Volume 17 Issue 5
Jun.  2024
Turn off MathJax
Article Contents
Abstract
Related Articles
Wei Zhanjiang. Weldability of High Strength Low Alloy 10CrNi3MoV(L) Steel[J]. Development and Application of Materials, 2002, 17(5): 17-22. DOI: 10.19515/j.cnki.1003-1545.2002.05.006
Citation: Wei Zhanjiang. Weldability of High Strength Low Alloy 10CrNi3MoV(L) Steel[J]. Development and Application of Materials, 2002, 17(5): 17-22. DOI: 10.19515/j.cnki.1003-1545.2002.05.006
shu

Weldability of High Strength Low Alloy 10CrNi3MoV(L) Steel

  • Luoyang Ship Material Research Institute, Luoyang 471039, China

More Information
  • Received Date: February 25, 2002
  • Available Online: June 14, 2024
    Graphical Abstract
    • Abstract
  • Weldability of high strength low alloy steel plate of continuously cast 10CrNi3MoV with different carbon-content is investigated adopting strength-matching wire 10MnNi2MoTi and fused flux 705-ch in different welding heat input and temperature.The welding joint exhibits good mechanical properties and fabrication weldability, but the toughness of the joint decreases in high heat input (～40kJ/cm). To improve the HAZ toughness, the heat input should be controlled no higher than 40kJ/cm and the carbon content of 10CrNi3MoV steel should be controlled within a narrow range for the sake of the toughness of 10CrNi3MoV steel plate.
    • FullText(HTML)
    • References (0)
    • Related Articles

  • Related Articles

    [1]ZHENG Zhendan, ZHANG Shuaifeng, WU Shaojie, GONG Baoming, DENG Caiyan, CHENG Fangjie. Research Advancement on Welding Process of Thick-Walled Titanium Alloy Components[J]. Development and Application of Materials, 2024, 39(6): 24-34.
    [2]XU Lujie, CHEN Yuhu, ZHANG Ling, HUANG Ming, ZHAI Menglei, CHEN Wenguang. Simulation and Experimental Study on Injection Molding Vulcanization of Porous Rubber Products[J]. Development and Application of Materials, 2023, 38(6): 92-99,110.
    [3]ZHOU Tiezhu, MA Yanxia, JIANG Peng, ZHANG Zhiyuan, YANG Qingyun, YANG Shengli. Influencing Factors and Parameters Optimization of Cold Push-bending for Copper Alloy Elbow[J]. Development and Application of Materials, 2018, 33(2): 38-46. DOI: 10.19515/j.cnki.1003-1545.2018.02.006
    [4]XUE Gang, GONG Xuhui. Factors Influencing Crack Arrest Toughness Kca of High Strength Thick Plate[J]. Development and Application of Materials, 2018, 33(1): 1-6. DOI: 10.19515/j.cnki.1003-1545.2018.01.001
    [5]GONG Xuhui, XUE Gang, LI Chong, GAO Zhenpeng. Primary Experimental Validation of Crack Arrest Toughness Index Value for High Strength Thick Plates of Container Ship[J]. Development and Application of Materials, 2017, 32(6): 4-7. DOI: 10.19515/j.cnki.1003-1545.2017.06.002
    [6]AN Feipeng, XIONG Jinhui, LI Shikai, YAN Yangyang. Study of Microstructure and Mechanical Properties of Electron Beam Welded Thick-wall Ti80 Joint[J]. Development and Application of Materials, 2017, 32(1): 62-66. DOI: 10.19515/j.cnki.1003-1545.2017.01.012
    [7]ZHANG Lijuan, ZHENG Guohua, ZHAO Yang. Uncertainty Evaluation of Fracture Toughness Critical CTOD Value for Metallic Materials[J]. Development and Application of Materials, 2016, 31(4): 36-41. DOI: 10.19515/j.cnki.1003-1545.2016.04.007
    [8]CHEN Ai-zhi, PENG Ji-xiang, XU Jia-long, YANG Shu. The Influence of Composition Segregation on the Properties in Thickness Direction of 10NiCrCu Steel Produced by Continuous Casting[J]. Development and Application of Materials, 2014, 29(4): 34-39. DOI: 10.19515/j.cnki.1003-1545.2014.04.008
    [9]CUI Li, QU Zhan-yuan, YANG Shu. Study on Dehydrogenation Process for High Strength Thick-Wall ZG10MnNiCu Cast Steel[J]. Development and Application of Materials, 2011, 26(3): 12-13,18. DOI: 10.19515/j.cnki.1003-1545.2011.03.004
    [10]MA Yan-hui, ZHANG Tian-hui, LI Hua-ying, XU Ren-ping. Forecasting for Hardness Probability Distribution and Allowable Tensile Strength Value of 35CrMoV Steel[J]. Development and Application of Materials, 2011, 26(3): 8-11. DOI: 10.19515/j.cnki.1003-1545.2011.03.003

  • Cited by

    Periodical cited type(4)

    1. 徐国瑞，郐婧文，代磊阳，杨航，苏程，徐谦. 缓交联高强度封堵剂研究进展. 精细石油化工. 2024(01): 76-78 .
    2. 张振刚. 船舶内装板耐火分隔结构设计与性能分析. 船舶物资与市场. 2024(01): 29-31 .
    3. 雷璞，张锐涛，米垚，黄承，孟雨辰，李洛平. 玻璃纤维增强酚醛树脂基复合材料的耐高温性能研究. 黑龙江科学. 2024(12): 87-89+93 .
    4. 李晨阳，李书欣，冀运东，曹东风，胡海晓，陈震. 聚硅氧烷改性环氧树脂对玻璃纤维/酚醛复合材料高温残余强度的影响. 复合材料学报. 2023(12): 6619-6629 .

    Other cited types(0)

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (19) PDF downloads (0) Cited by(4)
    Related

    Copyright © 《Development and Application of Materials》豫ICP备13020589号-2

    Adress: No.169, Binhe South Road, Luolong District, Luoyang City, Henan Province，China  Tel: (0379)67256265;  (0379)67256345  Email: TG023@163.com

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return