DING Zhenbin, WANG Xian. Analysis on Weld Pit by 705-ch Flux[J]. Development and Application of Materials, 2018, 33(3): 16-20. DOI: 10.19515/j.cnki.1003-1545.2018.03.003
Citation: DING Zhenbin, WANG Xian. Analysis on Weld Pit by 705-ch Flux[J]. Development and Application of Materials, 2018, 33(3): 16-20. DOI: 10.19515/j.cnki.1003-1545.2018.03.003

Analysis on Weld Pit by 705-ch Flux

More Information
  • Received Date: March 29, 2018
  • Available Online: March 17, 2024
  • The cause of weld pit by a certain batch of 705-ch fused flux was analyzed, and inclusions in different fluxes and microstructures and mechanical properties of deposited metal from different fluxes were investigated. The results show that the CO2 produced by the decomposition of the marble particles mixed in the flux under the heat of welding is the cause of the formation of the weld pit.
  • Related Articles

    [1]WANG Xiaolian, WANG Qingyun, WANG Yabin. Developing of Flux of Stainless Steel Containing Nb or Ti for Wire Electrode Submerged Arc Welding[J]. Development and Application of Materials, 2019, 34(6): 70-73. DOI: 10.19515/j.cnki.1003-1545.2019.06.014
    [2]WANG Qingyun, MA Mingliang, KANG Tianyou, SUN Zhenzhen. Development of Seamless Flux Cored Submerged Arc Welding Wire for High Strength Steel With Yield Strength Grade of 690 MPa[J]. Development and Application of Materials, 2019, 34(6): 64-69. DOI: 10.19515/j.cnki.1003-1545.2019.06.013
    [3]WANG Xiaolian, WANG Qingyun. Affect of Agglomerated Flux's SiO2 Content on Slag Removal Performance of Submerged Arc Welding of Stainless Steel Containing Ti and Nb[J]. Development and Application of Materials, 2018, 33(5): 33-36. DOI: 10.19515/j.cnki.1003-1545.2018.05.006
    [4]YIN Yayun, LEI Xiaowei, CHEN Liyang, QI Fenghua, LI Peng. Microstructures and Mechanical Properties of TA2 Plate Joint Welded by Key Hole TIG[J]. Development and Application of Materials, 2018, 33(4): 76-80. DOI: 10.19515/j.cnki.1003-1545.2018.04.014
    [5]MEI Wenjia, LEI Xiaowei, GUO Xiaohui, REN Guanpeng, XU Jialei. The Development and Prospect of Inner-hole Welding[J]. Development and Application of Materials, 2017, 32(2): 100-104. DOI: 10.19515/j.cnki.1003-1545.2017.02.019
    [6]XUE Xu-bin, WANG Qing-yun, FAN Hui-qing. Effect of Marble Granularity in the E5015 Coating on the Chemical Composition and Mechanical Properties of Deposited Metal[J]. Development and Application of Materials, 2014, 29(5): 7-9. DOI: 10.19515/j.cnki.1003-1545.2014.05.002
    [7]WANG Xiao-lian, MA Ming-liang, WANG Qing-yun. Development of a Agglomerated Flux for Stainless Steel Submerged Arc Welding[J]. Development and Application of Materials, 2012, 27(1): 21-24. DOI: 10.19515/j.cnki.1003-1545.2012.01.005
    [8]KONG Hong-yu. Influence of Mn/Si on Microstructure and Toughness of High Strength Steel SAW Deposited Metals[J]. Development and Application of Materials, 2007, 22(6): 1-4. DOI: 10.19515/j.cnki.1003-1545.2007.06.001
    [9]WANG Jun-min, WANG Ming-lin. Influence of C,Cu and Cr on the Mechanical Property of SAW 10CrNiCu Steel Welds[J]. Development and Application of Materials, 2006, 21(6): 1-3. DOI: 10.19515/j.cnki.1003-1545.2006.06.001
    [10]Zhang Jinghai, Lu Xiaosheng, Yu Wei. Research on GTAW Flux Used for 304 Stainless Steel Welding[J]. Development and Application of Materials, 2000, 15(6): 1-4. DOI: 10.19515/j.cnki.1003-1545.2000.06.001

Catalog

    Article Metrics

    Article views (22) PDF downloads (2) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return