Volume 39 Issue 2
Apr.  2024
Turn off MathJax
Article Contents
Abstract
References
Related Articles
LIU Wang, TIAN Feng, WEI Jianhui, ZHU Bin, ZHOU Helezi, ZHOU Huamin. Research on Hot Stamping Preparation Process and Joint Performance of 6061 Aluminum Alloy/Carbon Fiber Composite Plate[J]. Development and Application of Materials, 2024, 39(2): 111-118.
Citation: LIU Wang, TIAN Feng, WEI Jianhui, ZHU Bin, ZHOU Helezi, ZHOU Huamin. Research on Hot Stamping Preparation Process and Joint Performance of 6061 Aluminum Alloy/Carbon Fiber Composite Plate[J]. Development and Application of Materials, 2024, 39(2): 111-118.
shu

Research on Hot Stamping Preparation Process and Joint Performance of 6061 Aluminum Alloy/Carbon Fiber Composite Plate

  • 1. State Key Laboratory of Materials Processing and Die & Mould Technology, School of MaterialsScience and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China;

  • 2. Wuhan Second Ship Design and Research Institute, Wuhan 430205, China

More Information
  • Received Date: April 22, 2023
  • Available Online: May 08, 2024
    Graphical Abstract
    • Abstract
  • Composite structural components play a vital role in the lightweight ships, and the stability of their joint performance is of great significance for the safety and transportation efficiency of the vessel. The application of the aluminum alloy and carbon fiber reinforced polymers (CFRP) composite materials in the manufacture of ship bulkheads, frames, and other structural components not only significantly reduces the weight but also enhances the overall strength, balances the overall toughness of the composite material, and exhibits high impact energy absorption capability. In order to explore the feasibility of stamping-bonding by hot stamping process for aluminum alloy and CFRP, using peeling test, the effects of different surface treatments for 6061 aluminum alloy, different holding time in stamping-bonding stage, and surface modification of prepreg materials on the properties of the aluminum alloy/CFRP composite joints are studied. The results show that the shear strengths of the joint after polishing, polishing and alkali cleaning, and polishing and acid cleaning on the surface of aluminum alloy are 2.50 MPa, 4.30 MPa and 4.60 MPa, respectively, which are 155.1 %, 338.8 % and 369.4 % higher than that of the untreated joint sample. In the stamping-bonding stage, when the holding time is less than 60 s, the joint shear strength increases rapidly to about 4.90 MPa. When the holding time is more than 60 s, the joint's shear strength decreases first, then increases slowly, and at last keeps stable in the range of 3.92 to 4.34 MPa. When the surface of the prepreg is sprayed with Graphene Oxide (GO), the shear strength of the joint is 5.98 MPa, which is 30.0 % higher than that of the joint with the prepreg untreated.
    • FullText(HTML)
    • References (19)
  • [1]
    林琛. 盐雾环境下缝合复合材料Ⅰ型层间断裂韧性的研究[D]. 天津:天津工业大学, 2021.
    [2]
    HERRMANN C, DEWULF W, HAUSCHILD M, et al. Life cycle engineering of lightweight structures[J]. CIRP Annals, 2018, 67(2):651-672.
    [3]
    SUN X, MENG F R, LIU J R, et al. Life cycle energy use and greenhouse gas emission of lightweight vehicle-A body-in-white design[J]. Journal of Cleaner Production, 2019, 220:1-8.
    [4]
    HIRSCH J. Recent development in aluminium for automotive applications[J]. Transactions of Nonferrous Metals Society of China, 2014, 24(7):1995-2002.
    [5]
    GHIOTTI A, SIMONETTO E, BRUSCHI S. Influence of process parameters on tribological behaviour of AA7075 in hot stamping[J]. Wear, 2019, 426-427:348-356.
    [6]
    HEGDE S, SATISH SHENOY B, CHETHAN K N. Review on carbon fiber reinforced polymer (CFRP) and their mechanical performance[J]. Materials Today:Proceedings, 2019, 19:658-662.
    [7]
    ZHANG C, ZHENG D J, SONG G L, et al. Influence of microstructure of carbon fibre reinforced polymer on the metal in contact[J]. Journal of Materials Research and Technology, 2020, 9(1):560-573.
    [8]
    ZHANG Q, GAO Q, CAI J. Experimental and simulation research on thermal stamping of carbon fiber composite sheet[J]. Transactions of Nonferrous Metals Society of China, 2014, 24(1):217-223.
    [9]
    韩宾, 王宏, 于杨惠文, 等. 碳纤维增强热塑性复合材料盒形件热冲压成型研究[J]. 航空制造技术, 2017, 60(16):40-45.
    [10]
    DHALIWAL G S, NEWAZ G M. Experimental and numerical investigation of flexural behavior of hat sectioned aluminum/carbon fiber reinforced mixed material composite beam[J]. Composites Part B:Engineering, 2020, 182:107642.
    [11]
    YU H Y, SHI H R, CHEN S J. A novel multi-cell CFRP/AA6061 hybrid tube and its structural multiobjective optimization[J]. Composite Structures, 2019, 209:579-589.
    [12]
    WANG S L, LIANG W, DUAN L M, et al. Effects of loading rates on mechanical property and failure behavior of single-lap adhesive joints with carbon fiber reinforced plastics and aluminum alloys[J]. The International Journal of Advanced Manufacturing Technology, 2020, 106(5-6):2569-2581.
    [13]
    吴志刚. 碳纤维增强环氧树脂基复合材料的研究进展[J]. 天津科技, 2018, 45(7):53-58.
    [14]
    PRAMANIK A, BASAK A K, DONG Y, et al. Joi-ning of carbon fibre reinforced polymer (CFRP) composites and aluminium alloys-A review[J]. Composites Part A:Applied Science and Manufacturing, 2017, 101:1-29.
    [15]
    田丰. 高强铝合金板/CFRP材料热冲压成形研究[D]. 武汉:华中科技大学, 2021.
    [16]
    SALEEMA N, SARKAR D K, PAYNTER R W, et al. A simple surface treatment and characterization of AA6061 aluminum alloy surface for adhesive bonding applications[J]. Applied Surface Science, 2012, 261:742-748.
    [17]
    KIM W S, KIM K H, JANG C J, et al. Micro-and nano-morphological modification of aluminum surface for adhesive bonding to polymeric composites[J]. Journal of Adhesion Science and Technology, 2013, 27(15):1625-1640.
    [18]
    朱彬, 刘旺, 田丰, 等. 高强钢/碳纤维增强复合材料热冲压-连接一体化工艺可行性及试样弯曲性能研究[J]. 中国机械工程, 2021, 32(24):2975-2980.
    [19]
    胡晓兰, 周川, 代少伟, 等. 氧化石墨烯改性不同表面性质的碳纤维/环氧树脂复合材料的微观形貌与动态热力学性能[J]. 复合材料学报, 2020, 37(5):1070-1080.
    • Related Articles

  • Related Articles

    [1]ZHANG Hengkun, LUO Xianfu, SHEN Pengyang, ZHANG Wenli, ZHA Xiaoqin. Effect of Sensitization Treatment on Intergranular Corrosion Property of 825 Alloy[J]. Development and Application of Materials, 2024, 39(2): 50-56.
    [2]CHEN Liyang, LIU Lele, ZHAO Yanying, CHEN Bin, ZHANG Linlin, HAN Guang. Effect of Homogenizing Treatment on Microstructure and Mechanical Properties of As-cast HMn58-2 Alloy[J]. Development and Application of Materials, 2022, 37(5): 16-21.
    [3]CHU Shaoqi, ZHOU Yang, ZHANG Fanxing, LIU Haibin, LI Li, WANG Pengyun, YANG Shengli. Effect of Sensitization Time on the Microstructure and Properties of Domestic 5083-H116 Aluminum Alloy[J]. Development and Application of Materials, 2021, 36(5): 16-19.
    [4]HUANG Anqi, LI Xuefeng, GAO Lingqing, GUO Haixia. Analysis on Bending Cracking of 2205 Stainless Steel Plate after Intergranular Corrosion Experiment[J]. Development and Application of Materials, 2019, 34(5): 1-5,15. DOI: 10.19515/j.cnki.1003-1545.2019.05.001
    [5]ZHANG Yun-qian, WANG Hong-ren. Iron Anode Falling off Analysis and Countermeasures of Tianwan NPP Condenser Water Chambers[J]. Development and Application of Materials, 2014, 29(5): 46-51. DOI: 10.19515/j.cnki.1003-1545.2014.05.009
    [6]GAO Yang, CHENG Wen-hua, GUO Wei-min, FU Yu-bin. Preparation and Corrosion Behavior of Fe-C Sensitive Film on Optical Fiber[J]. Development and Application of Materials, 2013, 28(4): 36-40. DOI: 10.19515/j.cnki.1003-1545.2013.04.009
    [7]ZHANG Juan-juan, NING Tian-xin, WANG Jia-min, FAN Fang-xiong. Study on Embrittlement Mechanism of Duplex Stainless Steel 00Cr25Ni7Mo4N in Sensitization Heat Treatment[J]. Development and Application of Materials, 2009, 24(5): 21-24. DOI: 10.19515/j.cnki.1003-1545.2009.05.005
    [8]FENG Lei, CHENG Yong-qing, QIN Hua-yu, LUO Dong-wei. Development of Nano-TiO2 Dye-sensitized Solar Cells[J]. Development and Application of Materials, 2009, 24(3): 81-85. DOI: 10.19515/j.cnki.1003-1545.2009.03.020
    [9]HUANG Yan-liang, Brian Kinsella, Thomas Becker, HUANG Si-di, ZHANG Yang-yang. Identification of Sensitization of Austenitic Stainless Steel to Intergranular Stress Corrosion Cracking by Atomic Force Microscopy[J]. Development and Application of Materials, 2008, 23(3): 7-11. DOI: 10.19515/j.cnki.1003-1545.2008.03.002
    [10]ZHANG Bao-wei, WEI Jin-shan, ZHANG Tian-hong. An Investigation on Local Brittle Zone of 10Ni5CrMoV Steel after Twice Thermal Cycle[J]. Development and Application of Materials, 2004, 19(3): 25-28,32. DOI: 10.19515/j.cnki.1003-1545.2004.03.008

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (150) PDF downloads (24) Cited by()
    Related

    Copyright © 《Development and Application of Materials》豫ICP备13020589号-2

    Adress: No.169, Binhe South Road, Luolong District, Luoyang City, Henan Province，China  Tel: (0379)67256265;  (0379)67256345  Email: TG023@163.com

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return