XIE Shun, ZHU Baoqi, ZOU Jianglin. Comparison of Spectrometric Measurements of Plasma Temperature in Laser Penetration Welding[J]. Development and Application of Materials, 2023, 38(5): 70-74,85.
Citation: XIE Shun, ZHU Baoqi, ZOU Jianglin. Comparison of Spectrometric Measurements of Plasma Temperature in Laser Penetration Welding[J]. Development and Application of Materials, 2023, 38(5): 70-74,85.

Comparison of Spectrometric Measurements of Plasma Temperature in Laser Penetration Welding

More Information
  • Received Date: May 22, 2023
  • Available Online: November 06, 2023
  • The spectrum of the CO2 laser deep penetration welding plasma and fiber laser welding plume is recorded by using a spectrometer. Both the relative intensity method and the Boltzmann plot method are used to calculate the plasma temperature. The results show that, for the same plasma, very different temperatures are figured out with relative intensity method, when different peaks are chosen. However, the calculated plasma temperatures are very similar with Boltzmann plot method when different spectrum peaks are used. Comparison of the results indicates that the measured temperature is more accurate and reliable with the Boltzmann plot method. Then Boltzmann diagram method is used to calculate the plume temperature, and it is found out that the continuous spectrum intensity of the fiber laser welding plume radiation line cannot be ignored, which is slightly different from the calculation of the plasma temperature.
  • [1]
    SETO N, KATAYAMA S, MIZUTANI M, et al. Relationship between plasma and keyhole behavior during CO2 laser welding[C]//Proc SPIE 3888, High-Power Lasers in Manufacturing, 2000, 3888: 61-68.
    [2]
    SZYMANSKI Z, HOFFMAN J, KURZYNA J. Plasma plume oscillations during welding of thin metal sheets with a CW CO2 laser[J]. Journal of Physics D: Applied Physics, 2001, 34(2): 189-199.
    [3]
    POUEYO-VERWAERDE A, FABBRO R, DESHO-RS G, et al. Experimental study of laser-induced plasma in welding conditions with continuous CO2 laser[J]. Journal of Applied Physics, 1993, 74(9): 5773-5780.
    [4]
    SZYMANSKI Z, KURZYNA J, KALITA W. The sp-ectroscopy of the plasma plume induced during laser welding of stainless steel and titanium[J]. Journal of Physics D: Applied Physics, 1997, 30(22): 3153-3162.
    [5]
    HOFFMAN J, SZYMA SKI Z. Time-dependent spectroscopy of plasma plume under laser welding conditions[J]. Journal of Physics D: Applied Physics, 2004, 37(13): 1792-1799.
    [6]
    RIBIC B, BURGARDT P, DEBROY T. Optical emission spectroscopy of metal vapor dominated laser-arc hybrid welding plasma[J]. Journal of Applied Physics, 2011, 109(8): 1-10.
    [7]
    MILLER R, DEBROY T. Energy absorption by meta-lvapor-dominated plasma during carbon dioxide laser welding of steels[J]. Journal of Applied Physics, 1990, 68(5): 2045-2050.
    [8]
    SZYMANSKI Z, PERADZYNSKI Z, KURZYNA J, et al. Spectroscopic study of a supersonic jet of laser-heated argon plasma[J]. Journal of Physics D: Applied Physics, 1997, 30(6): 998-1006.
    [9]
    TU J F, INOUE T, MIYAMOTO I. Quantitative characterization of keyhole absorption mechanisms in 20 kW-class CO2 laser welding processes[J]. Journal of Physics D: Applied Physics, 2003, 36(2): 192-203.
    [10]
    LIU L M, HAO X F. Study of the effect of low-power pulse laser on arc plasma and magnesium alloy target in hybrid welding by spectral diagnosis technique[J]. Journal of Physics D: Applied Physics, 2008, 41(20): 205202.
    [11]
    KAWAHITO Y, KINOSHITA K, MATSUMOTO N, et al. Effect of weakly ionised plasma on penetration of stainless steel weld produced with ultra high power density fibre laser[J]. Science and Technology of Welding and Joining, 2008, 13(8): 749-753.
    [12]
    KAWAHITO Y, MATSUMOTO N, MIZUTANI M, et al. Characterisation of plasma induced during high power fibre laser welding of stainless steel[J]. Science and Technology of Welding and Joining, 2008, 13(8): 744-748.
    [13]
    SABBAGHZADEH J, DADRAS S, TORKAMANY M J. Comparison of pulsed Nd:YAG laser welding qualitative features with plasma plume thermal characteris-tics[J]. Journal of Physics D: Applied Physics, 2007, 40(4): 1047-1051.
    [14]
    LACROIX D, JEANDEL G, BOUDOT C. Spectrosc-opic characterization of laser-induced plasma created during welding with a pulsed Nd: YAG laser[J]. Journal of Applied Physics, 1997, 81(10): 6599-6606.
    [15]
    National Institute of Standards and Technology data-base. https://physics.nist.gov/PhysRefData/ASD/lines_form.html.
    [16]
    SATTMANN R, STURM V, NOLL R. Laser-induced breakdown spectroscopy of steel samples using multiple Q-switch Nd: YAG laser pulses[J]. Journal of Physics D: Applied Physics, 1995, 28(10): 2181-2187.
    [17]
    FUHR J R, MARTIN G A, WLESE W L, et al. Atomic transition probabilities for iron, cobalt, and nickel (a critical data compilation of allowed lines)[J]. Journal of Physical and Chemical Reference Data, 1981, 10(2): 305-566.
    [18]
    ZOU J L, XIAO R S, HUANG T, et al. Plume temperature diagnosis with the continuous spectrum and Wien’s displacement law during high power fiber laser welding[J]. Laser Physics, 2014, 24(10): 106007.
  • Related Articles

    [1]MENG Jiawei, LÜ Yanhong, CUI Tangyin, BAI Li, XU Haisen, FANG Huiyi, WANG Peng. Effect of Calcination Conditions on Synthesis of Ultrafine ZrB2 Powder by Sol-Gel Method[J]. Development and Application of Materials, 2024, 39(3): 77-81.
    [2]LU Qiaoying. Lattice Boltzmann Simulation of Thermal Marangoni Convection of Al2O3-H2O Nanofluids in Square Cavity[J]. Development and Application of Materials, 2021, 36(2): 1-10.
    [3]GE Zichao. Numerical Simulation of Flow and Heat Transfer Characteristics of Cu-H2O Nanofluids in Microchannel[J]. Development and Application of Materials, 2020, 35(5): 18-26.
    [4]LIU Pan, HE Pengfei, DU Lili. Evaluation of the Uncertainty for the Determination of the Molybdenum Content in Molybdenum Iron by Gravimetric Method based on Monte Carlo Method[J]. Development and Application of Materials, 2018, 33(4): 44-48. DOI: 10.19515/j.cnki.1003-1545.2018.04.008
    [5]LIU Rui, LI Huiying. Study on the Application of Infrared Absorption Method in Carbon Analysis of Vanadium[J]. Development and Application of Materials, 2017, 32(4): 50-54. DOI: 10.19515/j.cnki.1003-1545.2017.04.008
    [6]FU Junsheng, HAO Hongmei, ZHANG Zhong. Determination of Mo and Zr in Al-Mo-Zr Alloy by Inductively Coupled Plasma Atomic Emission Spectrometric Inner Standard Method[J]. Development and Application of Materials, 2016, 31(1): 78-82. DOI: 10.19515/j.cnki.1003-1545.2016.01.018
    [7]YU Hai-tao, WU Liang, LI Guo-hui. The Method of Quasi-optical Resonator for the Measurement of Complex Permittivity of Dielectric Materials[J]. Development and Application of Materials, 2010, 25(3): 54-56. DOI: 10.19515/j.cnki.1003-1545.2010.03.013
    [8]CHEN Sai-shan, LI Cheng. Synthesis of Ca3Co4O9 Powder by EDTA Complexing Sol-Gel Method[J]. Development and Application of Materials, 2010, 25(3): 47-50. DOI: 10.19515/j.cnki.1003-1545.2010.03.011
    [9]LI Xian-xue, WANG Wen-ju, QIU Guo-biao, LUO Xiao-ming, SU Shi-jie. Preparation of Polycrystalline Nd:YAG Nanopowders via Gel Combustion Method[J]. Development and Application of Materials, 2009, 24(2): 33-38. DOI: 10.19515/j.cnki.1003-1545.2009.02.009
    [10]Du Guihuan, Jin Minghui, Qu Xuejun, Zhao Xinli. Preparation of Nanosize ZnO·Al2O3 Powder by Sol-gel Method[J]. Development and Application of Materials, 2002, 17(2): 22-25. DOI: 10.19515/j.cnki.1003-1545.2002.02.008
  • Cited by

    Periodical cited type(0)

    Other cited types(2)

Catalog

    Article Metrics

    Article views (94) PDF downloads (12) Cited by(2)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return