Wang Renfu. Study on the Deformation Hardening Ability of 9Ni3CrMoV Steel[J]. Development and Application of Materials, 2001, 16(1): 15-17,32. DOI: 10.19515/j.cnki.1003-1545.2001.01.004
Citation: Wang Renfu. Study on the Deformation Hardening Ability of 9Ni3CrMoV Steel[J]. Development and Application of Materials, 2001, 16(1): 15-17,32. DOI: 10.19515/j.cnki.1003-1545.2001.01.004

Study on the Deformation Hardening Ability of 9Ni3CrMoV Steel

More Information
  • Received Date: August 31, 2000
  • Available Online: June 14, 2024
  • Round-section specimens instead of plate specimens which were sampled from different position and direction out of three thickness 9Ni3CrMoV plate steels of 36mm, 50mm and 80mm were prepared to measure the tensive flow behaivor.The work hardening exponents(n value) were calculated out of the obtained curves, and the influence of sampling position and direction on n value was investigated.The results indicate that the sampling position and direction have little effect on n value.The n value is linearly proportional to σsσb or σs.Under the maxium load,the true strain or εb of 9Ni3CrMoV steel is less than n value, and their quantitative difference is within 10 percent.
  • Related Articles

    [1]WANG Renfu, HE Liang, SUN Lei. Study on Fatigue Performance of Local Dense Weld Structures of Ship Hulls[J]. Development and Application of Materials, 2023, 38(5): 31-36.
    [2]DING Penglong, CHENG Yingjin, HE Liang. Numerical Simulation and Control of Block Welding Deformation of Large Steel Deck[J]. Development and Application of Materials, 2023, 38(1): 9-16.
    [3]LUO Xianfu, ZHANG Wenli, CHEN Fei, SUN Chao, ZHANG Hengkun, CAI Jiaxing, ZHA Xiaoqin, LIU Xiaoyong. Research on Local Corrosion Behavior of High Manganese Austenitic Steel[J]. Development and Application of Materials, 2022, 37(6): 83-91.
    [4]SUN Erju, QIU Shengwen, XU Feifan, LIU Zhiying. High Temperature Deformation Behavior and Constitutive Equations of TA22 Titanium Alloy[J]. Development and Application of Materials, 2020, 35(4): 6-10.
    [5]YU Xiangfei, CHEN Huidong, LIU Guoyuan, LI Wenfu, LIU Hanqiang. Study on Cold Deformability,Mechanical Properties and Uniformity of Large Round ODSC[J]. Development and Application of Materials, 2016, 31(6): 61-65. DOI: 10.19515/j.cnki.1003-1545.2016.06.013
    [6]QU Yin-hua, SUN Jian-ke, MENG Xiang-jun. An lnvestigation on Mechanic Behavior of TC4 Alloy During Hot Compression Deformation[J]. Development and Application of Materials, 2006, 21(2): 24-29. DOI: 10.19515/j.cnki.1003-1545.2006.02.006
    [7]ZHANG Bao-wei, WEI Jin-shan, ZHANG Tian-hong. An Investigation on Local Brittle Zone of 10Ni5CrMoV Steel after Twice Thermal Cycle[J]. Development and Application of Materials, 2004, 19(3): 25-28,32. DOI: 10.19515/j.cnki.1003-1545.2004.03.008
    [8]Xing Ruyi, Kang Buxi, Su Juanhua, Tian Baohong, Liu Ping. Study on Micro Hardness and Conductivity of Cu-Cr-Zr Alloy[J]. Development and Application of Materials, 2003, 18(4): 21-22,46. DOI: 10.19515/j.cnki.1003-1545.2003.04.006
    [9]Zhang Lingfeng, Liu Ping, Kang Buxi, Zhao Dongmei, Tian Baohong, Dong Qiming. Effect of Aging and Cold Deforming on Microstructure and Performance of Cu-3.2Ni-0.75Si-0.30Zn Alloy[J]. Development and Application of Materials, 2003, 18(3): 10-13. DOI: 10.19515/j.cnki.1003-1545.2003.03.004
    [10]Zhang Keke, Yang Yunlin, Shi Hongxin, Wang Zhangsheng, Xue Jin. Analysis of Deformation Characteristic of Superplastic Welding Joint[J]. Development and Application of Materials, 2001, 16(4): 24-27. DOI: 10.19515/j.cnki.1003-1545.2001.04.007

Catalog

    Article Metrics

    Article views (34) PDF downloads (0) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return