LI Bo, WU Jian-hua, CHEN Kai-feng, YE Zhang-ji. Preparation of Waterborne Epoxy Curing Agent and Its Effect on Properties of Film[J]. Development and Application of Materials, 2015, 30(3): 21-26. DOI: 10.19515/j.cnki.1003-1545.2015.03.005
Citation: LI Bo, WU Jian-hua, CHEN Kai-feng, YE Zhang-ji. Preparation of Waterborne Epoxy Curing Agent and Its Effect on Properties of Film[J]. Development and Application of Materials, 2015, 30(3): 21-26. DOI: 10.19515/j.cnki.1003-1545.2015.03.005

Preparation of Waterborne Epoxy Curing Agent and Its Effect on Properties of Film

More Information
  • Received Date: March 19, 2015
  • Available Online: March 18, 2024
  • The modified polyaspartic acid-amine-epoxy comb polymer was prepared from graft modification of the epoxy E-44 modified triethylenetetramine adduct onto modified polyaspartic acid, which was then mixed with the epoxy-amine adduct and terminated with butyl glycidyl ether partially, finally emulsified to be nonionic waterborne epoxy curing agent.Effect of different graft rate, graft percent of total adduct and the proportion of terminated primary amine on the properties of the agent and the film were studied, the properties of the self-synthesized agent were compared with that of commercial waterborne curing agents.Consequently, when the graft rate of amine adduct was 20% and the percent of terminated primary amine of 10% grafted P1 of the curing agent was 25%, the stability of the agent is well, the flexibility and impact resistance of the curing epoxy film were largely improved compared with other waterbone curing agents on sale.
  • Related Articles

    [1]WU Jixiang, JIANG Peng, AN Feipeng. Research Progress and Prospect of Cold Cracking Sensitivity Evaluation of Welded Joints of Titanium Alloys[J]. Development and Application of Materials, 2021, 36(5): 76-82,102.
    [2]TAO Huifa, LI Bobo, LIU Yinqi. Analysis on Cracks in Cold Rolled Titanium Coil[J]. Development and Application of Materials, 2020, 35(1): 10-13.
    [3]MENG Fanming. Research Progress on Welding Cold Crack of Hull Structural Steel[J]. Development and Application of Materials, 2019, 34(6): 57-63. DOI: 10.19515/j.cnki.1003-1545.2019.06.012
    [4]CHENG Yingjin, LIU Haitao, DU Yi, YANG Shu, ZHENG Wenjian, DAI Xuejia. Analysis of 10Ni8CrMoV Steel Welding Cold Cracking Susceptibility on the Basis of Implant Test[J]. Development and Application of Materials, 2016, 31(5): 13-18. DOI: 10.19515/j.cnki.1003-1545.2016.05.004
    [5]WAN Songlin, WU Songlin. Numerical Simulation Analysis for the Welding Residual Stress of Low Strength Match Butt Joints[J]. Development and Application of Materials, 2015, 30(1): 33-37. DOI: 10.19515/j.cnki.1003-1545.2015.01.007
    [6]ZHOU Hong-bing, WU Song-lin, WANG Ren-fu, XUE Gang. Study on the Cold Cracking Sensibility of SH01 Electrode for Marine High Strength Steel[J]. Development and Application of Materials, 2014, 29(6): 34-37. DOI: 10.19515/j.cnki.1003-1545.2014.06.006
    [7]ZHANG Jing-hai, FANG Da-peng. Practicability Research on Low-match Weld Joint of High-Strength Steel[J]. Development and Application of Materials, 2012, 27(3): 1-6. DOI: 10.19515/j.cnki.1003-1545.2012.03.001
    [8]YAN Pei-jun, ZHANG Tian-hui, XU Ren-ping. Cold Crack Property Analysis of Steel WEL-TEN 62CF[J]. Development and Application of Materials, 2009, 24(4): 55-58. DOI: 10.19515/j.cnki.1003-1545.2009.04.014
    [9]WANG Xiao-hua, XIN Bao, SA Shi-yong, WU Lun-fa. Experimental Investigation on Cold Crack Sensibility of 321-Q370q Clad Plates[J]. Development and Application of Materials, 2008, 23(6): 54-57. DOI: 10.19515/j.cnki.1003-1545.2008.06.015
    [10]NIU Jing, DONG Jun-ming, HE Yuan, DONG Wei-peng, XUE Jin. Cold Cracking Sensitivity of Superhigh Strength Steel 30CrMnSiNi2A[J]. Development and Application of Materials, 2006, 21(4): 1-3. DOI: 10.19515/j.cnki.1003-1545.2006.04.001

Catalog

    Article Metrics

    Article views (20) PDF downloads (1) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return