Volume 38 Issue 5
Oct.  2023
Turn off MathJax
Article Contents
Abstract
References
Related Articles
ZHOU Nanyang, HE Liang, CHENG Bin, DU Yi. Research Progress in Improving Mechanical Properties of Welded Joints by Ultrasonic Impact Treatment[J]. Development and Application of Materials, 2023, 38(5): 94-98.
Citation: ZHOU Nanyang, HE Liang, CHENG Bin, DU Yi. Research Progress in Improving Mechanical Properties of Welded Joints by Ultrasonic Impact Treatment[J]. Development and Application of Materials, 2023, 38(5): 94-98.
shu

Research Progress in Improving Mechanical Properties of Welded Joints by Ultrasonic Impact Treatment

  • 1. Jiangnan Shipyard (Group) Co., Ltd., Shanghai 20000, China;

  • 2. Luoyang Ship Material Research Institute, Luoyang 471023, China

More Information
  • Received Date: December 09, 2022
  • Available Online: November 06, 2023
    Graphical Abstract
    • Abstract
  • Structural failure of welded joints due to high residual stress is a common technical problem in welded structures. For ultrasonic impact treatment can effectively improve the mechanical properties of welded joints, it has been widely used in various fields. In this study, we focus on the research of ultrasonic impact technology in reducing residual stresses and improving fatigue properties of welded joints, as well as the latest related research and application of the ultrasonic impact technology with welding.
    • FullText(HTML)
    • References (29)
  • [1]
    葛明兰, 鲁家晟. 焊接残余应力对焊接结构的影响[J]. 福建建筑, 2010(7): 50-52.
    [2]
    孙乃明. 焊接残余应力对焊接结构的影响[J]. 装备制造技术, 2013(3): 138-139.
    [3]
    王文先, 王东坡, 齐芳娟. 焊接结构[M]. 北京: 化学工业出版社, 2012.
    [4]
    宋天民. 焊接残余应力的产生与消除[M]. 北京: 中国石化出版社, 2005.
    [5]
    季鹏, 季鹤. 钢结构焊接残余应力及焊接变形控制研究[J]. 世界有色金属, 2017(3): 191.
    [6]
    杨延功, 焦启林. 消除焊接残余应力的四种方法[J]. 工程机械与维修, 2009(9): 172-173.
    [7]
    ZHU Y L. Progresses on research and application of metal ultrasonic surface enhancement technologies[J]. Journal of Mechanical Engineering, 2014, 50(20): 35.
    [8]
    STATNIKOV E S, MUKTEPAVEL V O, BLOMQ-VIST A. Comparison of ultrasonic impact treatment (UIT) and other fatigue life improvement methods[J]. Welding in the World, 2002, 46(3): 20-32.
    [9]
    YIN D Q, WANG D P, JING H Y, et al. The effects of ultrasonic peening treatment on the ultra-long life fatigue behavior of welded joints[J]. Materials & Design, 2010, 31(7): 3299-3307.
    [10]
    YANG X J, LING X, ZHOU J X. Optimization of the fatigue resistance of AISI304 stainless steel by ultrasonic impact treatment[J]. International Journal of Fatigue, 2014, 61: 28-38.
    [11]
    胡章咏, 晏嘉陵, 刘川, 等. 超声冲击处理对不同强度等级钢焊接残余应力的影响[J]. 应用力学学报, 2021, 38(2): 730-737.
    [12]
    饶德林, 陈立功, 倪纯珍, 等. 超声冲击对焊接结构残余应力的影响[J]. 焊接学报, 2005, 26(4): 48-50.
    [13]
    马国, 张立平, 刘夕, 等. 超声冲击处理工艺对Q345焊接热影响区残余应力的影响[J]. 表面技术, 2017, 46(7): 208-212.
    [14]
    黄丽婷, 陈明和, 谢兰生, 等. 超声冲击载荷对CP3钛合金焊接接头残余应力的影响[J]. 航空材料学报, 2014, 34(1): 52-55.
    [15]
    陈佳伟. 超声波冲击处理消除16MnR焊件残余应力的研究[D]. 长春: 吉林大学, 2010. 2010: 62.
    [16]
    牛亚如. 超声冲击改善焊接接头疲劳性能的数值分析[D]. 天津: 天津大学, 2018.
    [17]
    王东坡, 周达. 超声冲击法提高焊接接头疲劳强度的机理分析[J]. 天津大学学报, 2007, 40(5): 623-628.
    [18]
    TEHRANI YEKTA R, GHAHREMANI K, WALBR-IDGE S. Effect of quality control parameter variations on the fatigue performance of ultrasonic impact treated welds[J]. International Journal of Fatigue, 2013, 55: 245-256.
    [19]
    白易立, 王东坡, 邓彩艳, 等. 超声冲击强度对焊接接头疲劳寿命的影响[J]. 焊接学报, 2019, 40(12): 149-153.
    [20]
    邓彩艳, 刘夕, 王东坡. 高温超声冲击处理Q345钢焊接接头的疲劳性能[J]. 焊接学报, 2014, 35(11): 47-50.
    [21]
    徐艳. 高温条件下超声冲击处理Q345钢焊接接头疲劳行为研究[D]. 天津: 天津大学, 2012.
    [22]
    邓彩艳, 牛亚如, 龚宝明, 等. 承载超声冲击下焊接接头疲劳性能的改善[J]. 焊接学报, 2017, 38(7): 72-76.
    [23]
    薛钢. 表面压应力对10Ni5CrMoV钢疲劳性能的影响[J]. 材料开发与应用, 2009, 24(2): 1-3.
    [24]
    赵维. 实时超声冲击消减焊接残余应力及变形的实验和仿真研究[D]. 哈尔滨: 哈尔滨工业大学, 2017.
    [25]
    马冉. 随焊超声冲击消除焊接残余应力的有限元分析[D]. 济南: 山东大学, 2015.
    [26]
    李栋. 正面随焊超声冲击对焊接残余应力与变形的影响[D]. 济南: 山东大学, 2017.
    [27]
    贺文雄, 肖昌辉, 史菲, 等. 实时超声冲击消减焊接残余应力[J]. 焊接学报, 2015, 36(8): 84-87.
    [28]
    肖昌辉. 实时超声冲击消除焊接残余应力和变形的研究[D]. 哈尔滨: 哈尔滨工业大学, 2013.
    [29]
    李思昊. 实时超声冲击对焊接应力变形及接头组织性能的影响[D]. 哈尔滨: 哈尔滨工业大学, 2014.
    • Related Articles

  • Related Articles

    [1]WANG Dongtao, LIU Jintao, LI Jun, REN Jiangyi. Welding Test of Marine Aluminum Alloy-titanium-stainless Steel Composite Transition Joint[J]. Development and Application of Materials, 2019, 34(6): 74-78. DOI: 10.19515/j.cnki.1003-1545.2019.06.015
    [2]ZHANG Xianfeng. Influence of Test Methods on Interface Combining Strength Test Results of Al/Q235A Explosive Clad Plate[J]. Development and Application of Materials, 2018, 33(6): 42-45. DOI: 10.19515/j.cnki.1003-1545.2018.06.008
    [3]WANG Liying, HAN Shurong, ZHANG Lei, WANG Bei, MA Weihui. Ultrasonic Testing Evaluation on Bonding Strength of Explosive Welded Titanium Steel Clad Plate[J]. Development and Application of Materials, 2017, 32(4): 68-73. DOI: 10.19515/j.cnki.1003-1545.2017.04.011
    [4]XUE Zhiguo, HUANG Xingli, GAO Baoli. Technology Research on the Large Area Cu/Steel Clad Plate with Explosive Welding[J]. Development and Application of Materials, 2016, 31(1): 41-44. DOI: 10.19515/j.cnki.1003-1545.2016.01.010
    [5]ZHAO Bin, WANG Bin-bin, WANG Xiao-hua. Study on the Plasma Arc Welding Process of Alloy 20 Stainless Steel Plate[J]. Development and Application of Materials, 2015, 30(5): 31-34. DOI: 10.19515/j.cnki.1003-1545.2015.05.006
    [6]XU Xi-jun, QI Feng-hua, LIU Jun, GAO Rui, LEI Xiao-wei. Research of 316L Stainless Steel Plasma Welding Technology[J]. Development and Application of Materials, 2013, 28(2): 23-25. DOI: 10.19515/j.cnki.1003-1545.2013.02.005
    [7]DENG Guang-ping, HOU Fa-chen, XU Yu-hao, LI Jun. Study of Lead（Pb1）+ Steel（Q245R） Clad Plate by Explosive Welding[J]. Development and Application of Materials, 2012, 27(4): 16-20. DOI: 10.19515/j.cnki.1003-1545.2012.04.005
    [8]WANG Xiao-hua, ZHANG Chao. Welding Test of Duplex Stainless Steel 2205-Q345R Clad Metal Plate[J]. Development and Application of Materials, 2012, 27(1): 15-20. DOI: 10.19515/j.cnki.1003-1545.2012.01.004
    [9]WANG Xiao-hua, SA Shi-yong, HOU Fa-chen, ZHANG Yi-tao. Experimental Investigation of Weld on 321-Q370q Clad Plates[J]. Development and Application of Materials, 2009, 24(2): 42-47. DOI: 10.19515/j.cnki.1003-1545.2009.02.011
    [10]ZHAO Zheng, TAO Gang. Explosive Compaction-Spray Technology for Preparation of Double Metal Clad Plate[J]. Development and Application of Materials, 2008, 23(5): 48-51. DOI: 10.19515/j.cnki.1003-1545.2008.05.011

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (158) PDF downloads (25) Cited by()
    Related

    Copyright © 《Development and Application of Materials》豫ICP备13020589号-2

    Adress: No.169, Binhe South Road, Luolong District, Luoyang City, Henan Province，China  Tel: (0379)67256265;  (0379)67256345  Email: TG023@163.com

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return