Citation: | ZHANG Baowei, GAO Zhenpeng, CHEN Xuelong, ZHANG Youjing, GONG Xuhui, DONG Xing. Dynamic Mechanical Characteristics and Constitutive Model of the 10Ni8CrMoV Steel HAZ[J]. Development and Application of Materials, 2022, 37(5): 68-72. |
[1] |
彭冀湘, 张田宏, 邓晚平, 等. 10Ni8CrMoV钢焊接过热区和细晶区的组织与性能[J]. 焊接学报, 2007, 28(3): 105-108.
|
[2] |
牛济泰. 材料和热加工领域的物理模拟技术[M]. 北京: 国防工业出版社, 1999.
|
[3] |
陈为农. 分离式霍普金森(考尔斯基)杆的设计、试验和应用[M]. 北京: 国防工业出版社, 2018: 26-27.
|
[4] |
迈耶斯. 材料的动力学行为[M]. 北京: 国防工业出版社, 2006: 288-289.
|
[5] |
梁浩, 潘复生, 张方举, 等. Mg-3Al-2Zn-2Y合金不同应变率压缩性能研究[J]. 稀有金属材料与工程, 2013, 42(7): 1393-1397.
|
[6] |
徐媛, 向文丽, 杨红斌, 等. TC6钛合金动态压缩变形中“应力塌陷”的形成原因[J]. 稀有金属材料与工程, 2016, 45(4): 1078-1081.
|
[7] |
黄斌, 任维佳, 张艳敏, 等. 魏氏组织TC17钛合金绝热剪切带(ASB)的组织与织构[J]. 稀有金属材料与工程, 2018, 47(9): 2705-2710.
|
[8] |
周甜, 熊毅, 马云飞, 等. 超细晶粒高碳钢的动态力学行为和微观组织演变[J]. 材料热处理学报, 2020, 41(5): 126-132.
|
[9] |
秦建峰, 马永, 姚晓红, 等. 热氧化TC4合金静/动态力学性能研究[J]. 稀有金属材料与工程, 2018, 47(2): 618-623.
|
[10] |
牛晓燕, 李娜, 树学峰. 温度和应变率对低银无铅焊料力学行为的影响[J]. 稀有金属材料与工程, 2014, 43(9): 2167-2171.
|
[1] | GUO Haodong, YANG Chaofei, SUN lei, WANG Renfu, ZHANG Yuxiang, HUANG Dong. Mechanical Behavior and its Intrinsic Model of 10CrNi5MoV Steel in Two-phase Region[J]. Development and Application of Materials, 2024, 39(6): 84-89. |
[2] | LEI Yiwen, LIU Yan, ZHANG Qianwen, HE Wenbo, LI Xifeng. Research Progress on Constitutive Modeling and Simulation of Electrically-Assisted Forming of Titanium Alloys[J]. Development and Application of Materials, 2024, 39(4): 98-109. |
[3] | XUE Gang. Mathematical Model of the Specimen Shape During the Necking Stage in the Uniaxial Tensile Test[J]. Development and Application of Materials, 2023, 38(3): 1-11,16. |
[4] | GUO Xiang, WANG Min, ZHAO Liming. Research on Elastic Material Parameter Inversion and Prediction Model Based on Dynamic and Static Tests of Rubber Isolator[J]. Development and Application of Materials, 2023, 38(1): 73-80. |
[5] | TONG Zhiyuan, GONG Xuhui. Physical Constitutive Model of Tensile Plastic Strain for 10CrNi8MoV Steel[J]. Development and Application of Materials, 2022, 37(5): 11-15. |
[6] | ZHANG Yajun, ZHANG Xinyao, ZHANG Yunhao. Analysis on Application of Different Models for Fatigue Crack Propagation Rate of Metallic Materials[J]. Development and Application of Materials, 2021, 36(2): 88-92. |
[7] | HE Lei, XUE Gang, ZHU Bingkun. Calculating Model on the Melting Point of CaO-SiO2-CaF2 Slag System[J]. Development and Application of Materials, 2017, 32(2): 7-10. DOI: 10.19515/j.cnki.1003-1545.2017.02.002 |
[8] | KONG Fanjin, CHEN Yongdang, YUAN Zhenyi, WANG Yongjun. A Numerical Model on Cure Process-induced Deformation of Thermoset Composite Parts[J]. Development and Application of Materials, 2016, 31(2): 42-48. DOI: 10.19515/j.cnki.1003-1545.2016.02.009 |
[9] | YANG Shu. Research on Heat Source Model and Numerical Simulation of High Frequency Induction Heating Forming[J]. Development and Application of Materials, 2015, 30(4): 20-23. DOI: 10.19515/j.cnki.1003-1545.2015.04.005 |
[10] | YAO Hong-ying, LIU Xiang-ru. Model of Deformation Rolling Resistance of Steel 195 for Lower Temperature Rolling[J]. Development and Application of Materials, 2009, 24(1): 36-38. DOI: 10.19515/j.cnki.1003-1545.2009.01.011 |