WANG Yueping, YANG Dongjie, MA Zhichao, PENG Xinling, HUANG Dongya, ZHENG Jingdong. Study on and Preparation of Full Ocean Depth Buoyancy Materials[J]. Development and Application of Materials, 2021, 36(4): 57-61.
Citation: WANG Yueping, YANG Dongjie, MA Zhichao, PENG Xinling, HUANG Dongya, ZHENG Jingdong. Study on and Preparation of Full Ocean Depth Buoyancy Materials[J]. Development and Application of Materials, 2021, 36(4): 57-61.

Study on and Preparation of Full Ocean Depth Buoyancy Materials

More Information
  • Received Date: December 07, 2020
  • Full ocean depth buoyancy materials were prepared with glycidyl ether type epoxy resin, aromatic polyamine hardener and hollow glass bubbles. Here were investigated the influences of the volume fraction of hollow glass bubbles K1 on such performances as density, compressive strength, resistance to hydrostatic pressure and water absorption rate. The results showed that when the total volume fraction of the hollow glass bubbles in the full ocean depth buoyancy material was 66.7%, the introduction of appropriate amount of hollow glass bubbles K1 instead of HM42 could reduce the density of full ocean depth buoyancy material, the compressive strength was not less than 132 MPa, the resistance to hydrostatic pressure was not less than 150 MPa, and the water absorption rate was not higher than 0.2%. It's prospective to meet the safe usage of full ocean depth equipments.
  • [1]
    BOWEN A D,YOERGER D R,TAYLOR C,et al.The Nereus hybrid underwater robotic vehicle for global ocean science operations to 11,000m depth[C]//OCEANS 2008.Quebec City,QC,Canada.IEEE,2008:1-10.
    [2]
    徐伟哲,张庆勇.全海深潜水器的技术现状和发展综述[J].中国造船,2016,57(2):206-221.
    [3]
    CUI W C.An overview of submersible research and development in China[J].船舶与海洋工程学报(英文版).2018,17(4):459-470.
    [4]
    CUI W C,GUO J,PAN B B.A preliminary study on the buoyancy materials for the use in full ocean depth manned submersibles[J].船舶力学,2018,22(6):736-757.
    [5]
    何成贵,张培志,郭方全,等.全海深浮力材料发展综述[J].机械工程材料,2017,41(9):14-18.
    [6]
    梁小杰,梁忠旭,周媛,等.全海深浮力材料性能分析[J].热固性树脂,2016,31(5):38-41.
    [7]
    王华文,彭塞奥,彭小波.全海深浮力材料用空心玻璃微珠的制备方法[J].建材世界,2018,39(6):1-5.
    [8]
    刘坤,王金,杜志元,等.大深度载人潜水器浮力材料的应用现状和发展趋势[J].海洋开发与管理,2019,36(12):68-71.
    [9]
    王平,严开祺,潘顺龙,等.深水固体浮力材料研究进展[J].工程研究-跨学科视野中的工程,2016,8(2):223-229.
    [10]
    吴则华,陈先,梁忠旭,等.室温固化型高强度固体浮力材料[J].高科技与产业化,2008(12):48-50.
    [11]
    马志超,郑劲东,徐姗姗,等.空心玻璃微珠对固体浮力材料性能的影响[J].材料开发与应用,2020,35(3):62-66.
    [12]
    李仙会,张兆峰,柯贤朝,等.深水固体浮力材料的性能[J].工程塑料应用,2019,47(4):19-23.
    [13]
    马浩轩.AG-80环氧树脂基固体浮力材料的研究[D].北京:北京理工大学,2017.
    [14]
    潘顺龙,张敬杰,宋广智.深潜用空心玻璃微珠和固体浮力材料的研制及其研究现状[J].热带海洋学报,2009,28(4):17-21.
    [15]
    刘文栋,戴金辉,吴平伟,等.混合空心玻璃微珠制备固体浮力材料及性能研究[J].材料开发与应用,2014,29(3):31-36.
    [16]
    刘艳,刘文智,马春霞.深水固体浮力材料的制备及性能研究[J].舰船科学技术,2017,39(5):87-90.
    [17]
    周金磊,戴金辉,吴平伟,等.环氧树脂基固体浮力材料的制备及性能研究[J].材料开发与应用,2013,28(2):59-65.
  • Related Articles

    [1]CHEN Jiayi, CAO Yaying, HU Zhongbo, CHEN Zhi. Study on ZnO-based Ammonia Gas Sensor under the Action of Reference Material[J]. Development and Application of Materials, 2022, 37(5): 103-108.
    [2]SONG Da, WANG Licong, WANG Zejiang, LU Shaoyan, HUANG Xiping. Influence of Calcination Temperature on Preparation of High Purity Mg O Produced From Brine and Industrial Ammonia Gas[J]. Development and Application of Materials, 2018, 33(1): 83-87,104. DOI: 10.19515/j.cnki.1003-1545.2018.01.014
    [3]CHEN Xiaomin. Oxidation Mechanism of a Zr-based Bulk Metallic Glass[J]. Development and Application of Materials, 2016, 31(2): 32-36. DOI: 10.19515/j.cnki.1003-1545.2016.02.007
    [4]WU Hai-hong, LU Shao-yan, WANG Li-cong, GAO Chun-juan, LUO Bi-jun, ZHANG Qi. Research Progress of Basic Magnesium Chloride Whisker[J]. Development and Application of Materials, 2014, 29(1): 94-98,108. DOI: 10.19515/j.cnki.1003-1545.2014.01.021
    [5]HUANG Xiang, WANG Xiao-peng, WANG Tong-kun, SHANG Qing-hao, ZHANG Xiang-han, ZHANG Xiao. Green Synthesis of Aluminum Nitride Superfine Powder[J]. Development and Application of Materials, 2014, 29(1): 45-49. DOI: 10.19515/j.cnki.1003-1545.2014.01.011
    [6]WANG Tong-kun, HUANG Xiang, ZHEN Guan-sheng. High Temperature Phase Transformation of Lanthanum Oxide Doped Alumina[J]. Development and Application of Materials, 2013, 28(3): 88-93. DOI: 10.19515/j.cnki.1003-1545.2013.03.020
    [7]SHI Xu-zhong, CHEN Pai-ming, WANG Yue, YU Xiang-fei. The Insulation Properties of Anodic Oxidation and Microarc Oxidation Films on 5A06 Aluminum Alloy[J]. Development and Application of Materials, 2012, 27(1): 51-55. DOI: 10.19515/j.cnki.1003-1545.2012.01.013
    [8]JI Li, ZHANG Tian-you, ZHANG Dong. Influence of Ultrasonic Frequencies and Modes on Exfoliation of Graphite Oxide[J]. Development and Application of Materials, 2011, 26(1): 42-44,55. DOI: 10.19515/j.cnki.1003-1545.2011.01.012
    [9]MOU Ying-ju, LIU Wei-juan, LIU Gang, WANG Ya-ming. Present Status and Preparation Technologys of Iron Oxide Nanoparticles[J]. Development and Application of Materials, 2009, 24(2): 71-76. DOI: 10.19515/j.cnki.1003-1545.2009.02.018
    [10]LIU Hui, SONG Hong-nian. Effect of Electrolyte Concentration on Electrolyte Failure in Magnesium Alloy Micro-arc Oxidization[J]. Development and Application of Materials, 2007, 22(4): 15-17. DOI: 10.19515/j.cnki.1003-1545.2007.04.005

Catalog

    Article Metrics

    Article views (210) PDF downloads (22) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return