ZHENG Fei, LIU Yu, WANG Lingshui, DONG Zhixiang, LIU Xin, LU Yubin. Effect of Vibration on Fatigue Performance of Bellows under Working Conditions[J]. Development and Application of Materials, 2023, 38(1): 48-54.
Citation: ZHENG Fei, LIU Yu, WANG Lingshui, DONG Zhixiang, LIU Xin, LU Yubin. Effect of Vibration on Fatigue Performance of Bellows under Working Conditions[J]. Development and Application of Materials, 2023, 38(1): 48-54.

Effect of Vibration on Fatigue Performance of Bellows under Working Conditions

More Information
  • Received Date: May 29, 2022
  • Available Online: March 10, 2023
  • Here is studied the influence of system vibration on the fatigue performance of bellows for thermal networks under working conditions like working stress, working medium and working temperature. The failure of the bellows is analyzed by means of microstucture analysis, hardness analysis and SEM. The results show that the fatigue crack of the bellows initiates from the inner and outer surfaces, and when it expands to near the tip of the crack along the direction to the center of the material, the below fractures instantly. The joint fracture shows ductile morphology. Under the working condition, the vibration has a certain effect on eliminating the residual stress of the bellows, and can significantly improve the fatigue properties of the bellows.
  • [1]
    魏翔云,敬和民,郑玉贵,等.热力管线中不锈钢波纹管破裂原因分析[J].腐蚀科学与防护技术, 2002, 14(6):365-367.
    [2]
    杨帆,孙智,马景涛,等.供热管道波纹管补偿器的腐蚀失效[J].煤气与热力, 2005, 25(6):13-16.
    [3]
    于雅泽,李晓恭.基于ANSYS的供热管道系统振动分析及改造[J].煤气与热力, 2011, 31(9):12-14.
    [4]
    王乐勤,何秋良.管道系统振动分析与工程应用[J].流体机械, 2002, 30(10):28-31.
    [5]
    刘晓丹,陶兴华,韩振强.振动时效工艺在消除膨胀波纹管残余应力中的应用[J].振动与冲击, 2015, 34(4):171-174.
    [6]
    顾邦平,胡雄,徐冠华,等.基于位错密度演化的高频振动时效微观机理[J].稀有金属材料与工程, 2018, 47(8):2477-2482.
    [7]
    沈国鉴,李敏,薛新.金属波纹管流固耦合动态特性分析与试验研究[J].兵器材料科学与工程, 2020, 43(5):36-42.
    [8]
    罗宏瀚.输流波纹管流固耦合振动的初步研究[J].振动与冲击, 2008, 27(11):149-153.
  • Related Articles

    [1]FAN Zhenyong, BAI Jingyu, WU Zhixin, GUO Xuzhen. Research on Microstructure and Properties of New Stainless Steel for Desulfurization Pump Impeller[J]. Development and Application of Materials, 2019, 34(6): 6-9. DOI: 10.19515/j.cnki.1003-1545.2019.06.002
    [2]XU Xi-jun, QI Feng-hua, LIU Jun, GAO Rui, LEI Xiao-wei. Research of 316L Stainless Steel Plasma Welding Technology[J]. Development and Application of Materials, 2013, 28(2): 23-25. DOI: 10.19515/j.cnki.1003-1545.2013.02.005
    [3]ZHA Xiao-qin, SHAO Jun, ZHANG Li-juan. Review on Intergranular Corrosion Testing Methods of Stainless Steels[J]. Development and Application of Materials, 2009, 24(3): 60-65. DOI: 10.19515/j.cnki.1003-1545.2009.03.016
    [4]ZHANG Hao, DONG Fei, CHEN Ji-zhi. Research Progress on Duples Stainless Steel[J]. Development and Application of Materials, 2008, 23(2): 57-60. DOI: 10.19515/j.cnki.1003-1545.2008.02.016
    [5]HA Sheng-nan, REN Song-zan, XIE Chun-sheng, CHEN De-hua, MA Chun-xia. Failure Analysis of Stainless Steel Wire of 200 Series[J]. Development and Application of Materials, 2008, 23(1): 51-54,65. DOI: 10.19515/j.cnki.1003-1545.2008.01.013
    [6]ZHAO Rong-da, WANG Xiao-li, ZHANG Wei-qiang, ZHU Hong-fei. Influence of Cu on Properties of Low Carbon Antibacterical Martensite Stainless Steel[J]. Development and Application of Materials, 2006, 21(5): 14-16. DOI: 10.19515/j.cnki.1003-1545.2006.05.005
    [7]ZHAO Jin-gang, ZHANG Bao-wei, WANG Ming-lin. Development of High Strength Austenitic Stainless Steel[J]. Development and Application of Materials, 2005, 20(4): 38-40. DOI: 10.19515/j.cnki.1003-1545.2005.04.012
    [8]Li Biaofeng, Yu Wei, Yu Chaolin, Zheng Xiaojun, Yan Guoqiang. Welding of 0Cr16Ni5Mo Stainless Steel Submarine Derrick[J]. Development and Application of Materials, 2003, 18(5): 25-27,38. DOI: 10.19515/j.cnki.1003-1545.2003.05.007
    [9]Fang Zhengchun. Development of the Stainless Steel of Marine Propeller[J]. Development and Application of Materials, 2002, 17(6): 43-46. DOI: 10.19515/j.cnki.1003-1545.2002.06.012
    [10]Zhang Jinghai, Lu Xiaosheng, Yu Wei. Research on GTAW Flux Used for 304 Stainless Steel Welding[J]. Development and Application of Materials, 2000, 15(6): 1-4. DOI: 10.19515/j.cnki.1003-1545.2000.06.001

Catalog

    Article Metrics

    Article views (173) PDF downloads (23) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return