Volume 18 Issue 1
Jun.  2024
Turn off MathJax
Article Contents
Abstract
Related Articles
ZHAO Peifeng, SUN Lemin. Production of BaTiO3 Nanometer Powder[J]. Development and Application of Materials, 2003, 18(1): 39-42. DOI: 10.19515/j.cnki.1003-1545.2003.01.012
Citation: ZHAO Peifeng, SUN Lemin. Production of BaTiO3 Nanometer Powder[J]. Development and Application of Materials, 2003, 18(1): 39-42. DOI: 10.19515/j.cnki.1003-1545.2003.01.012
shu

Production of BaTiO3 Nanometer Powder

  • Material Science and Engineering Department of Luoyang Institute of Technology, Luoyang 471003, China

More Information
  • Received Date: July 20, 2002
  • Available Online: June 14, 2024
    Graphical Abstract
    • Abstract
  • Several synthetic methods and some influence parameters are discussed for the production of BaTiO3 nanometer powder．The advantage and shortcoming of the above methods are compared．The BaTiO3 particles obtained by the sol-gel method exhibits fine particle size and narrow size distribution,and it could be concluded that this approach will have a promised prospect in future industrial application．
    • FullText(HTML)
    • References (0)
    • Related Articles

  • Related Articles

    [1]GUO Haodong, YANG Chaofei, SUN lei, WANG Renfu, ZHANG Yuxiang, HUANG Dong. Mechanical Behavior and its Intrinsic Model of 10CrNi5MoV Steel in Two-phase Region[J]. Development and Application of Materials, 2024, 39(6): 84-89.
    [2]CAO Wenan, YE Fan, SUN Lei, LIU Jian, NIU Jicheng. Effects of Heat Input on Microstructure and Property of MAG Welded Joints of 10CrNi3MoV Steel[J]. Development and Application of Materials, 2023, 38(6): 86-91,110.
    [3]YE Fan, NIU Jicheng, NIE Jianhang, WANG Renfu, DENG Wanping. Research on Heat Treatment Process for Tensile Property Recovery of Cold-Forming 10CrNi5MoV Steel[J]. Development and Application of Materials, 2023, 38(1): 60-65.
    [4]DAI Le, WANG Xian, ZHANG Yanchao, ZHOU Xiaofeng. Effect of Cooling Rate on the Transformation of the Weld Metal of 10CrNi5MoV Steel[J]. Development and Application of Materials, 2022, 37(5): 73-76.
    [5]LI Li, LIU Guoyuan, WANG Pengyun, PENG Hui, WANG Zhuangzhuang, WANG Desheng, CHU Shaoqi. Effect of Groove Type and Interlayer Temperature on Mechanical Properties of Butt Welded Joint of 5083 Spherical Flat Aluminum for Ship[J]. Development and Application of Materials, 2021, 36(5): 72-75.
    [6]WANG Renfu, DENG Wanping, NIU Jicheng. Effect of Plastic Deformation and Stress Relief Heat Treatment on Microstructure and Properties of 10CrNi5MoV Steel Plate[J]. Development and Application of Materials, 2019, 34(5): 16-21,26. DOI: 10.19515/j.cnki.1003-1545.2019.05.004
    [7]DENG Wanping, NIU Jicheng, WANG Renfu. Effect of Stress Relieving Heat Treatment on Microstructure and Properties of 10CrNi5MoV Steel after Plastic Deformation[J]. Development and Application of Materials, 2019, 34(3): 46-51,62. DOI: 10.19515/j.cnki.1003-1545.2019.03.008
    [8]DENG Wan-ping, XUE Gang, WANG Ren-fu. Analysis for the couse of Lower Performance of end Part of 10CrNi5MoV Steel plate[J]. Development and Application of Materials, 2014, 29(4): 29-33. DOI: 10.19515/j.cnki.1003-1545.2014.04.007
    [9]GAO Ling-qing, LI Hui, HOU Shi-zhong. Effects of Strain Rate and Temperature on the Mechanical Properties of 10NiCrMo Hull Steel[J]. Development and Application of Materials, 2013, 28(6): 9-14. DOI: 10.19515/j.cnki.1003-1545.2013.06.003
    [10]SA Shi-yong. Narrow Gap Metal Arc Gas Welding of 10CrNi5MoV Steel Thick Plate[J]. Development and Application of Materials, 2010, 25(1): 13-15. DOI: 10.19515/j.cnki.1003-1545.2010.01.004

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (81) PDF downloads (2) Cited by()
    Related

    Copyright © 《Development and Application of Materials》豫ICP备13020589号-2

    Adress: No.169, Binhe South Road, Luolong District, Luoyang City, Henan Province，China  Tel: (0379)67256265;  (0379)67256345  Email: TG023@163.com

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return