Wang Renfu, Ji Jialong. Experimental Study on Crack Tip Opening Displacement(CTOD) of Continuous Casting 10CrNi3MoV Steel[J]. Development and Application of Materials, 2003, 18(4): 23-26. DOI: 10.19515/j.cnki.1003-1545.2003.04.007
Citation: Wang Renfu, Ji Jialong. Experimental Study on Crack Tip Opening Displacement(CTOD) of Continuous Casting 10CrNi3MoV Steel[J]. Development and Application of Materials, 2003, 18(4): 23-26. DOI: 10.19515/j.cnki.1003-1545.2003.04.007

Experimental Study on Crack Tip Opening Displacement(CTOD) of Continuous Casting 10CrNi3MoV Steel

More Information
  • Received Date: January 17, 2003
  • Available Online: June 14, 2024
  • CTOD test is conducted with die casting and batches of continuous casting 10CrNi3MoV steel plates and the relation between CTOD characteristic value and center line segregation is analyzed. The results show that the resistance of die casting plate to crack forepart propagation is higher than that of continuous casting plates,but to crack unstable extension,the later is no lower than the former and the line segregation will results in CTOD value falling, so the carbon content in continuous casting 10CrNi3MoV steel shall be controlled at a level no more than 0.11% or some other measures shall be adopted to decrease the segregation for good fracture toughness of the steel.
  • Related Articles

    [1]BU Fan, NIE Shuai, LIU Haoxiang, LIU Xudong, HE Yixuan, WANG Jun. Effect of Heat Treatment Assisted with Magnetic Field on Microstructure and Magnetic Properties of Co-Ni-Al Alloy[J]. Development and Application of Materials, 2025, 40(1): 1-12.
    [2]WANG Houqin, GAN Shuhe, WANG Yifan, SONG Qingjun, ZHANG Binggang. Study on Microstructures and Mechanical Properties of 60 mm Thick TC4 ELI Titanium Alloy Welded Joints by Electron Beam Welding[J]. Development and Application of Materials, 2024, 39(6): 35-43,52.
    [3]YANG Jun, HUANG Dongya, WANG Yue, MO Manman, LIN Baichun, YANG Shu. Research and Application Progress on Production of Anisotropic NdFeB Magnetic Powder by HDDR Process[J]. Development and Application of Materials, 2023, 38(2): 97-108.
    [4]WANG Han, SHI Bo-wen, NIU Jian-min, LIU Ji-li. Study on Superelastic Anisotropy Parameters and Numerical Calculation of Columnar-grained Cu-Al-Mn Shape Memory Alloy[J]. Development and Application of Materials, 2022, 37(2): 1-9.
    [5]LI Bobo, ZHANG Qiang, PEI Teng, LIU Yinqi, ZHU Junjie, LI Yang. Study on Rolling Structure and Properties of TC4 Titanium Alloy EB Slab[J]. Development and Application of Materials, 2020, 35(1): 5-9.
    [6]SUN Jiangang, GAO Fuyang, GAO Qi, JIN Xiangdong. Study on Microstructure and Properties of Hot-wire-TIG Welded Joint of TC4 Titanium Alloy[J]. Development and Application of Materials, 2019, 34(2): 9-13. DOI: 10.19515/j.cnki.1003-1545.2019.02.002
    [7]YANG Jun, YANG Caiyun, CHENG Huanhuan, HUANG Dongya, ZHANG Yilun. Research Progress of Anisotropic NdFeB Magnetic Powders by HDDR Process[J]. Development and Application of Materials, 2019, 34(1): 98-105. DOI: 10.19515/j.cnki.1003-1545.2019.01.019
    [8]JI Dawei, LIU Yinqi, CHEN Tao, HAO Xiaobo, ZHANG Yi. Research on the Anisotropy of Tensile Properties and Impact Toughness of Ti75 Alloy Plate[J]. Development and Application of Materials, 2016, 31(5): 53-58. DOI: 10.19515/j.cnki.1003-1545.2016.05.013
    [9]LIU Xilin, XU Jialei, WANG Ying, GENG Yongliang, WANG Gang. Structure and Mechanical properties of Welded Joint of 33 mm-thick TC4 Titanium Alloy by Electron Beam Welding Technique[J]. Development and Application of Materials, 2016, 31(5): 49-52. DOI: 10.19515/j.cnki.1003-1545.2016.05.012
    [10]YANG Hai-ying, CHEN Jun, ZHAO Yong-qing. Effect of Heat Treatment on Microstructure and Mechanical Properties of TC4-DT Alloy[J]. Development and Application of Materials, 2009, 24(2): 13-16. DOI: 10.19515/j.cnki.1003-1545.2009.02.004

Catalog

    Article Metrics

    Article views (35) PDF downloads (2) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return