG H, et al. In-situ synthe-sis of aluminum matrix nanocomposites by selective laser melting of carbon nanotubes modified Al-Mg-Sc-Zr alloys[J]. Journal of Alloys and Compounds, 2022, 891: 162047.
    [26]
    XU S Q, LI B L, LV Z X, et al. Microstructures and mechanical behaviors of reinforced aluminum matrix composites with modified nano-sized TiB2/SiC fabricated by selective laser melting[J]. Composites Communications, 2023, 37: 101439.
    [27]
    ZHENG T Q, PAN S H, MURALI N, et al. Selective laser melting of novel 7075 aluminum powders with internally dispersed TiC nanoparticles[J]. Materials Letters, 2022, 319: 132268.
    [28]
    JI Y C, DONG C F, KONG D C, et al. Design materials based on simulation results of silicon induced segregation at AlSi10Mg interface fabricated by selective laser melting[J]. Journal of Materials Science & Technology, 2020, 46: 145-155.
    [29]
    FITE J, ESWARAPPA PRAMEELA S, SLOTWIN-SKI J A, et al. Evolution of the microstructure and mechanical properties of additively manufactured AlSi10Mg during room temperature holds and low temperature aging[J]. Additive Manufacturing, 2020, 36: 101429.
    [30]
    WU J, WANG X Q, WANG W, et al. Microstructure and strength of selectively laser melted AlSi10Mg[J]. Acta Materialia, 2016, 117: 311-320.
    [31]
    XIAO Y K, BIAN Z Y, WU Y, et al. Effect of nano-TiB2 particles on the anisotropy in an AlSi10Mg alloy processed by selective laser melting[J]. Journal of Alloys and Compounds, 2019, 798: 644-655.
    [32]
    AO M, DONG C F, LI N, et al. Unexpected stress corrosion cracking improvement achieved by recrystallized layer in Al-Zn-Mg alloy[J]. Journal of Materials Engineering and Performance, 2021, 30(8): 6258-6268.
    [33]
    ZHANG S Z, CHEN Z, WEI P, et al. Wear proper-ties of graphene/zirconia biphase nano-reinforced aluminium matrix composites prepared by SLM[J]. Materials Today Communications, 2022, 30: 103009.
    [34]
    AO M, JI Y C, YI P, et al. Relationship between elements migration of α-AlFeMnSi phase and micro-galvanic corrosion sensitivity of Al-Zn-Mg alloy[J]. International Journal of Minerals, Metallurgy and Materials, 2023, 30(1): 112-121.
    [35]
    LI N, DONG C F, MAN C, et al. Insight into the localized strain effect on micro-galvanic corrosion behavior in AA7075-T6 aluminum alloy[J]. Corrosion Science, 2021, 180: 109174.
    • Related Articles

  • Related Articles

    [1]GONG Hui, XU Chuqi, YAO Jinghuas. Correlation Analysis for Copper Release Rate Test Results of Antifouling Paint in Indoor Simulated and Real Seawater Environment[J]. Development and Application of Materials, 2022, 37(6): 114-118.
    [2]CHEN Leilei, CHEN Shanshan, NIU Yongfeng, LIN Jiancong, YANG Mingliang, LIU Yilong. Research Progress of Marine Antifouling Biocides[J]. Development and Application of Materials, 2021, 36(5): 94-102.
    [3]FENG Xiaofeng, XIA Xiufeng, HE Chunju. Preparation of Antifouling Coatings of Zwitter-ion Nano-silica Particles Inspired by Mussel[J]. Development and Application of Materials, 2018, 33(2): 33-37. DOI: 10.19515/j.cnki.1003-1545.2018.02.005
    [4]LIU Yin-song, LIU Ming-guang, LI Liang, YAN Xin. Antifouling Coatings Based on Acrylate Copolymers Containing Quaternary Ammonium Salt[J]. Development and Application of Materials, 2015, 30(3): 17-20. DOI: 10.19515/j.cnki.1003-1545.2015.03.004
    [5]YE Xian-huai, LI Liang, ZHAO Hua, WANG Hai-rong, ZHANG Ying. Direct Electrolysis-atomic Absorption Spectrometric Method for Determination of Total Copper in Antifouling Paints[J]. Development and Application of Materials, 2015, 30(2): 79-81. DOI: 10.19515/j.cnki.1003-1545.2015.02.017
    [6]ZHANG Xiao, CHEN Xi-guang, DUAN Dong-xia, LIN Cun-guo. Antifouling Activities of Metabolic Product Produced by Marine Bacteria[J]. Development and Application of Materials, 2013, 28(4): 26-31. DOI: 10.19515/j.cnki.1003-1545.2013.04.007
    [7]ZHANG Jin-wei, LIN Cun-guo, XU Feng-ling, WANG Li, DUAN Dong-xia, ZHENG Ji-yong, ZHOU Juan. Protein Resistance Materials and Its Application Prospect in Marine Antifouling Materials[J]. Development and Application of Materials, 2013, 28(3): 123-126. DOI: 10.19515/j.cnki.1003-1545.2013.03.027
    [8]XU Feng-ling, LIN Cun-guo, YU Hong-xian, ZHENG Ji-yong. The Study of Controlled Release of Marine Antifoulant[J]. Development and Application of Materials, 2013, 28(3): 119-122. DOI: 10.19515/j.cnki.1003-1545.2013.03.026
    [9]LUO Zheng-hong, HONG Shun-li, HE Teng-yun. Formulation Design of Low Surface Energy Marine Antifouling Coatings[J]. Development and Application of Materials, 2006, 21(6): 33-35. DOI: 10.19515/j.cnki.1003-1545.2006.06.010
    [10]Zhao Xiaoyan. The Research Progress of the Marine Natural Product Antifoulants[J]. Development and Application of Materials, 2001, 16(4): 34-37. DOI: 10.19515/j.cnki.1003-1545.2001.04.010

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (122) PDF downloads (24) Cited by()
    Related

    Copyright © 《Development and Application of Materials》豫ICP备13020589号-2

    Adress: No.169, Binhe South Road, Luolong District, Luoyang City, Henan Province，China  Tel: (0379)67256265;  (0379)67256345  Email: TG023@163.com

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return