Volume 38 Issue 3
Jun.  2023
Turn off MathJax
Article Contents
Abstract
References
Related Articles
YE Weiwei, SU Yali, LI Chenguo, YE Zhangji. Protection for Leading Edge of Wind Turbine Blade[J]. Development and Application of Materials, 2023, 38(3): 82-87.
Citation: YE Weiwei, SU Yali, LI Chenguo, YE Zhangji. Protection for Leading Edge of Wind Turbine Blade[J]. Development and Application of Materials, 2023, 38(3): 82-87.
shu

Protection for Leading Edge of Wind Turbine Blade

  • Xiamen Sunrui Ship Coating Co., Ltd., Xiamen 361000, China

More Information
  • Received Date: March 29, 2022
  • Available Online: July 09, 2023
    Graphical Abstract
    • Abstract
  • Renewable energy based on wind energy is regarded as the most promising energy source of all energy sources available today. It has become an essential part of the new power supply. Wind turbine blades are crucial and relevant to the operating efficiency and service life of turbines. However, the working conditions of wind turbines are poor, and they are usually located in high or low temperatures, acid-base corrosion, and sandstorm environments. The blade's leading edge is highly prone to erode due to its high linear velocity. Here are summarized the factors affecting the leading-edge protection of wind turbine blades, and the protection scheme of the leading edge protection, and is put forward the problems existing in the development of the protection for the leading edge of the wind turbine blade protection.
    • FullText(HTML)
    • References (27)
  • [1]
    KARTHIKEYAN N, ANAND R B, SUTHAKAR T, et al. Materials, innovations and future research opportunities on wind turbine blades-insight review[J]. Environmental Progress & Sustainable Energy, 2019, 38(3): e13046.
    [2]
    NAZIR M S, ALI N, BILAL M, et al. Potential environmental impacts of wind energy development: a global perspective[J]. Current Opinion in Environmental Science & Health, 2020, 13: 85-90.
    [3]
    SUN X J, HUANG D G, WU G Q. The Current state of offshore wind energy technology development[J]. Energy, 2012, 41(1): 298-312.
    [4]
    DAI J C, YANG X, WEN L. Development of wind power industry in China: a comprehensive assessment[J]. Renewable and Sustainable Energy Reviews, 2018, 97: 156-164.
    [5]
    CEN H T, TIAN W L, LI P W, et al. Simulation analysis on polyurethane coating of wind blade[J]. Journal of Shanghai Jiaotong University (Science), 2019, 24(4): 496-499.
    [6]
    HERRING R, DYER K, MARTIN F, et al. The increasing importance of leading edge erosion and a review of existing protection solutions[J]. Renewable and Sustainable Energy Reviews, 2019, 115: 109382.
    [7]
    CHEN J L, WANG J H, NI A Q. A review on rain erosion protection of wind turbine blades[J]. Journal of Coatings Technology and Research, 2019, 16(1): 15-24.
    [8]
    王晓, 王华进, 赵薇, 等. 风电叶片涂料用树脂研究进展[J]. 表面技术, 2016, 45(6): 28-35.
    [9]
    CORTÉS E, SÁNCHEZ F, DOMENECH L, et al. Manufacturing issues which affect coating erosion performance in wind turbine blades[C]//AIP Conference Proceedings. Penang, Malaysia. Author(s), 2017: 1-6.
    [10]
    BRUNTON J H. Treatise on materials science and te-chnology: Rochester, Erosion of solid surfaces by the impact of liquid drops[M]. New York: Academic press, 1979, 186-248.
    [11]
    GRUNDWVRMER M, NUYKEN O, MEYER M, et al. Sol-gel derived erosion protection coatings against damage caused by liquid impact[J]. Wear, 2007, 263(1-6): 318-329.
    [12]
    ZHANG S Z, DAM-JOHANSEN K, NØRKJЛЕR S, et al. Erosion of wind turbine blade coatings-Design and analysis of jet-based laboratory equipment for performance evaluation[J]. Progress in Organic Coatings, 2015, 78: 103-115.
    [13]
    CORTÉS E, SÁNCHEZ F, O'CARROLL A, et al. On the material characterisation of wind turbine blade coatings: the effect of interphase coating-laminate adhesion on rain erosion performance[J]. Materials (Basel, Switzerland), 2017, 10(10): 1146.
    [14]
    GEORGE F, SCHMITT J. Report AFML-TR-79-4122: Liquid and solid particle impact erosion[R]. Ohio: Air Force Materials Laboratory, 1979.
    [15]
    SCHMITT G F. Report AFML-TR-71-197: Materials parameters that govern the rain erosion behavior of polymeric coatings and composites at subsonic velocities[R]. Ohio: Air Force Materials Laboratory, 1971.
    [16]
    PENG H X. Polyurethane nanocomposite coatings for aeronautical applications[M]//Multifunctional Polymer Nanocomposites. New York: CRC Press, 2010: 337-387.
    [17]
    ADLER W, MORRIS J W, WAHL N. Supersonic ra-in and sand erosion research: characterization and development of erosion resistant materials[R]. Air Force Materials Laboratory, 1972.
    [18]
    ENGEL O G. Report No. 53-192: Mechanism of rain erosion[R]. Fairbanks: Wright Air Development Center, 1953.
    [19]
    GODFREY M, SIEDERER O, ZEKONYTE J, et al. The effect of temperature on the erosion of polyurethane coatings for wind turbine leading edge protection[J]. Wear, 2021, 476: 203720.
    [20]
    桂永强, 倪爱清, 王继辉. 风机叶片涂层雨蚀研究[J]. 应用力学学报, 2020, 37(1): 403-410.
    [21]
    AHMAD M, CASEY M, SVRKEN N. Experimental assessment of droplet impact erosion resistance of steam turbine blade materials[J]. Wear, 2009, 267(9-10): 1605-1618.
    [22]
    GOHARDANI O. Impact of erosion testing aspects on current and future flight conditions[J]. Progress in Aerospace Sciences, 2011, 47(4): 280-303.
    [23]
    KJЛЕRSIDE STORM B. Surface protection and coa-tings for wind turbine rotor blades[M]//Advances in Wind Turbine Blade Design and Materials. Amsterdam: Elsevier, 2013: 387-412.
    [24]
    刘正伟. 一种风电叶片模内胶衣: CN106047112A[P]. 2018-12-28.
    [25]
    MISHNAEVSKY L Jr, HASAGER C B, BAK C, et al. Leading edge erosion of wind turbine blades: understanding, prevention and protection[J]. Renewable Energy, 2021, 169: 953-969.
    [26]
    TRUONG H. An experimental and computational st-udy on Co-cured metal-polymer matrix composite interfaces in high temperature hybrid laminates[D]. College Station: Texas A&M University, 2016.
    [27]
    SHIN K C, LEE J J. Prediction of the tensile load-bearing capacity of a co-cured single lap joint considering residual thermal stresses[J]. Journal of Adhesion Science and Technology, 2000, 14(13): 1691-1704.
    • Related Articles

  • Related Articles

    [1]ZHANG Tianyi, LÜ Shasha, RUAN Zhangshun, FU Xiaogang, LONG Bin, TAO Liu, QIN Bo, LI Zhengcao. Research on Preparation of Stellite Alloy Coating and Its Compatibility with Liquid Lead-Bismuth Eutectic Alloy[J]. Development and Application of Materials, 2023, 38(6): 9-14.
    [2]XU Qiang, QI Haixia, CHEN Kaifeng, ZHANG Lili. Study on Surface Treatment Process and Protective Coating System Design of Low-magnetic Stainless Steel[J]. Development and Application of Materials, 2021, 36(6): 31-35.
    [3]XING Shaohua, ZHANG Bo, YAN Yonggui, SUN Mingxian. The Influence of Coating Damage on Cathodic Protection Potential Distribution of Ship[J]. Development and Application of Materials, 2016, 31(1): 69-73. DOI: 10.19515/j.cnki.1003-1545.2016.01.016
    [4]ZHENG Jun-lin, LI Ya-nan. Review on High Temperature Protective Coating Technology for Ships[J]. Development and Application of Materials, 2015, 30(6): 99-102. DOI: 10.19515/j.cnki.1003-1545.2015.06.020
    [5]SA Shi-yong, WU Duo-li, ZHANG Hong-yu, WEI Hua, ZHENG Qi, JIN Tao, SUN Xiao-feng. Hot Corrosion Behaviors of Protective Coatings on M38 Super Alloy[J]. Development and Application of Materials, 2014, 29(5): 57-61. DOI: 10.19515/j.cnki.1003-1545.2014.05.011
    [6]WEI Wei-rong, ZHENG Guo-liang. Design of External Anticorrosion Coating and the Coating Process for Submarine Pipeline[J]. Development and Application of Materials, 2013, 28(2): 30-33. DOI: 10.19515/j.cnki.1003-1545.2013.02.007
    [7]SUN Nai-rong, XU Yu-song, LIU Shao-guang, ZHAO Qi, LUO Lai-ma. Microstructure and Erosion Behavior of Arc Spraying NiTi/Cr3C2 Coat Added with Nano TiC Particles[J]. Development and Application of Materials, 2009, 24(3): 50-55. DOI: 10.19515/j.cnki.1003-1545.2009.03.014
    [8]ZHAO Yu-ling, FENG Ping, ZHANG Xiao-ming, XIONG Wei-hao. Advance in Coated Cemented Carbide[J]. Development and Application of Materials, 2009, 24(2): 94-101. DOI: 10.19515/j.cnki.1003-1545.2009.02.022
    [9]WANG Jing, LI Xiang-bo, WANG Jia. Preparing Research Progress on the High-temperature Protection Coatings[J]. Development and Application of Materials, 2008, 23(2): 48-51. DOI: 10.19515/j.cnki.1003-1545.2008.02.014
    [10]WANG Yuan-zhi, XU Hai-bo, WANG Ting-yong. Influence of Cathodic Voltage on the Coat ofSteel Samples in Soil[J]. Development and Application of Materials, 2005, 20(1): 43-46. DOI: 10.19515/j.cnki.1003-1545.2005.01.012

  • Cited by

    Periodical cited type(2)

    1. 徐利强，周晓亮，赵建立，方思明，刘梅，王鄯尧，宋佺珉. 风电叶片前缘保护涂料的耐雨蚀试验研究. 涂层与防护. 2025(01): 21-25 .
    2. 许楠，张祺. 风电机组叶片前缘腐蚀问题及防护技术. 风能. 2024(03): 62-66 .

    Other cited types(0)

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (268) PDF downloads (18) Cited by(2)
    Related

    Copyright © 《Development and Application of Materials》豫ICP备13020589号-2

    Adress: No.169, Binhe South Road, Luolong District, Luoyang City, Henan Province，China  Tel: (0379)67256265;  (0379)67256345  Email: TG023@163.com

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return