Citation: | GE Yun-ke, GU Xiao-bo, YU Li-hua, XU Jun-hua. Investigation of Phase Structure and Properties of (Zr,Al)N Coatings[J]. Development and Application of Materials, 2008, 23(1): 21-25,37. DOI: 10.19515/j.cnki.1003-1545.2008.01.006 |
[1] | YAO Rongyi, ZHANG Xiangdong, GUAN Hongtao, WU Guojing. Research on Phased Array Ultrasonic Flaw Detection of Common Defects in Composite Materials by Infusion[J]. Development and Application of Materials, 2022, 37(1): 55-58,65. |
[2] | LIU Qianli, DENG Xianhui, FAN Jinwei, TIAN Dehou, JIANG Feng, ZHANG Linlin, JIANG Peng. Analysis on Surface Defect of Ultra-long and Ultra-thin Titanium Slab Ingot during Electron Beam Cold Hearth Melting[J]. Development and Application of Materials, 2020, 35(5): 69-75. |
[3] | TAO Huifa, LI Bobo, LIU Yinqi. Analysis on Cracks in Cold Rolled Titanium Coil[J]. Development and Application of Materials, 2020, 35(1): 10-13. |
[4] | LI Bo-bo, CHEN Tao, LIU Yin-qi, BAO Shu-juan. Analysis on Delamination Defects of Cold Rolled Titanium Strip[J]. Development and Application of Materials, 2015, 30(5): 35-39. DOI: 10.19515/j.cnki.1003-1545.2015.05.007 |
[5] | HUANG Wei-zhong, LIN Ying-jun, ZHOU Jian. Relationship between Particle Defects of PVC and Filler Size[J]. Development and Application of Materials, 2015, 30(2): 26-31. DOI: 10.19515/j.cnki.1003-1545.2015.02.006 |
[6] | GUO Hai-xia, LI Xue-feng, YANG Zhi-yong. Introduction of a Method for Phase Quantitative Analysis by Using Softwares[J]. Development and Application of Materials, 2014, 29(1): 76-78. DOI: 10.19515/j.cnki.1003-1545.2014.01.018 |
[7] | QIAO Dong-ping. Application of Ultrasonic Phased Array in Inspection of Buoyancy Materials[J]. Development and Application of Materials, 2013, 28(6): 67-70. DOI: 10.19515/j.cnki.1003-1545.2013.06.015 |
[8] | CHEN Wei, ZHAN Yao, GAOZhen-xuan. Defects and Process Control in Production of Copper-Nickel Alloy Ingot Casting[J]. Development and Application of Materials, 2012, 27(6): 54-57. DOI: 10.19515/j.cnki.1003-1545.2012.06.013 |
[9] | Fu Bufang. Analyses on Defects of Manual Molding RPUF[J]. Development and Application of Materials, 2002, 17(2): 31-33. DOI: 10.19515/j.cnki.1003-1545.2002.02.010 |
[10] | Guo Junjie. The Method of Quantitive Evaluation for Selecting Materials[J]. Development and Application of Materials, 2000, 15(3): 43-45. DOI: 10.19515/j.cnki.1003-1545.2000.03.016 |